NAG FL Interface
d03pkf (dim1_​parab_​dae_​keller)

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

1: $\mathbf{npde}$ – Integer Input

On entry: the number of PDEs to be solved.

Constraint: $\mathbf{npde}\ge 1$.

2: $\mathbf{ts}$ – Real (Kind=nag_wp) Input/Output

On entry: the initial value of the independent variable $t$.

Constraint: $\mathbf{ts}<\mathbf{tout}$.

On exit: the value of $t$ corresponding to the solution in u. Normally $\mathbf{ts}=\mathbf{tout}$.

3: $\mathbf{tout}$ – Real (Kind=nag_wp) Input

On entry: the final value of $t$ to which the integration is to be carried out.

4: $\mathbf{pdedef}$ – Subroutine, supplied by the user. External Procedure

pdedef must evaluate the functions $G_i$ which define the system of PDEs. pdedef is called approximately midway between each pair of mesh points in turn by d03pkf.

The specification of pdedef is:

Fortran Interface copy

Subroutine pdedef ( npde, t, x, u, ut, ux, nv, v, vdot, res, ires) Integer, Intent (In) :: npde, nv Integer, Intent (Inout) :: ires Real (Kind=nag_wp), Intent (In) :: t, x, u(npde), ut(npde), ux(npde), v(nv), vdot(nv) Real (Kind=nag_wp), Intent (Out) :: res(npde)

C Header Interface copy

void  pdedef (const Integer *npde, const double *t, const double *x, const double u[], const double ut[], const double ux[], const Integer *nv, const double v[], const double vdot[], double res[], Integer *ires)

C++ Header Interface copy

#include <nag.h> extern "C" { void  pdedef (const Integer &npde, const double &t, const double &x, const double u[], const double ut[], const double ux[], const Integer &nv, const double v[], const double vdot[], double res[], Integer &ires) }

1: $\mathbf{npde}$ – Integer Input

On entry: the number of PDEs in the system.

2: $\mathbf{t}$ – Real (Kind=nag_wp) Input

On entry: the current value of the independent variable $t$.

3: $\mathbf{x}$ – Real (Kind=nag_wp) Input

On entry: the current value of the space variable $x$.

4: $\mathbf{u}\left(\mathbf{npde}\right)$ – Real (Kind=nag_wp) array Input

On entry: $\mathbf{u}\left(\mathit{i}\right)$ contains the value of the component $U_{\mathit{i}}(x,t)$, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$.

5: $\mathbf{ut}\left(\mathbf{npde}\right)$ – Real (Kind=nag_wp) array Input

On entry: $\mathbf{ut}\left(\mathit{i}\right)$ contains the value of the component $\frac{\partial U_{\mathit{i}}(x,t)}{\partial t}$, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$.

6: $\mathbf{ux}\left(\mathbf{npde}\right)$ – Real (Kind=nag_wp) array Input

On entry: $\mathbf{ux}\left(\mathit{i}\right)$ contains the value of the component $\frac{\partial U_{\mathit{i}}(x,t)}{\partial x}$, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$.

7: $\mathbf{nv}$ – Integer Input

On entry: the number of coupled ODEs in the system.

8: $\mathbf{v}\left(\mathbf{nv}\right)$ – Real (Kind=nag_wp) array Input

On entry: if $\mathbf{nv}>0$, $\mathbf{v}\left(\mathit{i}\right)$ contains the value of the component $V_{\mathit{i}}\left(t\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{nv}$.

9: $\mathbf{vdot}\left(\mathbf{nv}\right)$ – Real (Kind=nag_wp) array Input

On entry: if $\mathbf{nv}>0$, $\mathbf{vdot}\left(\mathit{i}\right)$ contains the value of component ${\stackrel{.}{V}}_{\mathit{i}}\left(t\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{nv}$.

