e04rdf reads in a linear semidefinite programming problem (SDP) from a file in sparse SDPA format and returns it in the form which is usable by routines e04raf (initialization), e04ref (linear objective function), e04rnf (linear matrix constraints), e04svf (solver) and e04rzf (deallocation) from the NAG optimization modelling suite.

2 Specification

Fortran Interface

Subroutine e04rdf (

infile, maxnvar, maxnblk, maxnnz, filelst, nvar, nblk, nnz, cvec, nnza, irowa, icola, a, blksizea, ifail)

Integer, Intent (In)	::	infile, maxnvar, maxnblk, maxnnz, filelst
Integer, Intent (Inout)	::	ifail
Integer, Intent (Out)	::	nvar, nblk, nnz, nnza(maxnvar+1), irowa(maxnnz), icola(maxnnz), blksizea(maxnblk)
Real (Kind=nag_wp), Intent (Out)	::	cvec(maxnvar), a(maxnnz)

C Header Interface

#include <nag.h>

void	e04rdf_ (const Integer infile, const Integer maxnvar, const Integer maxnblk, const Integer maxnnz, const Integer filelst, Integer nvar, Integer nblk, Integer nnz, double cvec[], Integer nnza[], Integer irowa[], Integer icola[], double a[], Integer blksizea[], Integer *ifail)

The routine may be called by the names e04rdf or nagf_opt_sdp_read_sdpa.

3 Description

e04rdf is capable of reading linear semidefinite programming problems (SDP) from a text file in sparse SDPA format. The problem is captured and returned in the following form:

\begin{array}{l} \underset{x \in ℝ^{n}}{minimize} & c^{T} x & (a) \\ subject to & \sum_{i = 1}^{n} x_{i} A_{i} - A_{0} ⪰ 0, & (b) \end{array}

(1)

where

A_{i}

denotes symmetric matrices and

c

is a vector. The expression

S ⪰ 0

stands for a constraint on the eigenvalues of a symmetric matrix

S

, namely, all the eigenvalues should be non-negative, i.e., the matrix

S

should be positive semidefinite.

Please note that this form covers even general linear SDP formulations with multiple linear matrix inequalities and a set of standard linear constraints. A set of

m_{A}

linear matrix inequalities

\sum_{i = 1}^{n} x_{i} A_{i}^{k} - A_{0}^{k} ⪰ 0, k = 1, \dots, m_{A}

(2)

can be equivalently expressed as one matrix inequality (1)(b) in the following block diagonal form where the matrices

A_{i}^{1}, A_{i}^{2}, \dots, A_{i}^{m_{A}}

create the diagonal blocks of

A_{i}

\sum_{i = 1}^{n} x_{i} (\begin{matrix} A_{i}^{1} \\ A_{i}^{2} \\ ⋱ \\ A_{i}^{m_{A}} \end{matrix}) - (\begin{matrix} A_{0}^{1} \\ A_{0}^{2} \\ ⋱ \\ A_{0}^{m_{A}} \end{matrix}) ⪰ 0 .

In addition, notice that if all matrices

A_{i}^{k}

belonging to the same block, say block

k

, are themselves diagonal matrices (or have dimension

1 \times 1

), the associated matrix inequality

\sum_{i = 1}^{n} x_{i} A_{i}^{k} - A_{0}^{k} ⪰ 0

(3)

defines actually a standard linear constraint

B x \geq l

where

l

and columns of the matrix

B

are formed by the diagonals of matrices

A_{0}^{k}

and

A_{1}^{k}, \dots, A_{n}^{k}

, respectively. Precisely,

l_{i} = {(A_{0}^{k})}_{i i}

and

b_{i j} = {(A_{j}^{k})}_{i i}

. See Section 10.

3.1 Sparse SDPA file format

The problem data is written in an ASCII input file in a SDPA sparse format which was first introduced in Fujisawa et al. (1998). In the description below we follow closely the specification from Borchers (1999).

