NAG FL Interfaced01daf (dim2_​fin)

▸▿ Contents

Settings help

FL Name Style:

FL Specification Language:

1Purpose

d01daf attempts to evaluate a double integral to a specified absolute accuracy by repeated applications of the method described by Patterson (1968) and Patterson (1969).

2Specification

Fortran Interface
 Subroutine d01daf ( ya, yb, phi1, phi2, f, ans, npts,
 Integer, Intent (Inout) :: ifail Integer, Intent (Out) :: npts Real (Kind=nag_wp), External :: phi1, phi2, f Real (Kind=nag_wp), Intent (In) :: ya, yb, absacc Real (Kind=nag_wp), Intent (Out) :: ans
#include <nag.h>
 void d01daf_ (const double *ya, const double *yb, double (NAG_CALL *phi1)(const double *y),double (NAG_CALL *phi2)(const double *y),double (NAG_CALL *f)(const double *x, const double *y),const double *absacc, double *ans, Integer *npts, Integer *ifail)
The routine may be called by the names d01daf or nagf_quad_dim2_fin.

3Description

d01daf attempts to evaluate a definite integral of the form
 $I= ∫ab ∫ ϕ1(y) ϕ2(y) f(x,y) dx dy$
where $a$ and $b$ are constants and ${\varphi }_{1}\left(y\right)$ and ${\varphi }_{2}\left(y\right)$ are functions of the variable $y$.
The integral is evaluated by expressing it as
 $I=∫abF(y)dy, where F(y)= ∫ ϕ1(y) ϕ2(y) f(x,y)dx.$
Both the outer integral $I$ and the inner integrals $F\left(y\right)$ are evaluated by the method, described by Patterson (1968) and Patterson (1969), of the optimum addition of points to Gauss quadrature formulae.
This method uses a family of interlacing common point formulae. Beginning with the $3$-point Gauss rule, formulae using $7$, $15$, $31$, $63$, $127$ and finally $255$ points are derived. Each new formula contains all the points of the earlier formulae so that no function evaluations are wasted. Each integral is evaluated by applying these formulae successively until two results are obtained which differ by less than the specified absolute accuracy.

4References

Patterson T N L (1968) On some Gauss and Lobatto based integration formulae Math. Comput. 22 877–881
Patterson T N L (1969) The optimum addition of points to quadrature formulae, errata Math. Comput. 23 892

5Arguments

1: $\mathbf{ya}$Real (Kind=nag_wp) Input
On entry: $a$, the lower limit of the integral.
2: $\mathbf{yb}$Real (Kind=nag_wp) Input
On entry: $b$, the upper limit of the integral. It is not necessary that $a.
3: $\mathbf{phi1}$real (Kind=nag_wp) Function, supplied by the user. External Procedure
phi1 must return the lower limit of the inner integral for a given value of $y$.
The specification of phi1 is:
Fortran Interface
 Function phi1 ( y)
 Real (Kind=nag_wp) :: phi1 Real (Kind=nag_wp), Intent (In) :: y
 double phi1 (const double *y)
1: $\mathbf{y}$Real (Kind=nag_wp) Input
On entry: the value of $y$ for which the lower limit must be evaluated.
phi1 must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d01daf is called. Arguments denoted as Input must not be changed by this procedure.
Note: phi1 should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d01daf. If your code inadvertently does return any NaNs or infinities, d01daf is likely to produce unexpected results.
4: $\mathbf{phi2}$real (Kind=nag_wp) Function, supplied by the user. External Procedure
phi2 must return the upper limit of the inner integral for a given value of $y$.
The specification of phi2 is:
Fortran Interface
 Function phi2 ( y)
 Real (Kind=nag_wp) :: phi2 Real (Kind=nag_wp), Intent (In) :: y
 double phi2 (const double *y)
1: $\mathbf{y}$Real (Kind=nag_wp) Input
On entry: the value of $y$ for which the upper limit must be evaluated.
phi2 must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d01daf is called. Arguments denoted as Input must not be changed by this procedure.
Note: phi2 should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d01daf. If your code inadvertently does return any NaNs or infinities, d01daf is likely to produce unexpected results.
5: $\mathbf{f}$real (Kind=nag_wp) Function, supplied by the user. External Procedure
f must return the value of the integrand $f$ at a given point.
The specification of f is:
Fortran Interface
 Function f ( x, y)
 Real (Kind=nag_wp) :: f Real (Kind=nag_wp), Intent (In) :: x, y
 double f (const double *x, const double *y)
1: $\mathbf{x}$Real (Kind=nag_wp) Input
2: $\mathbf{y}$Real (Kind=nag_wp) Input
On entry: the coordinates of the point $\left(x,y\right)$ at which the integrand $f$ must be evaluated.
f must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d01daf is called. Arguments denoted as Input must not be changed by this procedure.
Note: f should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d01daf. If your code inadvertently does return any NaNs or infinities, d01daf is likely to produce unexpected results.
6: $\mathbf{absacc}$Real (Kind=nag_wp) Input
On entry: the absolute accuracy requested.
7: $\mathbf{ans}$Real (Kind=nag_wp) Output
On exit: the estimated value of the integral.
8: $\mathbf{npts}$Integer Output
On exit: the total number of function evaluations.
9: $\mathbf{ifail}$Integer Input/Output
On entry: ifail must be set to $0$, $-1$ or $1$ to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $-1$ means that an error message is printed while a value of $1$ means that it is not.
If halting is not appropriate, the value $-1$ or $1$ is recommended. If message printing is undesirable, then the value $1$ is recommended. Otherwise, the value $-1$ is recommended since useful values can be provided in some output arguments even when ${\mathbf{ifail}}\ne {\mathbf{0}}$ on exit. When the value $-\mathbf{1}$ or $\mathbf{1}$ is used it is essential to test the value of ifail on exit.
On exit: ${\mathbf{ifail}}={\mathbf{0}}$ unless the routine detects an error or a warning has been flagged (see Section 6).