10: $\mathbf{res}\left(\mathbf{npde}\right)$ – Real (Kind=nag_wp) array Output

On exit: $\mathbf{res}\left(\mathit{i}\right)$ must contain the $\mathit{i}$th component of $G$, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$, where $G$ is defined as

$$G_{\mathit{i}}=\sum _{\mathit{j}=1}^{\mathbf{npde}}{P}_{\mathit{i},\mathit{j}}\frac{\partial U_{\mathit{j}}}{\partial t}+\sum _{\mathit{j}=1}^{\mathbf{nv}}{Q}_{\mathit{i},\mathit{j}}{\stackrel{.}{V}}_{\mathit{j}}\text{,}$$

(9)

i.e., only terms depending explicitly on time derivatives, or

$$G_{\mathit{i}}=\sum _{\mathit{j}=1}^{\mathbf{npde}}{P}_{\mathit{i},\mathit{j}}\frac{\partial U_{\mathit{j}}}{\partial t}+\sum _{\mathit{j}=1}^{\mathbf{nv}}{Q}_{\mathit{i},\mathit{j}}{\stackrel{.}{V}}_{\mathit{j}}+S_{\mathit{i}}\text{,}$$

(10)

i.e., all terms in equation (3).

The definition of $G$ is determined by the input value of ires.

11: $\mathbf{ires}$ – Integer Input/Output

On entry: the form of $G_i$ that must be returned in the array res.

$\mathbf{ires}=\mathrm{-1}$

Equation (9) must be used.

$\mathbf{ires}=1$

Equation (10) must be used.

On exit: should usually remain unchanged. However, you may set ires to force the integration routine to take certain actions, as described below:

$\mathbf{ires}=2$

Indicates to the integrator that control should be passed back immediately to the calling (sub)routine with the error indicator set to $\mathbf{ifail}=\mathbf{6}$.

$\mathbf{ires}=3$

Indicates to the integrator that the current time step should be abandoned and a smaller time step used instead. You may wish to set $\mathbf{ires}=3$ when a physically meaningless input or output value has been generated. If you consecutively set $\mathbf{ires}=3$, d03pkf returns to the calling subroutine with the error indicator set to $\mathbf{ifail}=\mathbf{4}$.

pdedef must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d03pkf is called. Arguments denoted as Input must not be changed by this procedure.

Note: pdedef should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d03pkf. If your code inadvertently does return any NaNs or infinities, d03pkf is likely to produce unexpected results.

5: $\mathbf{bndary}$ – Subroutine, supplied by the user. External Procedure

bndary must evaluate the functions $G_i^L$ and $G_i^R$ which describe the boundary conditions, as given in (5) and (6).

The specification of bndary is:

Fortran Interface copy

Subroutine bndary ( npde, t, ibnd, nobc, u, ut, nv, v, vdot, res, ires) Integer, Intent (In) :: npde, ibnd, nobc, nv Integer, Intent (Inout) :: ires Real (Kind=nag_wp), Intent (In) :: t, u(npde), ut(npde), v(nv), vdot(nv) Real (Kind=nag_wp), Intent (Out) :: res(nobc)

C Header Interface copy

void  bndary (const Integer *npde, const double *t, const Integer *ibnd, const Integer *nobc, const double u[], const double ut[], const Integer *nv, const double v[], const double vdot[], double res[], Integer *ires)

C++ Header Interface copy

#include <nag.h> extern "C" { void  bndary (const Integer &npde, const double &t, const Integer &ibnd, const Integer &nobc, const double u[], const double ut[], const Integer &nv, const double v[], const double vdot[], double res[], Integer &ires) }

1: $\mathbf{npde}$ – Integer Input

On entry: the dimension of the array u and the dimension of the array ut as declared in the (sub)program from which d03pkf is called. The number of PDEs in the system.

2: $\mathbf{t}$ – Real (Kind=nag_wp) Input

On entry: the current value of the independent variable $t$.

3: $\mathbf{ibnd}$ – Integer Input

On entry: specifies which boundary conditions are to be evaluated.

$\mathbf{ibnd}=0$

bndary must compute the left-hand boundary condition at $x=a$.

$\mathbf{ibnd}\ne 0$

bndary must compute the right-hand boundary condition at $x=b$.

4: $\mathbf{nobc}$ – Integer Input

On entry: specifies the number of boundary conditions at the boundary specified by ibnd.

