Integer, Intent (In)	::	indw, isigma, n, m, ldx, maxit, nitmon
Integer, Intent (Inout)	::	ifail
Integer, Intent (Out)	::	k, nit
Real (Kind=nag_wp), External	::	chi, psi
Real (Kind=nag_wp), Intent (In)	::	psip0, beta, tol, eps
Real (Kind=nag_wp), Intent (Inout)	::	x(ldx,m), y(n), wgt(n), theta(m), sigma
Real (Kind=nag_wp), Intent (Out)	::	rs(n), wk((m+4)*n)

C Header Interface

#include <nag.h>

void

g02hdf_ (
double (NAG_CALL *chi)(const double *t),
double (NAG_CALL *psi)(const double *t),
const double *psip0, const double *beta, const Integer *indw, const Integer *isigma, const Integer *n, const Integer *m, double x[], const Integer *ldx, double y[], double wgt[], double theta[], Integer *k, double *sigma, double rs[], const double *tol, const double *eps, const Integer *maxit, const Integer *nitmon, Integer *nit, double wk[], Integer *ifail)

The routine may be called by the names g02hdf or nagf_correg_robustm_user.

3 Description

For the linear regression model

y = X θ + ε,

where	$y$ is a vector of length $n$ of the dependent variable,
	$X$ is an $n \times m$ matrix of independent variables of column rank $k$ ,
	$θ$ is a vector of length $m$ of unknown parameters,
and	$ε$ is a vector of length $n$ of unknown errors with var $(ε_{i}) = σ^{2}$ ,

g02hdf calculates the M-estimates given by the solution,

\hat{θ}

, to the equation

\sum_{i = 1}^{n} ψ (r_{i} / (σ w_{i})) w_{i} x_{i j} = 0, j = 1, 2, \dots, m,

(1)

where	$r_{i}$ is the $i$ th residual, i.e., the $i$ th element of the vector $r = y - X \hat{θ}$ ,
	$ψ$ is a suitable weight function,
	$w_{i}$ are suitable weights such as those that can be calculated by using output from g02hbf,
and	$σ$ may be estimated at each iteration by the median absolute deviation of the residuals $\hat{σ} = {med}_{i} [\| r_{i} \|] / β_{1}$

or as the solution to

\sum_{i = 1}^{n} χ (r_{i} / (\hat{σ} w_{i})) w_{i}^{2} = (n - k) β_{2}

for a suitable weight function

χ

, where

β_{1}

and

β_{2}

are constants, chosen so that the estimator of

σ

is asymptotically unbiased if the errors,

ε_{i}

, have a Normal distribution. Alternatively

σ

may be held at a constant value.

The above describes the Schweppe type regression. If the

w_{i}

are assumed to equal

1

for all

i

, then Huber type regression is obtained. A third type, due to Mallows, replaces (1) by

\sum_{i = 1}^{n} ψ (r_{i} / σ) w_{i} x_{i j} = 0, j = 1, 2, \dots, m .

This may be obtained by use of the transformations

\begin{array}{l} w_{i}^{*} & \leftarrow \sqrt{w_{i}} \\ y_{i}^{*} & \leftarrow y_{i} \sqrt{w_{i}} \\ x_{i j}^{*} & \leftarrow x_{i j} \sqrt{w_{i}}, j = 1, 2, \dots, m \end{array}

(see Marazzi (1987)).

The calculation of the estimates of

θ

can be formulated as an iterative weighted least squares problem with a diagonal weight matrix

G

given by

G_{i i} = {\begin{array}{cl} \frac{ψ (r_{i} / (σ w_{i}))}{(r_{i} / (σ w_{i}))}, & r_{i} \neq 0 \\ ψ^{'} (0), & r_{i} = 0 . \end{array} .

The value of

θ

at each iteration is given by the weighted least squares regression of

y

X

. This is carried out by first transforming the

y

and

X

\begin{array}{l} {\tilde{y}}_{i} & = y_{i} \sqrt{G_{i i}} \\ {\tilde{x}}_{i j} & = x_{i j} \sqrt{G_{i i}}, j = 1, 2, \dots, m \end{array}

and then using f04jgf . If

X

is of full column rank then an orthogonal-triangular (

Q R

) decomposition is used; if not, a singular value decomposition is used.

