Integer, Intent (In)	::	ln, n(ln), ll, l(ll), lm, m(lm), lk, k(lk)
Integer, Intent (Inout)	::	ifail
Integer, Intent (Out)	::	ivalid(*)
Real (Kind=nag_wp), Intent (Out)	::	plek(), pgtk(), peqk(*)

C Header Interface

#include <nag.h>

void	g01slf_ (const Integer ln, const Integer n[], const Integer ll, const Integer l[], const Integer lm, const Integer m[], const Integer lk, const Integer k[], double plek[], double pgtk[], double peqk[], Integer ivalid[], Integer *ifail)

The routine may be called by the names g01slf or nagf_stat_prob_hypergeom_vector.

3 Description

Let

X = {X_{i} : i = 1, 2, \dots, r}

denote a vector of random variables having a hypergeometric distribution with parameters

n_{i}

l_{i}

and

m_{i}

. Then

Prob {X_{i} = k_{i}} = \frac{(\begin{array}{l} m_{i} \\ k_{i} \end{array}) (\begin{array}{l} n_{i} - m_{i} \\ l_{i} - k_{i} \end{array})}{(\begin{array}{l} n_{i} \\ l_{i} \end{array})},

where

\max (0, l_{i} + m_{i} - n_{i}) \leq k_{i} \leq \min (l_{i}, m_{i})

0 \leq l_{i} \leq n_{i}

and

0 \leq m_{i} \leq n_{i}

The hypergeometric distribution may arise if in a population of size

n_{i}

a number

m_{i}

are marked. From this population a sample of size

l_{i}

is drawn and of these

k_{i}

are observed to be marked.

The mean of the distribution

= \frac{l_{i} m_{i}}{n_{i}}

, and the variance

= \frac{l_{i} m_{i} (n_{i} - l_{i}) (n_{i} - m_{i})}{{n_{i}}^{2} (n_{i} - 1)}

g01slf computes for given

n_{i}

l_{i}

m_{i}

and

k_{i}

the probabilities:

Prob {X_{i} \leq k_{i}}

Prob {X_{i} > k_{i}}

and

Prob {X_{i} = k_{i}}

using an algorithm similar to that described in Knüsel (1986) for the Poisson distribution.

The input arrays to this routine are designed to allow maximum flexibility in the supply of vector arguments by re-using elements of any arrays that are shorter than the total number of evaluations required. See Section 2.6 in the G01 Chapter Introduction for further information.

4 References

Knüsel L (1986) Computation of the chi-square and Poisson distribution SIAM J. Sci. Statist. Comput. 7 1022–1036

5 Arguments

1: $\ln$ – Integer Input

On entry: the length of the array n.

Constraint:

\ln > 0

2: $n (\ln)$ – Integer array Input

On entry:

n_{i}

, the parameter of the hypergeometric distribution with

n_{i} = n (j)

j = ((i - 1) mod \ln) + 1

, for

i = 1, 2, \dots, \max (\ln, ll, lm, lk)

Constraint:

n (j) \geq 0

, for

j = 1, 2, \dots, \ln

3: $ll$ – Integer Input

On entry: the length of the array l.

Constraint:

ll > 0

4: $l (ll)$ – Integer array Input

On entry:

l_{i}

, the parameter of the hypergeometric distribution with

l_{i} = l (j)

j = ((i - 1) mod ll) + 1

Constraint:

0 \leq l_{i} \leq n_{i}

5: $lm$ – Integer Input

On entry: the length of the array m.

Constraint:

lm > 0

6: $m (lm)$ – Integer array Input

On entry:

m_{i}

, the parameter of the hypergeometric distribution with

m_{i} = m (j)

j = ((i - 1) mod lm) + 1

Constraint:

0 \leq m_{i} \leq n_{i}

7: $lk$ – Integer Input

On entry: the length of the array k.