5: $\mathbf{u}\left(\mathbf{npde}\right)$ – Real (Kind=nag_wp) array Input

On entry: $\mathbf{u}\left(\mathit{i}\right)$ contains the value of the component $U_{\mathit{i}}(x,t)$ at the boundary specified by ibnd, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$.

6: $\mathbf{ut}\left(\mathbf{npde}\right)$ – Real (Kind=nag_wp) array Input

On entry: $\mathbf{ut}\left(\mathit{i}\right)$ contains the value of the component $\frac{\partial U_{\mathit{i}}(x,t)}{\partial t}$ at the boundary specified by ibnd, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$.

7: $\mathbf{nv}$ – Integer Input

On entry: the number of coupled ODEs in the system.

8: $\mathbf{v}\left(\mathbf{nv}\right)$ – Real (Kind=nag_wp) array Input

On entry: if $\mathbf{nv}>0$, $\mathbf{v}\left(\mathit{i}\right)$ contains the value of the component $V_{\mathit{i}}\left(t\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{nv}$.

9: $\mathbf{vdot}\left(\mathbf{nv}\right)$ – Real (Kind=nag_wp) array Input

On entry: if $\mathbf{nv}>0$, $\mathbf{vdot}\left(\mathit{i}\right)$ contains the value of component ${\stackrel{.}{V}}_{\mathit{i}}\left(t\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{nv}$.

Note: $\mathbf{vdot}\left(\mathit{i}\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{nv}$, may only appear linearly as in (7) and (8).

10: $\mathbf{res}\left(\mathbf{nobc}\right)$ – Real (Kind=nag_wp) array Output

On exit: $\mathbf{res}\left(\mathit{i}\right)$ must contain the $\mathit{i}$th component of $G^L$ or $G^R$, depending on the value of ibnd, for $\mathit{i}=1,2,\dots ,\mathbf{nobc}$, where $G^L$ is defined as

$$G_{\mathit{i}}^L=\sum _{\mathit{j}=1}^{\mathbf{npde}}{E}_{\mathit{i},\mathit{j}}^L\frac{\partial U_{\mathit{j}}}{\partial t}+\sum _{\mathit{j}=1}^{\mathbf{nv}}{H}_{\mathit{i},\mathit{j}}^L{\stackrel{.}{V}}_{\mathit{j}}\text{,}$$

(11)

i.e., only terms depending explicitly on time derivatives, or

$$G_{\mathit{i}}^L=\sum _{\mathit{j}=1}^{\mathbf{npde}}{E}_{\mathit{i},\mathit{j}}^L\frac{\partial U_{\mathit{j}}}{\partial t}+\sum _{\mathit{j}=1}^{\mathbf{nv}}{H}_{\mathit{i},\mathit{j}}^L{\stackrel{.}{V}}_{\mathit{j}}+K_{\mathit{i}}^L\text{,}$$

(12)

i.e., all terms in equation (7), and similarly for $G_{\mathit{i}}^R$.

The definitions of $G^L$ and $G^R$ are determined by the input value of ires.

11: $\mathbf{ires}$ – Integer Input/Output

On entry: the form of $G_i^L$ (or $G_i^R$) that must be returned in the array res.

$\mathbf{ires}=\mathrm{-1}$

Equation (11) must be used.

$\mathbf{ires}=1$

Equation (12) must be used.

On exit: should usually remain unchanged. However, you may set ires to force the integration routine to take certain actions as described below:

$\mathbf{ires}=2$

Indicates to the integrator that control should be passed back immediately to the calling (sub)routine with the error indicator set to $\mathbf{ifail}=\mathbf{6}$.

$\mathbf{ires}=3$

Indicates to the integrator that the current time step should be abandoned and a smaller time step used instead. You may wish to set $\mathbf{ires}=3$ when a physically meaningless input or output value has been generated. If you consecutively set $\mathbf{ires}=3$, d03pkf returns to the calling subroutine with the error indicator set to $\mathbf{ifail}=\mathbf{4}$.

bndary must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d03pkf is called. Arguments denoted as Input must not be changed by this procedure.