Observations with zero or negative weights are not included in the solution.

Note: there is no explicit provision in the routine for a constant term in the regression model. However, the addition of a dummy variable whose value is

1.0

for all observations will produce a value of

\hat{θ}

corresponding to the usual constant term.

g02hdf is based on routines in ROBETH, see Marazzi (1987).

4 References

Hampel F R, Ronchetti E M, Rousseeuw P J and Stahel W A (1986) Robust Statistics. The Approach Based on Influence Functions Wiley

Huber P J (1981) Robust Statistics Wiley

Marazzi A (1987) Subroutines for robust and bounded influence regression in ROBETH Cah. Rech. Doc. IUMSP, No. 3 ROB 2 Institut Universitaire de Médecine Sociale et Préventive, Lausanne

5 Arguments

1: $chi$ – real (Kind=nag_wp) Function, supplied by the user. External Procedure

isigma > 0

, chi must return the value of the weight function

χ

for a given value of its argument. The value of

χ

must be non-negative.

The specification of chi is:

Fortran Interface

Function chi (

Real (Kind=nag_wp)	::	chi
Real (Kind=nag_wp), Intent (In)	::	t

C Header Interface

double

chi (const double *t)

1: $t$ – Real (Kind=nag_wp) Input: On entry: the argument for which chi must be evaluated.

chi must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which g02hdf is called. Arguments denoted as Input must not be changed by this procedure.

Note: chi should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by g02hdf. If your code inadvertently does return any NaNs or infinities, g02hdf is likely to produce unexpected results.

isigma \leq 0

, the actual argument chi may be the dummy routine g02hdz. (g02hdz is included in the NAG Library.)

2: $psi$ – real (Kind=nag_wp) Function, supplied by the user. External Procedure

psi must return the value of the weight function

ψ

for a given value of its argument.

The specification of psi is:

Fortran Interface

Function psi (

Real (Kind=nag_wp)	::	psi
Real (Kind=nag_wp), Intent (In)	::	t

C Header Interface

double

psi (const double *t)

1: $t$ – Real (Kind=nag_wp) Input: On entry: the argument for which psi must be evaluated.

psi must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which g02hdf is called. Arguments denoted as Input must not be changed by this procedure.

Note: psi should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by g02hdf. If your code inadvertently does return any NaNs or infinities, g02hdf is likely to produce unexpected results.

3: $psip0$ – Real (Kind=nag_wp) Input

On entry: the value of

ψ^{'} (0)

4: $beta$ – Real (Kind=nag_wp) Input

On entry: if

isigma < 0

, beta must specify the value of

β_{1}

For Huber and Schweppe type regressions,

β_{1}

is the

75

th percentile of the standard Normal distribution (see g01faf). For Mallows type regression

β_{1}

is the solution to

\frac{1}{n} \sum_{i = 1}^{n} Φ (β_{1} / \sqrt{w_{i}}) = 0.75,

where

Φ

is the standard Normal cumulative distribution function (see s15abf).

isigma > 0

, beta must specify the value of

β_{2}

\begin{array}{l} β_{2} = & \int_{- \infty}^{\infty} χ (z) ϕ (z) d z, & in the Huber case; \\ β_{2} = & \frac{1}{n} \sum_{i = 1}^{n} w_{i} \int_{- \infty}^{\infty} χ (z) ϕ (z) d z, & in the Mallows case; \\ β_{2} = & \frac{1}{n} \sum_{i = 1}^{n} w_{i}^{2} \int_{- \infty}^{\infty} χ (z / w_{i}) ϕ (z) d z, & in the Schweppe case; \end{array}

where

ϕ

is the standard normal density, i.e.,

\frac{1}{\sqrt{2 π}} \exp (- \frac{1}{2} x^{2})

isigma = 0

, beta is not referenced.

