g22yaf parses a text string containing a formula specifying a linear model and outputs a G22 handle to an internal data structure. This G22 handle can then be passed to various routines in Chapter G22. In particular, the G22 handle can be passed to g22ycf to produce a design matrix or g22ydf to produce a vector of column inclusion flags suitable for use with routines in Chapter G02.

2 Specification

Fortran Interface

Subroutine g22yaf (

hform, formula, ifail)

Integer, Intent (Inout)	::	ifail
Character (*), Intent (In)	::	formula
Type (c_ptr), Intent (Inout)	::	hform

C Header Interface

#include <nag.h>

void	g22yaf_ (void *hform, const char formula, Integer *ifail, const Charlen length_formula)

The routine may be called by the names g22yaf or nagf_blgm_lm_formula.

3 Description

3.1 Background

Let

D

denote a data matrix with

n

observations on

m_{d}

independent variables, denoted

V_{1}, V_{2}, \dots, V_{m_{d}}

. Let

y

denote a vector of

n

observations on a dependent variable.

A linear model,

M

, as the term is used in this routine, expresses a relationship between the independent variables,

V_{j}

, and the dependent variable. This relationship can be expressed as a series of additive terms

T_{1} + T_{2} + \dots

, with each term,

T_{t}

, representing either a single independent variable

V_{j}

, called the main effect of

V_{j}

, or the interaction between two or more independent variables. An interaction term, denoted here using the

.

operator, allows the effect of an independent variable on the dependent variable to depend on the value of one or more other independent variables. As an example, the three-way interaction between

V_{1}, V_{2}

and

V_{3}

is denoted

V_{1} . V_{2} . V_{3}

and describes a situation where the effect of one of these three variables is influenced by the value of the other two.

This routine takes a description of

M

, supplied as a text string containing a formula, and outputs a G22 handle to an internal data structure. This G22 handle can then be passed to g22ycf to produce a design matrix for use in analysis routines from other chapters, for example the regression routines of Chapter G02.

A more detailed description of what is meant by a G22 handle can be found in Section 2.1 in the G22 Chapter Introduction.

3.2 Syntax

In its most verbose form

M

can be described by one or more variable names,

V_{j}

, and the two operators,

+

and

.

. In order to allow a wide variety of models to be specified compactly this syntax is extended to six operators (

+

.

*

-

:

^

) and parentheses.

A formula describing the model is supplied to g22yaf via a character string which must obey the following rules:

1.Variables can be denoted by arbitrary names, as long as
1. (i)The names used are a subset of those supplied to g22ybf when describing $D$ .
2. (ii)The names do not contain any of the characters in $+ . * - :^() @$ .
2.The $.$ operator denotes an interaction between two or more variables or terms, with $V_{1} . V_{2} . V_{3}$ denoting the three-way interaction between $V_{1}$ , $V_{2}$ and $V_{3}$ .
3.A term in $M$ can contain one or more variable names, separated using the $.$ operator, i.e., a term can be either a main effect or an interaction term between two or more variables.
1. (i)If a variable appears in an interaction term more than once, all subsequent appearances, after the first, are ignored, therefore, $V_{1} . V_{2} . V_{1}$ is the same as $V_{1} . V_{2}$ .
2. (ii)The ordering of the variables in an interaction term is ignored when comparing terms, therefore, $V_{1} . V_{2}$ is the same as $V_{2} . V_{1}$ . This ordering may have an effect when the resulting G22 handle is passed to another routine, for example g22ycf.
3. (iii)Applying the $.$ operator to two terms appends one to the other, for example, if $T_{1} = V_{1} . V_{2}$ and $T_{2} = V_{3} . V_{4}$ , $T_{1} . T_{2} = V_{1} . V_{2} . V_{3} . V_{4}$ .
4.The $+$ operator allows additional terms to be included in $M$ , therefore, $T_{1} + T_{2}$ is a model that includes terms $T_{1}$ and $T_{2}$ .
1. (i)If a term is added to $M$ more than once, all subsequent appearances, after the first, are ignored, therefore, $T_{1} + T_{2} + T_{1}$ is the same as $T_{1} + T_{2}$ .
2. (ii)The ordering of the terms is ignored whilst parsing the formula, therefore, $T_{1} + T_{2}$ is the same as $T_{2} + T_{1}$ . This ordering may have an effect when the resulting G22 handle is passed to another routine, for example g22ycf.
3. (iii)Internally, the terms are reordered so that all main effects come first, followed by two-way interactions, then three-way interactions, etc. The ordering within each of these categories is preserved.
5.The $*$ operator can be used as a shorthand notation denoting the main effects and all interactions between the variables involved. Therefore, $T_{1} * T_{2}$ is equivalent to $T_{1} + T_{2} + T_{1} . T_{2}$ and $T_{1} * T_{2} * T_{3}$ is equivalent to $T_{1} + T_{2} + T_{3} + T_{1} . T_{2} + T_{1} . T_{3} + T_{2} . T_{3} + T_{1} . T_{2} . T_{3}$ .
6.The $-$ operator removes a term from $M$ , therefore, $T_{1} * T_{2} * T_{3} - T_{1} . T_{2} . T_{3}$ is equivalent to $T_{1} + T_{2} + T_{3} + T_{1} . T_{2} + T_{1} . T_{3} + T_{2} . T_{3}$ as the three-way interaction, $T_{1} . T_{2} . T_{3}$ , usually present due to $T_{1} * T_{2} * T_{3}$ has been removed.
7.The $:$ operator is a shorthand way of specifying a series of variables, with $V_{1} : V_{j}$ being equivalent to V1+ V2+ ⋯+ Vj .
1. (i)This operator can only be used if the variable names end in a numeric, therefore, $VAR2 : VAR4$ would be valid, but $FVAR : LVAR$ would not.
2. (ii)The root part of both variable names (i.e., the part before the trailing numeric, so $VAR$ in the valid example above) must be the same.
3. (iii)The trailing numeric parts of the two variable names must be in ascending order.
8.The $^$ operator is a shorthand notation for a series of $*$ operators. (T1+T2+T3) ^2 is equivalent to (T1+T2+T3) * (T1+T2+T3) which in turn is equivalent to T1+ T2+ T3+ T1. T2+ T1. T3+ T2. T3 .
1. (i)This notation is present primarily for use with the $:$ operator in examples of the form, $(V_{1} : V_{5})^3$ which specifies a model containing the main effects for variables $V_{1}$ to $V_{5}$ as well as all two- and three-way interactions.
2. (ii)Using the $^$ operator on a single term has no effect, therefore, $T_{2}^2$ is the same as $T_{2}$ .

3.2.1 Precedence

Each operator has an associated default precedence, but this can be overridden through the use of parentheses. The default precedence is:

1.The $:$ operator, with the resulting expression is treated as if it was surrounded by parentheses. Therefore, $V_{1} + V_{3} : V_{6} * V_{7}$ is equivalent to $V_{1} + (V_{3} + V_{4} + V_{5} + V_{6}) * V_{7}$ .
2.The $^$ operator, with the resulting expression is treated as if it was surrounded by parentheses. Therefore, $(T_{1} + T_{2} + T_{3})^2 . T_{4}$ is equivalent to $((T_{1} + T_{2} + T_{3})^2) . T_{4}$ , which is the equivalent to $T_{1} . T_{4} + T_{2} . T_{4} + T_{3} . T_{4} + T_{1} . T_{2} . T_{4} + T_{1} . T_{3} . T_{4} + T_{2} . T_{3} . T_{4}$ .
3.The $.$ operator, so $T_{1} * T_{2} . T_{3}$ is equivalent to $T_{1} * (T_{2} . T_{3})$ .
4.The $*$ operator.
1. (i)When using parentheses with the $*$ or $.$ operators the usual rules of multiplication apply, therefore, $(T_{1} + T_{3} . T_{4}) . (T_{5} + T_{7})$ is equivalent to $T_{1} . T_{5} + T_{1} . T_{7} + T_{3} . T_{4} . T_{5} + T_{3} . T_{4} . T_{7}$ and $(T_{1} + T_{3} . T_{4}) * (T_{5} + T_{7})$ is equivalent to $T_{1} + T_{5} + T_{7} + T_{3} . T_{4} + T_{1} . T_{5} + T_{1} . T_{7} + T_{3} . T_{4} . T_{5} + T_{3} . T_{4} . T_{7}$ .
2. (ii)Syntax of the following form is invalid: $T_{1} o (T_{2}) o T_{3}$ , where $o$ indicates an operator, unless one or more of those operators are $+$ and/or $-$ . Therefore, $T_{1} . (T_{2} + T_{3}) * T_{4}$ is invalid, whilst $T_{1} . (T_{2} + T_{3}) + T_{4}$ is valid.
5.The $+$ and $-$ operators have equal precedence.
1. (i)If the terms associated with a $-$ operator do not occur in the current expression they are ignored, therefore, $T_{1} + (T_{2} - T_{1})$ is the equivalent to $T_{1} + T_{2}$ ; the $(T_{2} - T_{1})$ part of the expression is calculated first and results in $T_{2}$ as the $T_{1}$ term does not exist in this particular sub-expression so cannot be removed.