6Error Indicators and Warnings

If on entry ${\mathbf{ifail}}=0$ or $-1$, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
Note: in some cases d01daf may return useful information.
The outer integral has converged, but $n$ of the inner integrals have not converged with $255$ points: $n=⟨\mathit{\text{value}}⟩$. ans may still contain an approximate estimate of the integral, but its reliability will decrease as $n$ increases.
The outer integral has not converged, and $n$ of the inner integrals have not converged with $255$ points: $n=⟨\mathit{\text{value}}⟩$. ans may still contain an approximate estimate of the integral, but its reliability will decrease as $n$ increases.
${\mathbf{ifail}}=1$
The outer integral has not converged with $255$ points. However, all the inner integrals have converged, and ans may still contain an approximate estimate of the integral.
${\mathbf{ifail}}=-99$
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
${\mathbf{ifail}}=-399$
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
${\mathbf{ifail}}=-999$
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7Accuracy

The absolute accuracy is specified by the variable absacc. If, on exit, ${\mathbf{ifail}}={\mathbf{0}}$ then the result is most likely correct to this accuracy. Even if ifail is nonzero on exit, it is still possible that the calculated result could differ from the true value by less than the given accuracy.

8Parallelism and Performance

d01daf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

The time taken by d01daf depends upon the complexity of the integrand and the accuracy requested.
With Patterson's method accidental convergence may occasionally occur, when two estimates of an integral agree to within the requested accuracy, but both estimates differ considerably from the true result. This could occur in either the outer integral or in one or more of the inner integrals.
If it occurs in the outer integral then apparent convergence is likely to be obtained with considerably fewer integrand evaluations than may be expected. If it occurs in an inner integral, the incorrect value could make the function $F\left(y\right)$ appear to be badly behaved, in which case a very large number of pivots may be needed for the overall evaluation of the integral. Thus both unexpectedly small and unexpectedly large numbers of integrand evaluations should be considered as indicating possible trouble. If accidental convergence is suspected, the integral may be recomputed, requesting better accuracy; if the new request is more stringent than the degree of accidental agreement (which is of course unknown), improved results should be obtained. This is only possible when the accidental agreement is not better than machine accuracy. It should be noted that the routine requests the same accuracy for the inner integrals as for the outer integral. In practice it has been found that in the vast majority of cases this has proved to be adequate for the overall result of the double integral to be accurate to within the specified value.
The routine is not well-suited to non-smooth integrands, i.e., integrands having some kind of analytic discontinuity (such as a discontinuous or infinite partial derivative of some low-order) in, on the boundary of, or near, the region of integration. Warning: such singularities may be induced by incautiously presenting an apparently smooth interval over the positive quadrant of the unit circle, $R$
 $I=∫R(x+y)dx dy.$
This may be presented to d01daf as
 $I=∫01 dy ∫01-y2 (x+y)dx=∫01 (12(1-y2)+y⁢1-y2) dy$
but here the outer integral has an induced square-root singularity stemming from the way the region has been presented to d01daf. This situation should be avoided by re-casting the problem. For the example given, the use of polar coordinates would avoid the difficulty:
 $I=∫01dr∫0π2r2(cos⁡υ+sin⁡υ)dυ.$

10Example

This example evaluates the integral discussed in Section 9, presenting it to d01daf first as
 $∫01 ∫01-y2(x+y) dx dy$
and then as
 $∫01∫0π2r2(cos⁡υ+sin⁡υ)dυ dr.$
Note the difference in the number of function evaluations.

10.1Program Text

Program Text (d01dafe.f90)

None.

10.3Program Results

Program Results (d01dafe.r)