e04fcc (lsq_uncon_mod_func_comp) : NAG Library CL Interface, Mark 28

e04fcc is a comprehensive algorithm for finding an unconstrained minimum of a sum of squares of

m

nonlinear functions in

n

variables

(m \geq n)

. No derivatives are required.

e04fcc is intended for objective functions which have continuous first and second derivatives (although it will usually work even if the derivatives have occasional discontinuities).

The function may be called by the names: e04fcc, nag_opt_lsq_uncon_mod_func_comp or nag_opt_lsq_no_deriv.

e04fcc is applicable to problems of the form:

Minimize ​ F (x) = \sum_{i = 1}^{m} {[f_{i} (x)]}^{2}

where

x = {(x_{1}, x_{2}, \dots, x_{n})}^{T}

and

m \geq n

. (The functions

f_{i} (x)

are often referred to as ‘residuals’.) You must supply a C function, lsqfun, to calculate the values of the

f_{i} (x)

at any point

x

.

From a starting point

x^{(1)}

e04fcc generates a sequence of points

x^{(2)}, x^{(3)}, \dots,

which is intended to converge to a local minimum of

F (x)

. The sequence of points is given by

x^{(k + 1)} = x^{(k)} + α^{(k)} p^{(k)}

where the vector

p^{(k)}

is a direction of search, and

α^{(k)}

is chosen such that

F (x^{(k)} + α^{(k)} p^{(k)})

is approximately a minimum with respect to

α^{(k)}

.

The vector

p^{(k)}

used depends upon the reduction in the sum of squares obtained during the last iteration. If the sum of squares was sufficiently reduced, then

p^{(k)}

is an approximation to the Gauss–Newton direction; otherwise additional function evaluations are made so as to enable

p^{(k)}

to be a more accurate approximation to the Newton direction.

The method is designed to ensure that steady progress is made whatever the starting point, and to have the rapid ultimate convergence of Newton's method.

Gill P E and Murray W (1978) Algorithms for the solution of the nonlinear least squares problem SIAM J. Numer. Anal. 15 977–992

If the problem is reasonably well scaled and a successful exit is made, then, for a computer with a mantissa of

t

decimals, one would expect to get about

t / 2 - 1

decimals accuracy in the components of

x

and between

t - 1

(if

F (x)

is of order 1 at the minimum) and

2 t - 2

(if

F (x)

is close to zero at the minimum) decimals accuracy in

F (x)

.

A successful exit (NE_NOERROR) is made from e04fcc when (B1, B2 and B3) or B4 or B5 hold, where

$B 1 \equiv α^{(k)} \times ‖ p^{(k)} ‖ < (options . optim_tol + ε) \times (1.0 + ‖ x^{(k)} ‖)$
$B 2 \equiv | F^{(k)} - F^{(k - 1)} | < {(options . optim_tol + ε)}^{2} \times (1.0 + F^{(k)})$
$B 3 \equiv ‖ g^{(k)} ‖ < (ε^{1 / 3} + options . optim_tol) \times (1.0 + F^{(k)})$
$B 4 \equiv F^{(k)} < ε^{2}$
$B 5 \equiv ‖ g^{(k)} ‖ < {(ε \times \sqrt{F^{(k)}})}^{1 / 2}$

and where

‖ . ‖

,

ε

and the optional parameter

options . optim_tol

are as defined in Section 11.2, while

F^{(k)}

and

g^{(k)}

are the values of

F (x)

and its vector of estimated first derivatives at

x^{(k)}

.

If

fail . code = NE_NOERROR

then the vector in x on exit,

x_{sol}

, is almost certainly an estimate of

x_{true}

, the position of the minimum to the accuracy specified by

options . optim_tol

.

If

fail . code = NW_COND_MIN

, then

x_{sol}

may still be a good estimate of

x_{true}

, but to verify this you should make the following checks. If

(a)the sequence ${F (x^{(k)})}$ converges to $F (x_{sol})$ at a superlinear or a fast linear rate, and
(b) $g {(x_{sol})}^{T} g (x_{sol}) < 10 ε$ ,

where

T

denotes transpose, then it is almost certain that

x_{sol}

is a close approximation to the minimum. When (b) is true, then usually

F (x_{sol})

is a close approximation to

F (x_{true})

.