The format is line oriented. If more elements are required on the line they need to be separated by a space, a tab or any of the special characters ‘,’, ‘(’, ‘)’, ‘{’ or ‘}’. The file consists of six sections:

1.Comments. The file can begin with arbitrarily many lines of comments. Each line of comments must begin with ‘"’ or ‘*’.
2.The first line after the comments contains integer $n$ , the number of variables. The rest of this line is ignored.
3.The second line after the comments contains integer $m_{A}$ , the number of blocks in the block diagonal structure of the matrices. Additional text on this line after $m_{A}$ is ignored.
4.The third line after the comments contains a vector of $m_{A}$ integers that give the sizes of the individual blocks. Negative numbers may be used to indicate that a block is actually a diagonal submatrix. Thus a block size of ‘ $- 5$ ’ indicates a $5$ by $5$ block in which only the diagonal elements are nonzero.
5.The fourth line after the comments contains an $n$ -dimensional real vector defining the objective function vector $c$ .
6.The remaining lines of the file contain nonzero entries in the constraint matrices, with one entry per line. The format for each line is
$matno blkno i j entry$
where $matno$ is the number $(0, \dots, n)$ of the matrix to which this entry belongs and $blkno$ specifies the block number $k = 1, 2, \dots, m_{A}$ within this matrix. Together, they uniquely identify the block $A_{matno}^{blkno}$ . Integers $i$ and $j$ are one-based indices which specify a location of the entry within the block. Note that since all matrices are assumed to be symmetric, only entries in the upper triangle of a matrix should be supplied. Finally, $entry$ should give the real value of the entry in the matrix. Precisely, ${(A_{matno}^{blkno})}_{i j} = {(A_{matno}^{blkno})}_{j i} = entry$ .

In the text below and in the file listing (filelst) we use the word ‘token’ as a reference to a group of contiguous characters without a space or any other delimeters.

3.2 Recommendation on how best to use e04rdf

(a)The input file with the problem needs to be opened for reading by x04acf ( $mode = 0$ ). In this way we avoid possible limitations of maximal lengths of lines inherited by Fortran I/O (x04acf uses the formatted stream access mode to bypass the restriction). If the file is opened by other means or standard input is used instead, lines within the file might be truncated which would produce a file format error message. This would most likely happen on the line defining the objective function. Setting $filelst = 1$ might help with possible file formatting errors.
(b)Unless the dimension of the problem (or its overestimate) is known in advance, call e04rdf initially with $maxnvar = 0$ , $maxnblk = 0$ and $maxnnz = 0$ . In this case the exact size of the problem is computed and returned in nvar, nblk and nnz. No other data will be stored and none of the arrays cvec, nnza, irowa, icola, a, blksizea will be referenced. Then the exact storage can be allocated and the file reopened. When e04rdf is called for the second time, the problem is read in and stored in appropriate arrays.
(c)The example in Section 10 shows a typical sequence of calls to solve the problem read in by e04rdf. First an empty handle needs to be initialized by e04raf with nvar variables. This should be followed by calls to e04ref and e04rnf to formulate the objective function and the constraints, respectively. The arguments of both routines use the same naming and storage as in e04rdf so the variables can be passed unchanged; only dima in e04rnf is new and should equal to $SUM (blksizea (1 : nblk))$ and nnzasum in e04rnf is the same as nnz in e04rdf. You may at this point want to modify option settings using e04zmf. If dual variables (Lagrangian multipliers) are required from the solver, sufficient space needs to be allocated. The size is equal to the sum of the number of elements of dense triangular matrices for each block. For further details, see the argument ua of the solver e04svf. The solver should be called and then followed, finally, by a call to e04rzf to deallocate memory associated with the problem.

4 References

Borchers B (1999) SDPLIB 1.2, A Library of semidefinite programming test problems Optimization Methods and Software 11(1) 683–690 http://euler.nmt.edu/~brian/sdplib/

Fujisawa K, Kojima M and Nakata K (1998) SDPA (Semidefinite Programming Algorithm) User's Manual Technical Report B-308 Department of Mathematical and Computing Sciences, Tokyo Institute of Technology.

5 Arguments

1: $infile$ – Integer Input: On entry: the unit number associated with the sparse SDPA data file. Note: that the file needs to be opened in read mode by x04acf with $mode = 0$ .