Constraint:

lk > 0

8: $k (lk)$ – Integer array Input

On entry:

k_{i}

, the integer which defines the required probabilities with

k_{i} = k (j)

j = ((i - 1) mod lk) + 1

Constraint:

\max (0, l_{i} + m_{i} - n_{i}) \leq k_{i} \leq \min (l_{i}, m_{i})

9: $plek (*)$ – Real (Kind=nag_wp) array Output

Note: the dimension of the array plek must be at least

\max (\ln, ll, lm, lk)

On exit:

Prob {X_{i} \leq k_{i}}

, the lower tail probabilities.

10: $pgtk (*)$ – Real (Kind=nag_wp) array Output

Note: the dimension of the array pgtk must be at least

\max (\ln, ll, lm, lk)

On exit:

Prob {X_{i} > k_{i}}

, the upper tail probabilities.

11: $peqk (*)$ – Real (Kind=nag_wp) array Output

Note: the dimension of the array peqk must be at least

\max (\ln, ll, lm, lk)

On exit:

Prob {X_{i} = k_{i}}

, the point probabilities.

12: $ivalid (*)$ – Integer array Output

Note: the dimension of the array ivalid must be at least

\max (\ln, ll, lm, lk)

On exit:

ivalid (i)

indicates any errors with the input arguments, with

$ivalid (i) = 0$: No error.
$ivalid (i) = 1$: On entry, $n_{i} < 0$ .
$ivalid (i) = 2$: On entry, $l_{i} < 0$ , or, $l_{i} > n_{i}$ .
$ivalid (i) = 3$: On entry, $m_{i} < 0$ , or, $m_{i} > n_{i}$ .
$ivalid (i) = 4$: On entry, $k_{i} < 0$ , or, $k_{i} > l_{i}$ , or, $k_{i} > m_{i}$ , or, $k_{i} < l_{i} + m_{i} - n_{i}$ .
$ivalid (i) = 5$: On entry, $n_{i}$ is too large to be represented exactly as a real number.
$ivalid (i) = 6$: On entry, the variance (see Section 3) exceeds $10^{6}$ .

13: $ifail$ – Integer Input/Output

On entry: ifail must be set to

0

−1

1

to set behaviour on detection of an error; these values have no effect when no error is detected.

A value of

0

causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of

−1

means that an error message is printed while a value of

1

means that it is not.

If halting is not appropriate, the value

−1

1

is recommended. If message printing is undesirable, then the value

1

is recommended. Otherwise, the value

0

is recommended. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit:

ifail = 0

unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

−1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 1$: On entry, at least one value of n, l, m or k was invalid, or the variance was too large.
Check ivalid for more information.

$ifail = 2$: On entry, $array size = ⟨ value ⟩$ .
Constraint: $\ln > 0$ .

$ifail = 3$: On entry, $array size = ⟨ value ⟩$ .
Constraint: $ll > 0$ .

$ifail = 4$: On entry, $array size = ⟨ value ⟩$ .
Constraint: $lm > 0$ .

$ifail = 5$: On entry, $array size = ⟨ value ⟩$ .
Constraint: $lk > 0$ .

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

Results are correct to a relative accuracy of at least

10^{−6}

on machines with a precision of

9

or more decimal digits (provided that the results do not underflow to zero).

8 Parallelism and Performance

Background information to multithreading can be found in the Multithreading documentation.

g01slf is not threaded in any implementation.

9 Further Comments

The time taken by g01slf to calculate each probability depends on the variance (see Section 3) and on

k_{i}

. For given variance, the time is greatest when

k_{i} \approx l_{i} m_{i} / n_{i}

(

=

the mean), and is then approximately proportional to the square-root of the variance.

10 Example

This example reads a vector of values for

n

l

m

and

k

, and prints the corresponding probabilities.

g01sl: FL CL CPP AD PY MB

NAG FL Interfaceg01slf (prob_​hypergeom_​vector)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG FL Interface
g01slf (prob_hypergeom_vector)