Further suggestions about confirmation of a computed solution are given in the E04 Chapter Introduction.

Background information to multithreading can be found in the Multithreading documentation.

e04fcc is not threaded in any implementation.

The number of iterations required depends on the number of variables, the number of residuals, the behaviour of

F (x)

, the accuracy demanded and the distance of the starting point from the solution. The number of multiplications performed per iteration of e04fcc varies, but for

m > > n

is approximately

n \times m^{2} + O (n^{3})

. In addition, each iteration makes at least

n + 1

calls of lsqfun. So, unless the residuals can be evaluated very quickly, the run time will be dominated by the time spent in lsqfun.

Ideally, the problem should be scaled so that, at the solution,

F (x)

and the corresponding values of the

x_{j}

are each in the range

(−1, + 1)

, and so that at points one unit away from the solution,

F (x)

differs from its value at the solution by approximately one unit. This will usually imply that the Hessian matrix of

F (x)

at the solution is well-conditioned. It is unlikely that you will be able to follow these recommendations very closely, but it is worth trying (by guesswork), as sensible scaling will reduce the difficulty of the minimization problem, so that e04fcc will take less computer time.

When the sum of squares represents the goodness-of-fit of a nonlinear model to observed data, elements of the variance-covariance matrix of the estimated regression coefficients can be computed by a subsequent call to e04ycc, using information returned in the arrays

options . s

and

options . v

. See e04ycc for further details.

This example shows option values being assigned directly within the program text and by reading values from a data file. The options structure is declared and initialized by e04xxc. Values are then assigned directly to options

options . outfile

and

options . optim_tol

and two further options are read from the data file by use of e04xyc. The memory freeing function e04xzc is used to free the memory assigned to the pointers in the option structure. You must not use the standard C function free() for this purpose.

Program Text (e04fcce.c)

Program Data (e04fcce.d)

Program Options (e04fcce.opt)

Program Results (e04fcce.r)

A number of optional input and output arguments to e04fcc are available through the structure argument options, type Nag_E04_Opt. An argument may be selected by assigning an appropriate value to the relevant structure member; those arguments not selected will be assigned default values. If no use is to be made of any of the optional parameters you should use the NAG defined null pointer, E04_DEFAULT, in place of options when calling e04fcc; the default settings will then be used for all arguments.

Before assigning values to options directly the structure must be initialized by a call to the function e04xxc. Values may then be assigned to the structure members in the normal C manner.

After return from e04fcc, the options structure may only be re-used for future calls of e04fcc if the dimensions of the new problem are the same. Otherwise, the structure must be cleared by a call of e04xzc) and re-initialized by a call of e04xxc before future calls. Failure to do this will result in unpredictable behaviour.

Option settings may also be read from a text file using the function e04xyc in which case initialization of the options structure will be performed automatically if not already done. Any subsequent direct assignment to the options structure must not be preceded by initialization.

If assignment of functions and memory to pointers in the options structure is required, this must be done directly in the calling program, they cannot be assigned using e04xyc.

For easy reference, the following list shows the members of options which are valid for e04fcc together with their default values where relevant. The number

ε

is a generic notation for machine precision (see X02AJC).

Boolean list	Nag_TRUE
Nag_PrintType print_level	$Nag_Soln_Iter$
char outfile[512]	stdout
void (*print_fun)()	NULL
Integer max_iter	$\max (50, 5 n)$
double optim_tol	$\sqrt{ε}$
double linesearch_tol	$0.5$ ( $0.0$ if $n = 1$ )
double step_max	100000.0
double *s	size n
double *v	size $n \times n$
Integer tdv	n
Integer grade
Integer iter
Integer nf

On entry: if

options . list = Nag_TRUE

the argument settings in the call to e04fcc will be printed.