Constraint: $infile \geq 0$ .
2: $maxnvar$ – Integer Input: On entry: the upper limit for the number of variables in the problem. If it is set to zero, cvec and nnza will not be referenced.

Constraint: $maxnvar \geq 0$ .
3: $maxnblk$ – Integer Input: On entry: the upper limit for the number of matrix constraints (i.e., the number of diagonal blocks within the matrix). If it is set to zero, blksizea will not be referenced.

Constraint: $maxnblk \geq 0$ .
4: $maxnnz$ – Integer Input: On entry: the upper limit on the sum of nonzeros in all matrices $A_{i}^{k}$ , for $i = 0, 1, \dots, nvar$ and $k = 1, 2, \dots, nblk$ . If it is set to zero, irowa, icola and a will not be referenced.

Constraint: $maxnnz \geq 0$ .
5: $filelst$ – Integer Input: On entry: if $filelst \neq 0$ , a listing of the input data is sent to the current advisory message unit (as defined by x04abf). This can be useful for debugging the data file.
If $filelst = 0$ , no listing is produced.
6: $nvar$ – Integer Output
7: $nblk$ – Integer Output
8: $nnz$ – Integer Output: On exit: the actual number of the variables $n$ , matrix constraints $m_{A}$ and number of nonzeros of the problem in the file. This also indicates the exact memory needed in cvec, nnza, irowa, icola, a and blksizea.
9: $cvec (maxnvar)$ – Real (Kind=nag_wp) array Output: On exit: $cvec (i)$ , for $i = 1, 2, \dots, nvar$ , stores the dense vector $c$ of the linear objective function.
10: $nnza (maxnvar + 1)$ – Integer array Output: On exit: $nnza (i + 1)$ , for $i = 0, 1, \dots, nvar$ , stores the number of nonzero elements in matrices $A_{i}$ .
11: $irowa (maxnnz)$ – Integer array Output
12: $icola (maxnnz)$ – Integer array Output
13: $a (maxnnz)$ – Real (Kind=nag_wp) array Output: On exit: irowa, icola and a store the nonzeros in the upper triangle of matrices $A_{i}$ , for $i = 0, 1, \dots, nvar$ , in the coordinate storage, i.e., $irowa (j)$ are one-based row indices, $icola (j)$ are one-based column indices and $a (j)$ are the values of the nonzero elements, for $j = 1, 2, \dots, nnz$ . See Section 9.
14: $blksizea (maxnblk)$ – Integer array Output: On exit: $blksizea (k)$ , for $k = 1, 2, \dots, nblk$ , stores the sizes of the diagonal blocks in matrices $A_{i}$ from the top to the bottom.
15: $ifail$ – Integer Input/Output: On entry: ifail must be set to $0$ , $- 1$ or $1$ to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $- 1$ means that an error message is printed while a value of $1$ means that it is not.

If halting is not appropriate, the value $- 1$ or $1$ is recommended. If message printing is undesirable, then the value $1$ is recommended. Otherwise, the value $- 1$ is recommended since useful values can be provided in some output arguments even when $ifail \neq 0$ on exit. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit: $ifail = 0$ unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

- 1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

Note: in some cases e04rdf may return useful information.

$ifail = 1$: At least one of maxnvar, maxnblk or maxnnz is too small. Suggested values are returned in nvar, nblk and nnz, respectively.

$ifail = 2$: The token on line $〈value〉$ at position $〈value〉$ to $〈value〉$ was not recognized as a valid integer.

$ifail = 3$: The token on line $〈value〉$ at position $〈value〉$ to $〈value〉$ was not recognized as a valid real number.

$ifail = 4$: The token on line $〈value〉$ starting at position $〈value〉$ was too long and was not recognized.

$ifail = 5$: An invalid number of variables was given on line $〈value〉$ .
The number stated there is $〈value〉$ and needs to be at least $1$ .

$ifail = 6$: An invalid number of blocks was given on line $〈value〉$ .
The number stated there is $〈value〉$ and needs to be at least $1$ .

$ifail = 7$: An invalid size of the block number $〈value〉$ was given on line $〈value〉$ .
The number stated there is $〈value〉$ and needs to be nonzero.