Note: bndary should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d03pkf. If your code inadvertently does return any NaNs or infinities, d03pkf is likely to produce unexpected results.

6: $\mathbf{u}\left(\mathbf{neqn}\right)$ – Real (Kind=nag_wp) array Input/Output

On entry: the initial values of the dependent variables defined as follows:

• $\mathbf{u}\left(\mathbf{npde}\times (\mathit{j}-1)+\mathit{i}\right)$ contain $U_{\mathit{i}}(x_{\mathit{j}},t_0)$, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$ and $\mathit{j}=1,2,\dots ,\mathbf{npts}$, and
• $\mathbf{u}\left(\mathbf{npts}\times \mathbf{npde}+\mathit{i}\right)$ contain $V_{\mathit{i}}\left(t_0\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{nv}$.

On exit: the computed solution $U_{\mathit{i}}(x_{\mathit{j}},t)$, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$ and $\mathit{j}=1,2,\dots ,\mathbf{npts}$, and $V_{\mathit{k}}\left(t\right)$, for $\mathit{k}=1,2,\dots ,\mathbf{nv}$, evaluated at $t=\mathbf{ts}$, as follows:

• $\mathbf{u}\left(\mathbf{npde}\times (\mathit{j}-1)+\mathit{i}\right)$ contain $U_{\mathit{i}}(x_{\mathit{j}},t)$, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$ and $\mathit{j}=1,2,\dots ,\mathbf{npts}$, and
• $\mathbf{u}\left(\mathbf{npts}\times \mathbf{npde}+\mathit{i}\right)$ contain $V_{\mathit{i}}\left(t\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{nv}$.

7: $\mathbf{npts}$ – Integer Input

On entry: the number of mesh points in the interval $[a,b]$.

Constraint: $\mathbf{npts}\ge 3$.

8: $\mathbf{x}\left(\mathbf{npts}\right)$ – Real (Kind=nag_wp) array Input

On entry: the mesh points in the space direction. $\mathbf{x}\left(1\right)$ must specify the left-hand boundary, $a$, and $\mathbf{x}\left(\mathbf{npts}\right)$ must specify the right-hand boundary, $b$.

Constraint: $\mathbf{x}\left(1\right)<\mathbf{x}\left(2\right)<\cdots <\mathbf{x}\left(\mathbf{npts}\right)$.

9: $\mathbf{nleft}$ – Integer Input

On entry: the number $n_a$ of boundary conditions at the left-hand mesh point $\mathbf{x}\left(1\right)$.

Constraint: $0\le \mathbf{nleft}\le \mathbf{npde}$.

10: $\mathbf{nv}$ – Integer Input

On entry: the number of coupled ODE components.

Constraint: $\mathbf{nv}\ge 0$.

11: $\mathbf{odedef}$ – Subroutine, supplied by the NAG Library or the user. External Procedure

odedef must evaluate the functions $R$, which define the system of ODEs, as given in (4).

If you wish to compute the solution of a system of PDEs only (i.e., $\mathbf{nv}=0$), odedef must be the dummy routine d03pek. (d03pek is included in the NAG Library.)

The specification of odedef is:

Fortran Interface copy

Subroutine odedef ( npde, t, nv, v, vdot, nxi, xi, ucp, ucpx, ucpt, r, ires) Integer, Intent (In) :: npde, nv, nxi Integer, Intent (Inout) :: ires Real (Kind=nag_wp), Intent (In) :: t, v(nv), vdot(nv), xi(nxi), ucp(npde,nxi), ucpx(npde,nxi), ucpt(npde,nxi) Real (Kind=nag_wp), Intent (Out) :: r(nv)

C Header Interface copy

void  odedef (const Integer *npde, const double *t, const Integer *nv, const double v[], const double vdot[], const Integer *nxi, const double xi[], const double ucp[], const double ucpx[], const double ucpt[], double r[], Integer *ires)

C++ Header Interface copy

#include <nag.h> extern "C" { void  odedef (const Integer &npde, const double &t, const Integer &nv, const double v[], const double vdot[], const Integer &nxi, const double xi[], const double ucp[], const double ucpx[], const double ucpt[], double r[], Integer &ires) }

1: $\mathbf{npde}$ – Integer Input

On entry: the number of PDEs in the system.