On entry: the level of results printout produced by e04fcc. The following values are available:

$Nag_NoPrint$	No output.
$Nag_Soln$	The final solution.
$Nag_Iter$	One line of output for each iteration.
$Nag_Soln_Iter$	The final solution and one line of output for each iteration.
$Nag_Soln_Iter_Full$	The final solution and detailed printout at each iteration.

Details of each level of results printout are described in Section 9.

Constraint:

options . print_level = Nag_NoPrint

,

Nag_Soln

,

Nag_Iter

,

Nag_Soln_Iter

or

Nag_Soln_Iter_Full

.

On entry: the name of the file to which results should be printed. If

options . outfile [0] =' \0'

then the stdout stream is used.

On entry: printing function defined by you; the prototype of

options . print_fun

is

void (*print_fun)(const Nag_Search_State *st, Nag_Comm *comm);

See Section 9 for further details.

On entry: the limit on the number of iterations allowed before termination.

Constraint:

options . max_iter \geq 0

.

On entry: the accuracy in

x

to which the solution is required. If

x_{true}

is the true value of

x

at the minimum, then

x_{sol}

, the estimated position prior to a normal exit, is such that

$‖ x_{sol} - x_{true} ‖ < options . optim_tol \times (1.0 + ‖ x_{true} ‖),$

where

‖ y ‖ = {(\sum_{j = 1}^{n} y_{j}^{2})}^{1 / 2}

. For example, if the elements of

x_{sol}

are not much larger than

1.0

in modulus and if

options . optim_tol = 1.0 \times 10^{−5}

, then

x_{sol}

is usually accurate to about 5 decimal places. (For further details see Section 9.) If

F (x)

and the variables are scaled roughly as described in Section 9 and

ε

is the machine precision, then a setting of order

options . optim_tol = \sqrt{ε}

will usually be appropriate.

Constraint:

10 ε \leq options . optim_tol < 1.0

.

On entry: every iteration of e04fcc involves a linear minimization, i.e., minimization of

F (x^{(k)} + α^{(k)} p^{(k)})

with respect to

α^{(k)}

.

options . linesearch_tol

specifies how accurately the linear minimizations are to be performed. The minimum with respect to

α^{(k)}

will be located more accurately for small values of

options . linesearch_tol

(say 0.01) than for large values (say 0.9). Although accurate linear minimizations will generally reduce the number of iterations performed by e04fcc, they will increase the number of calls of lsqfun made each iteration. On balance it is usually more efficient to perform a low accuracy minimization.

Constraint:

0.0 \leq options . linesearch_tol < 1.0

.

On entry: an estimate of the Euclidean distance between the solution and the starting point supplied. (For maximum efficiency, a slight overestimate is preferable.) e04fcc will ensure that, for each iteration,

$\sum_{j = 1}^{n} {(x_{j}^{(k)} - x_{j}^{(k - 1)})}^{2} \leq {(options . step_max)}^{2}$

where

k

is the iteration number. Thus, if the problem has more than one solution, e04fcc is most likely to find the one nearest to the starting point. On difficult problems, a realistic choice can prevent the sequence

x^{(k)}

entering a region where the problem is ill-behaved and can help avoid overflow in the evaluation of

F (x)

. However, an underestimate of

options . step_max

can lead to inefficiency.

Constraint:

options . step_max \geq options . optim_tol

.

On entry: n values of memory will be automatically allocated by e04fcc and this is the recommended method of use of

options . s

. However you may supply memory from the calling program.

On exit: the singular values of the estimated Jacobian matrix at the final point. Thus

options . s

may be useful as information about the structure of your problem.

On entry:

n \times n

values of memory will be automatically allocated by e04fcc and this is the recommended method of use of

options . v

. However you may supply memory from the calling program.

On exit: the matrix

V

associated with the singular value decomposition

J = {U S V}^{T}

of the estimated Jacobian matrix at the final point, stored by rows. This matrix may be useful for statistical purposes, since it is the matrix of orthonormalized eigenvectors of

J^{T} J

.