$ifail = 8$: Not enough data was given on line $〈value〉$ specifying block sizes.
Expected $m_{A}$ tokens but found only $〈value〉$ .

$ifail = 9$: Not enough data was given on line $〈value〉$ specifying the objective function.
Expected $n$ tokens but found only $〈value〉$ .

$ifail = 10$: Not enough data was given on line $〈value〉$ specifying nonzero matrix elements.
Expected $〈value〉$ tokens but found only $〈value〉$ .

$ifail = 11$: Invalid structural data found on line $〈value〉$ .
The given matrix number is out of bounds. Its value $〈value〉$ must be between $0$ and $n$ (inclusive).

$ifail = 12$: Invalid structural data found on line $〈value〉$ .
The given block number is out of bounds. Its value $〈value〉$ must be between $1$ and $m_{A}$ (inclusive).

$ifail = 13$: Invalid structural data found on line $〈value〉$ .
The given row index is out of bounds, it must respect the size of the block. Its value $〈value〉$ must be between $〈value〉$ and $〈value〉$ (inclusive).

$ifail = 14$: Invalid structural data found on line $〈value〉$ .
The given column index is out of bounds, it must respect the size of the block. Its value $〈value〉$ must be between $〈value〉$ and $〈value〉$ (inclusive).

$ifail = 15$: Invalid structural data found on line $〈value〉$ .
The specified nonzero element is not in the upper triangle.
The row index is $〈value〉$ and column index is $〈value〉$ .

$ifail = 16$: Invalid structural data found on line $〈value〉$ .
The specified element belongs to a diagonal block but is not diagonal.
The row index is $〈value〉$ and column index is $〈value〉$ .

$ifail = 17$: An entry in the constraints with $matno = 〈value〉$ , $blkno = 〈value〉$ , row index $〈value〉$ and column index $〈value〉$ was defined more than once. All entries need to be unique.

$ifail = 18$: A premature end of the input stream. The part defining the dimensions of the blocks was not found.

A premature end of the input stream. The part defining the nonzero entries was not found.

A premature end of the input stream. The part defining the number of blocks was not found.

A premature end of the input stream. The part defining the number of variables was not found.

A premature end of the input stream. The part defining the objective function was not found.

$ifail = 19$: The input stream seems to be empty. No data was read. This might indicate a problem with opening the file, check that x04acf was used correctly.

$ifail = 20$: Reading from the stream caused an unknown error on line $〈value〉$ .

$ifail = 21$: On entry, $infile = 〈value〉$ .
Constraint: $infile \geq 0$ .

On entry, $maxnblk = 〈value〉$ .
Constraint: $maxnblk \geq 0$ .

On entry, $maxnnz = 〈value〉$ .
Constraint: $maxnnz \geq 0$ .

On entry, $maxnvar = 〈value〉$ .
Constraint: $maxnvar \geq 0$ .

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

Not applicable.

8 Parallelism and Performance

e04rdf is not threaded in any implementation.

9 Further Comments

The following artificial example demonstrates how the elements of

A_{i}

matrices are organized within arrays nnza, irowa, icola and a. For simplicity let us assume that

nblk = 1

blksizea (1) = 3

and

nvar = 4

. Please note that the values of the elements were chosen to ease readability rather than to define a valid problem.

Let the matrix constraint (1)(b) be defined by

A_{0} = (\begin{matrix} 0 & 0.1 & 0 \\ 0.1 & 0 & 0.2 \\ 0 & 0.2 & 0.3 \end{matrix}),

A_{1} = (\begin{matrix} 1.1 & 0 & 0 \\ 0 & 1.2 & 1.3 \\ 0 & 1.3 & 1.4 \end{matrix}),

A_{2} ​ empty,

A_{3} = (\begin{matrix} 0 & 0 & 0 \\ 0 & 3.1 & 0 \\ 0 & 0 & 3.2 \end{matrix}),

A_{4} = (\begin{matrix} 4.1 & 4.2 & 4.3 \\ 4.2 & 0 & 0 \\ 4.3 & 0 & 0 \end{matrix}) .