3.2.2 Mean Effect / Intercept Term

A mean effect (or intercept term) can be explicitly added to a formula by specifying

1

and can be explicitly excluded from the formula by specifying

- 1

. For example,

1 + V_{1} + V_{2}

indicates a model with the main effects of two variables and a mean effect, whereas

V_{1} + V_{2} - 1

denotes the same model, but without the mean effect. The mean indicator can appear anywhere in the formula string as long as it is not contained within parentheses.

If the mean effect is not explicitly mentioned in the model formula, the model is assumed to include a mean effect.

3.3 Optional Parameters

g22yaf accepts a number of optional parameters described in Section 11. Usually these parameters are set via call to g22zmf, however when specifying a subject term in a mixed effects linear regression model it is often more convenient to supply the information along with the rest of the formula. Therefore, writeable optional parameters can be set via the formula argument. The delimiter

/

must be used between the main formula and the optional parameter. For example, supplying a formula of the form

V_{1} + V_{2} / SUBJECT = V_{3} . V_{4}

, would specify a model formula of

V_{1} + V_{2}

and set the optional parameter Subject to

V_{3} . V_{4}

4 References

None.

5 Arguments

1: $hform$ – Type (c_ptr) Input/Output: On entry: must be set to c_null_ptr, alternatively an existing G22 handle may be supplied in which case this routine will destroy the supplied G22 handle as if g22zaf had been called.

On exit: holds a G22 handle to the internal data structure containing a description of the model $M$ as specified in formula. You must not change the G22 handle other than through routines in Chapter G22.
2: $formula$ – Character(*) Input: On entry: a string containing the formula specifying $M$ . See Section 3 for details on the allowed model syntax.
3: $ifail$ – Integer Input/Output: On entry: ifail must be set to $0$ , $- 1$ or $1$ to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $- 1$ means that an error message is printed while a value of $1$ means that it is not.

If halting is not appropriate, the value $- 1$ or $1$ is recommended. If message printing is undesirable, then the value $1$ is recommended. Otherwise, the value $0$ is recommended. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit: $ifail = 0$ unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

- 1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 11$: On entry, hform is not c_null_ptr or a recognised G22 handle.

$ifail = 21$: The formula contained a mismatched parenthesis.
The position in the formula string of the error is $⟨ value ⟩$ .

$ifail = 22$: An operator was missing.
The position in the formula string of the error is $⟨ value ⟩$ .

$ifail = 23$: Invalid use of an operator.
The position in the formula string of the error is $⟨ value ⟩$ .

$ifail = 24$: Invalid specification for the power operator.
The position in the formula string of the error is $⟨ value ⟩$ .

$ifail = 25$: Invalid specification for the colon operator.
The position in the formula string of the error is $⟨ value ⟩$ .

$ifail = 26$: Invalid specification for the mean.
The position in the formula string of the error is $⟨ value ⟩$ .

$ifail = 27$: Invalid variable name.
The position in the formula string of the error is $⟨ value ⟩$ .

$ifail = 28$: Missing variable name.
The position in the formula string of the error is $⟨ value ⟩$ .

$ifail = 29$: After processing, the model contains no terms.

$ifail = 30$: An invalid contrast specifier has been supplied.
The position in the formula string of the error is $⟨ value ⟩$ .

$ifail = 31$: A term contained a repeated variable with a different contrast specifier.

$ifail = 41$: On entry, an invalid $option$ was supplied in formula.

$ifail = 42$: On entry, an $option$ was supplied in formula, but the expected delimiter ‘ $=$ ’ was not found.

$ifail = 43$: On entry, an $option$ was supplied in formula, but the supplied $optval$ was invalid.

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

Not applicable.

8 Parallelism and Performance

g22yaf is not threaded in any implementation.

9 Further Comments

None.

10 Example

This example reads in and parses a formula specifying a model,

M

, and displays the processed formula. A data matrix,

D

, is then read in and a design matrix constructed from

D

and

M

using g22ycf.

The design matrix includes an explicit term for the mean effect.

See also the examples for g22ybf, g22ycf and g22ydf.

11 Optional Parameters

As well as the optional parameters common to all G22 handles described in g22zmf and g22znf, a number of additional optional parameters can be specified for a G22 handle holding the description of a model, as returned by g22yaf in hform.