2: $\mathbf{t}$ – Real (Kind=nag_wp) Input

On entry: the current value of the independent variable $t$.

3: $\mathbf{nv}$ – Integer Input

On entry: the number of coupled ODEs in the system.

4: $\mathbf{v}\left(\mathbf{nv}\right)$ – Real (Kind=nag_wp) array Input

On entry: if $\mathbf{nv}>0$, $\mathbf{v}\left(\mathit{i}\right)$ contains the value of the component $V_{\mathit{i}}\left(t\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{nv}$.

5: $\mathbf{vdot}\left(\mathbf{nv}\right)$ – Real (Kind=nag_wp) array Input

On entry: if $\mathbf{nv}>0$, $\mathbf{vdot}\left(\mathit{i}\right)$ contains the value of component ${\stackrel{.}{V}}_{\mathit{i}}\left(t\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{nv}$.

6: $\mathbf{nxi}$ – Integer Input

On entry: the number of ODE/PDE coupling points.

7: $\mathbf{xi}\left(\mathbf{nxi}\right)$ – Real (Kind=nag_wp) array Input

On entry: if $\mathbf{nxi}>0$, $\mathbf{xi}\left(\mathit{i}\right)$ contains the ODE/PDE coupling points, ${\xi }_{\mathit{i}}$, for $\mathit{i}=1,2,\dots ,\mathbf{nxi}$.

8: $\mathbf{ucp}(\mathbf{npde},\mathbf{nxi})$ – Real (Kind=nag_wp) array Input

On entry: if $\mathbf{nxi}>0$, $\mathbf{ucp}(\mathit{i},\mathit{j})$ contains the value of $U_{\mathit{i}}(x,t)$ at the coupling point $x={\xi }_{\mathit{j}}$, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$ and $\mathit{j}=1,2,\dots ,\mathbf{nxi}$.

9: $\mathbf{ucpx}(\mathbf{npde},\mathbf{nxi})$ – Real (Kind=nag_wp) array Input

On entry: if $\mathbf{nxi}>0$, $\mathbf{ucpx}(\mathit{i},\mathit{j})$ contains the value of $\frac{\partial U_{\mathit{i}}(x,t)}{\partial x}$ at the coupling point $x={\xi }_{\mathit{j}}$, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$ and $\mathit{j}=1,2,\dots ,\mathbf{nxi}$.

10: $\mathbf{ucpt}(\mathbf{npde},\mathbf{nxi})$ – Real (Kind=nag_wp) array Input

On entry: if $\mathbf{nxi}>0$, $\mathbf{ucpt}(\mathit{i},\mathit{j})$ contains the value of $\frac{\partial U_{\mathit{i}}}{\partial t}$ at the coupling point $x={\xi }_{\mathit{j}}$, for $\mathit{i}=1,2,\dots ,\mathbf{npde}$ and $\mathit{j}=1,2,\dots ,\mathbf{nxi}$.

11: $\mathbf{r}\left(\mathbf{nv}\right)$ – Real (Kind=nag_wp) array Output

On exit: if $\mathbf{nv}>0$, $\mathbf{r}\left(\mathit{i}\right)$ must contain the $\mathit{i}$th component of $R$, for $\mathit{i}=1,2,\dots ,\mathbf{nv}$, where $R$ is defined as

$$R=-B\stackrel{.}{V}-C{U}_t^{*}\text{,}$$

(13)

i.e., only terms depending explicitly on time derivatives, or

$$R=A-B\stackrel{.}{V}-C{U}_t^{*}\text{,}$$

(14)

i.e., all terms in equation (4). The definition of $R$ is determined by the input value of ires.

12: $\mathbf{ires}$ – Integer Input/Output

On entry: the form of $R$ that must be returned in the array r.

$\mathbf{ires}=\mathrm{-1}$

Equation (13) must be used.

$\mathbf{ires}=1$

Equation (14) must be used.