All matrices

A_{i}

have to be symmetric and therefore only the elements in the upper triangles are stored. The table below shows how the arrays would be populated.

irowa	$\begin{matrix} 1 & 2 & 3 \end{matrix}$	$\begin{matrix} 1 & 2 & 2 & 3 \end{matrix}$		$\begin{matrix} 2 & 3 \end{matrix}$	$\begin{matrix} 1 & 2 & 3 \end{matrix}$
icola	$\begin{matrix} 2 & 3 & 3 \end{matrix}$	$\begin{matrix} 1 & 2 & 3 & 3 \end{matrix}$		$\begin{matrix} 2 & 3 \end{matrix}$	$\begin{matrix} 1 & 1 & 1 \end{matrix}$
a	$\underset{︸}{\begin{matrix} 0.1 & 0.2 & 0.3 \end{matrix}}$	$\underset{︸}{\begin{matrix} 1.1 & 1.2 & 1.3 & 1.4 \end{matrix}}$	$\underset{︸}{}$	$\underset{︸}{\begin{matrix} 3.1 & 3.2 \end{matrix}}$	$\underset{︸}{\begin{matrix} 4.1 & 4.2 & 4.3 \end{matrix}}$
	$A_{0}$	$A_{1}$	$A_{2}$	$A_{3}$	$A_{4}$
nnza	$3$	$4$	$0$	$2$	$3$

See also Section 3 in e04rnf which accepts the same format.

10 Example

The following example comes from Fujisawa et al. (1998).

Imagine that we want to store the following problem in a file in the SDPA format.

\begin{array}{l} \underset{x \in ℝ^{2}}{minimize} & 10 x_{1} + 20 x_{2} \\ subject to & (\begin{matrix} 1 & 0 \\ 1 & 1 \end{matrix}) (\begin{matrix} x_{1} \\ x_{2} \end{matrix}) \geq (\begin{matrix} 1 \\ 1.5 \end{matrix}), \\ (\begin{matrix} 5 & 2 \\ 2 & 6 \end{matrix}) x_{2} - (\begin{matrix} 3 & 0 \\ 0 & 4 \end{matrix}) ⪰ 0 . \end{array}

There are two variables (

n = 2

) in the problem. One linear matrix constraint and one block of linear constraints can be formed as (1) with two diagonal blocks (

m_{A} = 2

). Both blocks have dimension

2

but the first one (defining linear constraints) is only diagonal, thus the sizes will be stated as

\begin{matrix} - 2 & 2 \end{matrix}

The problem can be rewritten as

\begin{array}{l} \underset{x \in ℝ^{2}}{minimize} & c^{T} x \\ subject to & A_{1} x_{1} + A_{2} x_{2} - A_{0} ⪰ 0, \end{array}

where

$c = {(\begin{matrix} 10 & 20 \end{matrix})}^{T}$ ,
$A_{0} = (\begin{matrix} 1 & 0 & 0 & 0 \\ 0 & 1.5 & 0 & 0 \\ 0 & 0 & 3 & 0 \\ 0 & 0 & 0 & 4 \end{matrix})$ ,
$A_{1} = (\begin{matrix} 1 & 0 & 0 & 0 \\ 0 & 1 & 0 & 0 \\ 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 \end{matrix})$ ,
$A_{2} = (\begin{matrix} 0 & 0 & 0 & 0 \\ 0 & 1 & 0 & 0 \\ 0 & 0 & 5 & 2 \\ 0 & 0 & 2 & 6 \end{matrix})$ .

The optimal solution is

x^{*} = {(\begin{matrix} 1.0 & 1.0 \end{matrix})}^{T}

with the objective function value

30.0

. The optimal Lagrangian multipliers (dual variables) are

10.0

0.0

and

(\begin{matrix} 20 / 7, & - 20 / 7 \\ - 20 / 7, & 20 / 7 \end{matrix})

See also Section 10 in e04raf for links to further examples in the suite.

e04rd: FL CL CPP AD

NAG FL Interfacee04rdf (sdp_​read_​sdpa)

▸▿ Contents

1 Purpose

2 Specification

3 Description

3.1 Sparse SDPA file format

3.2 Recommendation on how best to use e04rdf

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG FL Interface
e04rdf (sdp_read_sdpa)