Each writeable optional parameter has an associated default value; to set any of them to a non-default value, use g22zmf. The value of any optional parameter can be queried using g22znf.

The remainder of this section can be skipped if you wish to use the default values for all optional parameters.

The following is a list of the optional parameters available. A full description of each optional parameter is provided in Section 11.1.

Contrast
Explicit Mean
Formula
Storage Order
Subject

All routines that make use of the G22 handle returned by g22yaf combine it with a description of a data matrix,

D

, to construct a design matrix,

X

11.1 Description of the Optional Parameters

For each option, we give a summary line, a description of the optional parameter and details of constraints.

The summary line contains:

a parameter value, where the letters $a$ , $i$ and $r$ denote options that take character, integer and real values respectively;
the default value.

Keywords and character values are case and white space insensitive.

Contrast

a

Default

= FIRST

This parameter controls the default contrasts used for the categorical independent variables appearing in the model. Six types of contrasts and dummy variables are available:

$FIRST$: Treatment contrasts relative to the first level of the variable will be used.
$LAST$: Treatment contrasts relative to the last level of the variable will be used.
$SUM FIRST$: Sum contrasts relative to the first level of the variable will be used.
$SUM LAST$: Sum contrasts relative to the last level of the variable will be used.
$HELMERT$: Helmert contrasts will be used.
$POLYNOMIAL$: Polynomial contrasts will be used.
$DUMMY$: Dummy variables will be used rather than a contrast.

See g22ycf for more information on contrasts, their effect on the design matrix and how they are constructed.

This parameter may have an instance identifier associated with it (see g22zmf and g22znf). The instance identifier must be the name of one of the variables appearing in the model supplied in formula when the G22 handle was created. For example, CONTRAST : VAR1 = HELMERT would set Helmert contrasts for the variable named VAR1.

If no instance identifier is specified, the default contrast for all categorical variables in the model is changed, otherwise only the default contrast for the named variable is changed.

In some situations it might be necessary for a variable to use a different contrast, depending on where it appears in the model formula. In order to allow contrasts to be specified on a term by term basis the

@

operator can be used in the model formula. The syntax for this operator is

V_{j} @ c

, where

c

is one of: F, L, SF, SL, H, P or D, corresponding to treatment contrasts relative to the first and last levels, sum contrasts relative to the first and last levels, Helmert contrasts, polynomial contrasts or dummy variables respectively.

If the contrast has not been explicitly specified via the

@

operator, the value obtained from the optional parameter Contrast is used.

For example, setting formula to VAR1 + VAR1@H.VAR2@P + VAR2@H.VAR3, specifies that the variable named VAR1 should use the default contrasts in the first term and Helmert contrasts in the second term. The variable named VAR2 should use polynomial contrasts in the second term and Helmert contrasts in the third term. The variable named VAR3 should use the default contrasts in the third term.

Constraint:

Contrast = FIRST

LAST

SUM FIRST

SUM LAST

HELMERT

POLYNOMIAL

DUMMY

Explicit Mean

a

Default

= NO

Explicit Mean = YES

, any mean effect included in the model will be explicitly added to the design matrix,

X

, as a column of

1

Explicit Mean = NO

, it is assumed that the routine to which

X

will be passed treats the mean effect as a special case, see mean in g02daf for example.

Constraint:

Explicit Mean = YES

NO

Formula

a

Read Only

This parameter returns a verbose version of the model formula specified in formula, expanded and simplified to only contain variable names, the operators

+

and

.

and any contrast identifiers present.

Storage Order

a

Default

= OBSVAR

This optional parameter controls how the design matrix,

X

, should be stored in its output array and only has an effect if the design matrix is being constructed using g22ycf.

Storage Order = OBSVAR

X_{i j}

, the value for the

j

th variable of the

i

th observation of the design matrix is stored in

x (i, j)

Storage Order = VAROBS

X_{i j}

, the value for the

j

th variable of the

i

th observation of the design matrix is stored in

x (j, i)

Where x is the output parameter of the same name in g22ycf.

Constraint:

Storage Order = OBSVAR

VAROBS

Subject

a

This parameter gives the subject terms associated with the formula in a linear mixed effects model.

The supplied value must consist of a single term, representing either a single independent variable, or a single interaction term between two or more independent variables. All variables in the subject term must not also appear in the model formula.

NAG Library Manual, Mark 27.1

Interfaces: FL CL CPP AD

NAG FL Interface Introduction

G22 (Blgm) Chapter Contents

G22 (Blgm) Chapter Introduction

g22ya: FL CL CPP AD