On exit: should usually remain unchanged. However, you may reset ires to force the integration routine to take certain actions, as described below:

$\mathbf{ires}=2$

Indicates to the integrator that control should be passed back immediately to the calling (sub)routine with the error indicator set to $\mathbf{ifail}=\mathbf{6}$.

$\mathbf{ires}=3$

Indicates to the integrator that the current time step should be abandoned and a smaller time step used instead. You may wish to set $\mathbf{ires}=3$ when a physically meaningless input or output value has been generated. If you consecutively set $\mathbf{ires}=3$, d03pkf returns to the calling subroutine with the error indicator set to $\mathbf{ifail}=\mathbf{4}$.

odedef must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d03pkf is called. Arguments denoted as Input must not be changed by this procedure.

Note: odedef should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d03pkf. If your code inadvertently does return any NaNs or infinities, d03pkf is likely to produce unexpected results.

12: $\mathbf{nxi}$ – Integer Input

On entry: the number of ODE/PDE coupling points.

Constraints:

• if $\mathbf{nv}=0$, $\mathbf{nxi}=0$;
• if $\mathbf{nv}>0$, $\mathbf{nxi}\ge 0$.

13: $\mathbf{xi}\left(\mathbf{nxi}\right)$ – Real (Kind=nag_wp) array Input

On entry: $\mathbf{xi}\left(\mathit{i}\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{nxi}$, must be set to the ODE/PDE coupling points, ${\xi }_{\mathit{i}}$.

Constraint: $\mathbf{x}\left(1\right)\le \mathbf{xi}\left(1\right)<\mathbf{xi}\left(2\right)<\cdots <\mathbf{xi}\left(\mathbf{nxi}\right)\le \mathbf{x}\left(\mathbf{npts}\right)$.

14: $\mathbf{neqn}$ – Integer Input

On entry: the number of ODEs in the time direction.

Constraint: $\mathbf{neqn}=\mathbf{npde}\times \mathbf{npts}+\mathbf{nv}$.

15: $\mathbf{rtol}\left(*\right)$ – Real (Kind=nag_wp) array Input

Note: the dimension of the array rtol must be at least $1$ if $\mathbf{itol}=1$ or $2$ and at least $\mathbf{neqn}$ if $\mathbf{itol}=3$ or $4$.

On entry: the relative local error tolerance.

Constraint: $\mathbf{rtol}\left(i\right)\ge 0.0$ for all relevant $i$.

16: $\mathbf{atol}\left(*\right)$ – Real (Kind=nag_wp) array Input

Note: the dimension of the array atol must be at least $1$ if $\mathbf{itol}=1$ or $3$ and at least $\mathbf{neqn}$ if $\mathbf{itol}=2$ or $4$.

On entry: the absolute local error tolerance.

Constraint: $\mathbf{atol}\left(i\right)\ge 0.0$ for all relevant $i$.

Note: corresponding elements of rtol and atol cannot both be $0.0$.

17: $\mathbf{itol}$ – Integer Input

On entry: a value to indicate the form of the local error test. itol indicates to d03pkf whether to interpret either or both of rtol or atol as a vector or scalar. The error test to be satisfied is $\Vert e_i/w_i\Vert <1.0$, where $w_i$ is defined as follows:

itol	rtol	atol	${\mathit{w}}_{\mathit{i}}$
1	scalar	scalar	$\mathbf{rtol}\left(1\right)\times \left|\mathbf{u}\left(i\right)\right|+\mathbf{atol}\left(1\right)$
2	scalar	vector	$\mathbf{rtol}\left(1\right)\times \left|\mathbf{u}\left(i\right)\right|+\mathbf{atol}\left(i\right)$
3	vector	scalar	$\mathbf{rtol}\left(i\right)\times \left|\mathbf{u}\left(i\right)\right|+\mathbf{atol}\left(1\right)$
4	vector	vector	$\mathbf{rtol}\left(i\right)\times \left|\mathbf{u}\left(i\right)\right|+\mathbf{atol}\left(i\right)$

In the above, $e_{\mathit{i}}$ denotes the estimated local error for the $\mathit{i}$th component of the coupled PDE/ODE system in time, $\mathbf{u}\left(\mathit{i}\right)$, for $\mathit{i}=1,2,\dots ,\mathbf{neqn}$.

