Integer, Intent (In)	::	nxy, nl
Integer, Intent (Inout)	::	ifail
Real (Kind=nag_wp), Intent (In)	::	x(nxy), y(nxy)
Real (Kind=nag_wp), Intent (Out)	::	s, r0, r(nl), stat

C Header Interface

#include <nag.h>

void	g13bcf_ (const double x[], const double y[], const Integer nxy, const Integer nl, double s, double r0, double r[], double stat, Integer ifail)

The routine may be called by the names g13bcf or nagf_tsa_multi_xcorr.

3 Description

Given two series

x_{1}, x_{2}, \dots, x_{n}

and

y_{1}, y_{2}, \dots, y_{n}

the routine calculates the cross-correlations between

x_{t}

and lagged values of

y_{t}

r_{x y} (l) = \frac{\sum_{t = 1}^{n - l} (x_{t} - \bar{x}) (y_{t + l} - \bar{y})}{n s_{x} s_{y}}, l = 0, 1, \dots, L

where

\bar{x} = \frac{\sum_{t = 1}^{n} x_{t}}{n}

s_{x}^{2} = \frac{\sum_{t = 1}^{n} {(x_{t} - \bar{x})}^{2}}{n}

and similarly for

y

The ratio of standard deviations

s_{y} / s_{x}

is also returned, and a portmanteau statistic is calculated:

stat = n \sum_{l = 1}^{L} r_{x y} {(l)}^{2} .

Provided

n

is large,

L

much less than

n

, and both

x_{t}, y_{t}

are samples of series whose true autocorrelation functions are zero, then, under the null hypothesis that the true cross-correlations between the series are zero, stat has a

χ^{2}

-distribution with

L

degrees of freedom. Values of stat in the upper tail of this distribution provide evidence against the null hypothesis.

4 References

Box G E P and Jenkins G M (1976) Time Series Analysis: Forecasting and Control (Revised Edition) Holden–Day

5 Arguments

1: $x (nxy)$ – Real (Kind=nag_wp) array Input: On entry: the $n$ values of the $x$ series.
2: $y (nxy)$ – Real (Kind=nag_wp) array Input: On entry: the $n$ values of the $y$ series.
3: $nxy$ – Integer Input: On entry: $n$ , the length of the time series.

Constraint: $nxy \geq 2$ .
4: $nl$ – Integer Input: On entry: $L$ , the maximum lag for calculating cross-correlations.

Constraint: $1 \leq nl < nxy$ .
5: $s$ – Real (Kind=nag_wp) Output: On exit: the ratio of the standard deviation of the $y$ series to the standard deviation of the $x$ series, $s_{y} / s_{x}$ .
6: $r0$ – Real (Kind=nag_wp) Output: On exit: the cross-correlation between the $x$ and $y$ series at lag zero.
7: $r (nl)$ – Real (Kind=nag_wp) array Output: On exit: $r (l)$ contains the cross-correlations between the $x$ and $y$ series at lags $L$ , $r_{x y} (l)$ , for $l = 1, 2, \dots, L$ .
8: $stat$ – Real (Kind=nag_wp) Output: On exit: the statistic for testing for absence of cross-correlation.
9: $ifail$ – Integer Input/Output: On entry: ifail must be set to $0$ , $−1$ or $1$ to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $−1$ means that an error message is printed while a value of $1$ means that it is not.

If halting is not appropriate, the value $−1$ or $1$ is recommended. If message printing is undesirable, then the value $1$ is recommended. Otherwise, the value $0$ is recommended. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit: $ifail = 0$ unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

−1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 1$: On entry, $nl = ⟨ value ⟩$ .
Constraint: $nl \geq 1$ .

On entry, $nl = ⟨ value ⟩$ and $nxy = ⟨ value ⟩$ .
Constraint: $1 \leq nl < nxy$ .

On entry, $nxy = ⟨ value ⟩$ .
Constraint: $nxy > 1$ .

$ifail = 2$: One or both of the $x$ and $y$ series have zero variance.

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

All computations are believed to be stable.

8 Parallelism and Performance

Background information to multithreading can be found in the Multithreading documentation.

g13bcf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.

g13bcf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

n < 100

, or

L < 10 \log (n)

then the autocorrelations are calculated directly and the time taken by g13bcf is approximately proportional to

n L

, otherwise the autocorrelations are calculated by utilizing fast Fourier transforms (FFTs) and the time taken is approximately proportional to

n \log (n)

. If FFTs are used then g13bcf internally allocates approximately

6 n

real elements.

10 Example

This example reads two time series of length

20

. It calculates and prints the cross-correlations up to lag

15

for the first series leading the second series and then for the second series leading the first series.

g13bc: FL CL CPP AD PY MB

NAG FL Interfaceg13bcf (multi_​xcorr)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG FL Interface
g13bcf (multi_xcorr)