Constraint: if

isigma \neq 0

beta > 0.0

5: $indw$ – Integer Input

On entry: determines the type of regression to be performed.

$indw = 0$: Huber type regression.
$indw < 0$: Mallows type regression.
$indw > 0$: Schweppe type regression.

6: $isigma$ – Integer Input

On entry: determines how

σ

is to be estimated.

$isigma = 0$: $σ$ is held constant at its initial value.
$isigma < 0$: $σ$ is estimated by median absolute deviation of residuals.
$isigma > 0$: $σ$ is estimated using the $χ$ function.

7: $n$ – Integer Input

On entry:

n

, the number of observations.

Constraint:

n > 1

8: $m$ – Integer Input

On entry:

m

, the number of independent variables.

Constraint:

1 \leq m < n

9: $x (ldx, m)$ – Real (Kind=nag_wp) array Input/Output

On entry: the values of the

X

matrix, i.e., the independent variables.

x (i, j)

must contain the

i j

th element of

x

, for

i = 1, 2, \dots, n

and

j = 1, 2, \dots, m

indw < 0

, during calculations the elements of x will be transformed as described in Section 3. Before exit the inverse transformation will be applied. As a result there may be slight differences between the input x and the output x.

On exit: unchanged, except as described above.

10: $ldx$ – Integer Input

On entry: the first dimension of the array x as declared in the (sub)program from which g02hdf is called.

Constraint:

ldx \geq n

11: $y (n)$ – Real (Kind=nag_wp) array Input/Output

On entry: the data values of the dependent variable.

y (i)

must contain the value of

y

for the

i

th observation, for

i = 1, 2, \dots, n

indw < 0

, during calculations the elements of y will be transformed as described in Section 3. Before exit the inverse transformation will be applied. As a result there may be slight differences between the input y and the output y.

On exit: unchanged, except as described above.

12: $wgt (n)$ – Real (Kind=nag_wp) array Input/Output

On entry: the weight for the

i

th observation, for

i = 1, 2, \dots, n

indw < 0

, during calculations elements of wgt will be transformed as described in Section 3. Before exit the inverse transformation will be applied. As a result there may be slight differences between the input wgt and the output wgt.

wgt (i) \leq 0

, the

i

th observation is not included in the analysis.

indw = 0

, wgt is not referenced.

On exit: unchanged, except as described above.

13: $theta (m)$ – Real (Kind=nag_wp) array Input/Output

On entry: starting values of the parameter vector

θ

. These may be obtained from least squares regression. Alternatively if

isigma < 0

and

sigma = 1

or if

isigma > 0

and sigma approximately equals the standard deviation of the dependent variable,

y

, then

theta (i) = 0.0

, for

i = 1, 2, \dots, m

may provide reasonable starting values.

On exit: the M-estimate of

θ_{i}

, for

i = 1, 2, \dots, m

14: $k$ – Integer Output

On exit: the column rank of the matrix

X

15: $sigma$ – Real (Kind=nag_wp) Input/Output

On entry: a starting value for the estimation of

σ

. sigma should be approximately the standard deviation of the residuals from the model evaluated at the value of

θ

given by theta on entry.

Constraint:

sigma > 0.0

On exit: the final estimate of

σ

isigma \neq 0

or the value assigned on entry if

isigma = 0

16: $rs (n)$ – Real (Kind=nag_wp) array Output

On exit: the residuals from the model evaluated at final value of theta, i.e., rs contains the vector

(y - X \hat{θ})

17: $tol$ – Real (Kind=nag_wp) Input

On entry: the relative precision for the final estimates. Convergence is assumed when both the relative change in the value of sigma and the relative change in the value of each element of theta are less than tol.

It is advisable for tol to be greater than

100 \times machine precision

Constraint:

tol > 0.0

18: $eps$ – Real (Kind=nag_wp) Input

On entry: a relative tolerance to be used to determine the rank of

X

. See f04jgf for further details.

eps < machine precision

eps > 1.0

, machine precision will be used in place of tol.

A reasonable value for eps is

5.0 \times 10^{−6}

where this value is possible.