On entry: if memory is supplied then

options . tdv

must contain the last dimension of the array assigned to

options . tdv

as declared in the function from which e04fcc is called.

On exit: the trailing dimension used by

options . v

. If the Nag default memory allocation has been used this value will be n.

Constraint:

options . tdv \geq n

.

On exit: the grade of the Jacobian at the final point. e04fcc estimates the dimension of the subspace for which the Jacobian matrix can be used as a valid approximation to the curvature (see Gill and Murray (1978)); this estimate is called the grade.

On exit: the number of iterations which have been performed in e04fcc.

On exit: the number of times the residuals have been evaluated (i.e., number of calls of lsqfun).

The level of printed output can be controlled with the structure members

options . list

and

options . print_level

(see Section 11.2). If

options . list = Nag_TRUE

then the argument values to e04fcc are listed, whereas the printout of results is governed by the value of

options . print_level

. The default of

options . print_level = Nag_Soln_Iter

provides a single line of output at each iteration and the final result. This section describes all of the possible levels of results printout available from e04fcc.

When

options . print_level = Nag_Iter

or

Nag_Soln_Iter

a single line of output is produced on completion of each iteration, this gives the following values:

Itn	the current iteration number $k$ .
Nfun	the cumulative number of calls to lsqfun.
Objective	the value of the objective function, $F (x^{(k)})$ .
Norm g	the Euclidean norm of the gradient of $F (x^{(k)})$ .
Norm x	the Euclidean norm of $x^{(k)}$ .
Norm(x(k-1)-x(k))	the Euclidean norm of $x^{(k - 1)} - x^{(k)}$ .
Step	the step $α^{(k)}$ taken along the computed search direction $p^{(k)}$ .

When

options . print_level = Nag_Soln_Iter_Full

more detailed results are given at each iteration. Additional values output are:

Grade	the grade of the Jacobian matrix. (See description of $options . grade$ , Section 11.2
x	the current point $x^{(k)}$ .
g	the current estimate of the gradient of $F (x^{(k)})$ .
Singular values	the singular values of the current approximation to the Jacobian matrix.

If

options . print_level = Nag_Soln

,

Nag_Soln_Iter

or

Nag_Soln_Iter_Full

the final result is printed out. This consists of:

x	the final point $x^{*}$ .
g	the estimate of the gradient of $F$ at the final point.
Residuals	the values of the residuals $f_{i}$ at the final point.
Sum of squares	the value of $F (x^{*})$ , the sum of squares of the residuals at the final point.

If

options . print_level = Nag_NoPrint

then printout will be suppressed; you can print the final solution when e04fcc returns to the calling program.

You may also specify your own print function for output of iteration results and the final solution by use of the

options . print_fun

function pointer, which has prototype

void (*print_fun)(const Nag_Search_State *st, Nag_Comm *comm);

The rest of this section can be skipped if the default printing facilities provide the required functionality.

When a user-defined function is assigned to

options . print_fun

this will be called in preference to the internal print function of e04fcc. Calls to the user-defined function are again controlled by means of the

options . print_level

member. Information is provided through st and comm, the two structure arguments to

options . print_fun

. If

comm \to it_prt = Nag_TRUE

then the results from the last iteration of e04fcc are in the following members of st:

The relevant members of the structure comm are:

NAG CL Interface
e04fcc (lsq_uncon_mod_func_comp)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

11 Optional Parameters

11.1 Optional Parameter Checklist and Default Values

11.2 Description of the Optional Parameters

11.3 Description of Printed Output

11.3.1 Output of results via a user-defined printing function

NAG CL Interfacee04fcc (lsq_​uncon_​mod_​func_​comp)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

11 Optional Parameters

11.1 Optional Parameter Checklist and Default Values

11.2 Description of the Optional Parameters

11.3 Description of Printed Output

11.3.1 Output of results via a user-defined printing function

NAG CL Interface
e04fcc (lsq_uncon_mod_func_comp)