g05yqc generates a quasi-random sequence from a Normal (Gaussian) distribution. Values are generated for a subset of dimensions. It must be preceded by a call to one of the initialization functions g05ylc or g05ync.

2 Specification

#include <nag.h>

void	g05yqc (Nag_OrderType order, Integer n, const double xmean[], const double std[], Integer fdim, Integer ldim, double quas[], Integer pdquas, Integer iref[], NagError *fail)

The function may be called by the names: g05yqc or nag_rand_quasi_normal_bydim.

3 Description

g05yqc generates a quasi-random sequence, for a specified subset of dimensions, from a Normal distribution by first generating a uniform quasi-random sequence, for the specified subset of dimensions, which is then transformed into a Normal sequence using the inverse of the Normal CDF. The type of uniform sequence used depends on the initialization function called and can include the low-discrepancy sequences proposed by Sobol, Faure or Niederreiter. If the initialization function g05ync was used then the underlying uniform sequence is first scrambled prior to being transformed (see Section 3 in g05ync for details).

4 References

Bratley P and Fox B L (1988) Algorithm 659: implementing Sobol's quasirandom sequence generator ACM Trans. Math. Software 14(1) 88–100

Fox B L (1986) Algorithm 647: implementation and relative efficiency of quasirandom sequence generators ACM Trans. Math. Software 12(4) 362–376

Wichura (1988) Algorithm AS 241: the percentage points of the Normal distribution Appl. Statist. 37 477–484

5 Arguments

Note: the following variables are used in the parameter descriptions:

$idim = idim$ , the number of dimensions required, see g05ylc or g05ync
$liref = liref$ , the length of iref as supplied to the initialization function g05ylc or g05ync

1: $order$ – Nag_OrderType Input

On entry: the order argument specifies the two-dimensional storage scheme being used, i.e., row-major ordering or column-major ordering. C language defined storage is specified by

order = Nag_RowMajor

. See Section 3.1.3 in the Introduction to the NAG Library CL Interface for a more detailed explanation of the use of this argument.

Constraint:

order = Nag_RowMajor

Nag_ColMajor

2: $n$ – Integer Input

On entry: the number of quasi-random numbers required.

Constraint:

n \geq 0

and

n + previous number of generated values \leq 2^{31} - 1

3: $xmean [\dim]$ – const double Input

On entry: specifies, for each dimension, the mean of the Normal distribution.

4: $std [\dim]$ – const double Input

On entry: specifies, for each dimension, the standard deviation of the Normal distribution.

Constraint:

std [i - 1] \geq 0.0

, for

i = 1, 2, \dots, idim

5: $fdim$ – Integer Input

On entry: the first dimension to return.

Constraint:

1 \leq fdim \leq ldim

6: $ldim$ – Integer Input

On entry: the last dimension to return.

Constraint:

ldim \leq idim

7: $quas [\dim]$ – double Output

Note: where

QUAS (i, k)

appears in this document, it refers to the array element

$quas [(k - 1) \times pdquas + i - 1]$ when $order = Nag_ColMajor$ ;
$quas [(i - 1) \times pdquas + k - 1]$ when $order = Nag_RowMajor$ .

On exit: contains the n quasi-random numbers for the required dimensions of a sequence with idim dimensions.

For

i = 1, 2, \dots, n

j = fdim, fdim + 1, \dots, ldim

and

k = j - fdim + 1

, the

i

th value for the

j

th dimension is held in

$QUAS (i, k)$ , if $order = Nag_ColMajor$ ,
$QUAS (k, i)$ , if $order = Nag_RowMajor$ .

8: $pdquas$ – Integer Input

On entry: the stride separating row or column elements (depending on the value of order) in the array quas.

Constraints:

if $order = Nag_ColMajor$ , $pdquas \geq n$ ;
if $order = Nag_RowMajor$ , $pdquas \geq ldim - fdim + 1$ .

9: $iref [\dim]$ – Integer Communication Array

Note: the dimension, dim, of the array iref must be at least

liref

On entry: contains information on the current state of the sequence.

On exit: contains updated information on the state of the sequence.

10: $fail$ – NagError * Input/Output

The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).

6 Error Indicators and Warnings

NE_ALLOC_FAIL: Dynamic memory allocation failed.
See Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.
NE_ARRAY_SIZE: On entry, $pdquas = ⟨ value ⟩$ and $ldim - fdim + 1 = ⟨ value ⟩$ .
Constraint: $pdquas \geq ldim - fdim + 1$ .

On entry, $pdquas = ⟨ value ⟩$ and $n = ⟨ value ⟩$ .
Constraint: $pdquas \geq n$ .
NE_BAD_PARAM: On entry, argument $⟨ value ⟩$ had an illegal value.
NE_INITIALIZATION: g05yqc can not be used with the Faure generator.

On entry, iref has either not been initialized or has been corrupted.

On entry, iref is too short to use with g05yqc.

On entry, the specified dimensions are out of sync.
A different number of values have been generated from at least one of the specified dimensions.
NE_INT: On entry, $ldim = ⟨ value ⟩$ and $idim = ⟨ value ⟩$ .
Constraint: $ldim \leq idim$

On entry, $n = ⟨ value ⟩$ .
Constraint: $n \geq 0$ .
NE_INT_2: On entry, $fdim = ⟨ value ⟩$ and $ldim = ⟨ value ⟩$ .
Constraint: $1 \leq fdim \leq ldim$
NE_INTERNAL_ERROR: An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 7.5 in the Introduction to the NAG Library CL Interface for further information.
NE_NO_LICENCE: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library CL Interface for further information.
NE_REAL_ARRAY: On entry, $i = ⟨ value ⟩$ and $std [i - 1] = ⟨ value ⟩$ .
Constraint: $std [i - 1] \geq 0.0$ .
NE_TOO_MANY_CALLS: On entry, value of n would result in too many calls to the generator: $n = ⟨ value ⟩$ , generator has previously been called $⟨ value ⟩$ times.

7 Accuracy

Not applicable.

8 Parallelism and Performance

Background information to multithreading can be found in the Multithreading documentation.

g05yqc is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.

g05yqc makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

None.

10 Example

This example generates a sequence of

10

values from a Normal distribution with mean

3.1

and standard deviation

2.1

, from dimensions

3

7

of an

8

dimension Sobol sequence.

g05yq: FL CL CPP AD PY MB

NAG CL Interfaceg05yqc (quasi_​normal_​bydim)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG CL Interface
g05yqc (quasi_normal_bydim)