19: $maxit$ – Integer Input

On entry: the maximum number of iterations that should be used during the estimation.

A value of

maxit = 50

should be adequate for most uses.

Constraint:

maxit > 0

20: $nitmon$ – Integer Input

On entry: determines the amount of information that is printed on each iteration.

$nitmon \leq 0$: No information is printed.
$nitmon > 0$: On the first and every nitmon iterations the values of sigma, theta and the change in theta during the iteration are printed.

When printing occurs the output is directed to the current advisory message unit (see x04abf).

21: $nit$ – Integer Output

On exit: the number of iterations that were used during the estimation.

22: $wk ((m + 4) \times n)$ – Real (Kind=nag_wp) array Workspace

23: $ifail$ – Integer Input/Output

On entry: ifail must be set to

0

−1

1

to set behaviour on detection of an error; these values have no effect when no error is detected.

A value of

0

causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of

−1

means that an error message is printed while a value of

1

means that it is not.

If halting is not appropriate, the value

−1

1

is recommended. If message printing is undesirable, then the value

1

is recommended. Otherwise, the value

−1

is recommended since useful values can be provided in some output arguments even when

ifail \neq 0

on exit. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit:

ifail = 0

unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

−1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

Note: in some cases g02hdf may return useful information.

$ifail = 1$: On entry, $m = ⟨ value ⟩$ .
Constraint: $m \geq 1$ .

On entry, $n = ⟨ value ⟩$ .
Constraint: $n \geq 2$ .

On entry, $n = ⟨ value ⟩$ and $ldx = ⟨ value ⟩$ .
Constraint: $ldx \geq n$ .

On entry, $n = ⟨ value ⟩$ and $m = ⟨ value ⟩$ .
Constraint: $n > m$ .

$ifail = 2$: On entry, $beta = ⟨ value ⟩$ .
Constraint: $beta > 0.0$ .

On entry, $sigma = ⟨ value ⟩$ .
Constraint: $sigma > 0.0$ .

$ifail = 3$: On entry, $maxit = ⟨ value ⟩$ .
Constraint: $maxit > 0$ .

On entry, $tol = ⟨ value ⟩$ .
Constraint: $tol > 0.0$ .

$ifail = 4$: Value given by chi function $< 0$ : $chi (⟨ value ⟩) = ⟨ value ⟩$ .
The value of chi must be non-negative.

$ifail = 5$: Estimated value of sigma is zero.

$ifail = 6$: Iterations to solve the weighted least squares equations failed to converge.

$ifail = 7$: The weighted least squares equations are not of full rank. This may be due to the $X$ matrix not being of full rank, in which case the results will be valid. It may also occur if some of the $G_{i i}$ values become very small or zero, see Section 9. The rank of the equations is given by k. If the matrix just fails the test for nonsingularity then the result $ifail = 7$ and $k = m$ is possible (see f04jgf).

$ifail = 8$: The routine has failed to converge in maxit iterations.

$ifail = 9$: Having removed cases with zero weight, the value of $n - k \leq 0$ , i.e., no degree of freedom for error. This error will only occur if $isigma > 0$ .

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The accuracy of the results is controlled by tol. For the accuracy of the weighted least squares see f04jgf.

8 Parallelism and Performance

Background information to multithreading can be found in the Multithreading documentation.

g02hdf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.

g02hdf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

In cases when

isigma \neq 0

it is important for the value of sigma to be of a reasonable magnitude. Too small a value may cause too many of the winsorized residuals, i.e.,

ψ (r_{i} / σ)

, to be zero, which will lead to convergence problems and may trigger the

ifail = 7

error.

By suitable choice of the functions chi and psi this routine may be used for other applications of iterative weighted least squares.

For the variance-covariance matrix of

θ

see g02hff.

10 Example

Having input

X

Y

and the weights, a Schweppe type regression is performed using Huber's

ψ

function. The subroutine BETCAL calculates the appropriate value of

β_{2}

g02hd: FL CL CPP AD PY MB

NAG FL Interfaceg02hdf (robustm_​user)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG FL Interface
g02hdf (robustm_user)