The choice of norm used is defined by the argument norm.

Constraint: $1\le \mathbf{itol}\le 4$.

18: $\mathbf{norm}$ – Character(1) Input

On entry: the type of norm to be used.

$\mathbf{norm}=\text{'M'}$

Maximum norm.

$\mathbf{norm}=\text{'A'}$

Averaged $L_2$ norm.

If ${\mathbf{u}}_{\mathrm{norm}}$ denotes the norm of the vector u of length neqn, then for the averaged $L_2$ norm

$${\mathbf{u}}_{\mathrm{norm}}=\sqrt{\frac{1}{\mathbf{neqn}}\sum _{i=1}^{\mathbf{neqn}}{(\mathbf{u}\left(i\right)/w_i)}^2}\text{,}$$

while for the maximum norm

$${\mathbf{u}}_{\mathrm{norm}}=\underset{i}{\max }|\mathbf{u}\left(i\right)/w_i|\text{.}$$

See the description of itol for the formulation of the weight vector $w$.

Constraint: $\mathbf{norm}=\text{'M'}$ or $\text{'A'}$.

19: $\mathbf{laopt}$ – Character(1) Input

On entry: the type of matrix algebra required.

$\mathbf{laopt}=\text{'F'}$

Full matrix methods to be used.

$\mathbf{laopt}=\text{'B'}$

Banded matrix methods to be used.

$\mathbf{laopt}=\text{'S'}$

Sparse matrix methods to be used.

Constraint: $\mathbf{laopt}=\text{'F'}$, $\text{'B'}$ or $\text{'S'}$.

Note: you are recommended to use the banded option when no coupled ODEs are present (i.e., $\mathbf{nv}=0$).

20: $\mathbf{algopt}\left(30\right)$ – Real (Kind=nag_wp) array Input

On entry: may be set to control various options available in the integrator. If you wish to employ all the default options, $\mathbf{algopt}\left(1\right)$ should be set to $0.0$. Default values will also be used for any other elements of algopt set to zero. The permissible values, default values, and meanings are as follows:

$\mathbf{algopt}\left(1\right)$

Selects the ODE integration method to be used. If $\mathbf{algopt}\left(1\right)=1.0$, a BDF method is used and if $\mathbf{algopt}\left(1\right)=2.0$, a Theta method is used. The default value is $\mathbf{algopt}\left(1\right)=1.0$.

If $\mathbf{algopt}\left(1\right)=2.0$, then $\mathbf{algopt}\left(\mathit{i}\right)$, for $\mathit{i}=2,3,4$, are not used.

$\mathbf{algopt}\left(2\right)$

Specifies the maximum order of the BDF integration formula to be used. $\mathbf{algopt}\left(2\right)$ may be $1.0$, $2.0$, $3.0$, $4.0$ or $5.0$. The default value is $\mathbf{algopt}\left(2\right)=5.0$.

$\mathbf{algopt}\left(3\right)$

Specifies what method is to be used to solve the system of nonlinear equations arising on each step of the BDF method. If $\mathbf{algopt}\left(3\right)=1.0$ a modified Newton iteration is used and if $\mathbf{algopt}\left(3\right)=2.0$ a functional iteration method is used. If functional iteration is selected and the integrator encounters difficulty, there is an automatic switch to the modified Newton iteration. The default value is $\mathbf{algopt}\left(3\right)=1.0$.

$\mathbf{algopt}\left(4\right)$

Specifies whether or not the Petzold error test is to be employed. The Petzold error test results in extra overhead but is more suitable when algebraic equations are present, such as $P_{i,\mathit{j}}=0.0$, for $\mathit{j}=1,2,\dots ,\mathbf{npde}$, for some $i$ or when there is no ${\stackrel{.}{V}}_i\left(t\right)$ dependence in the coupled ODE system. If $\mathbf{algopt}\left(4\right)=1.0$, the Petzold test is used. If $\mathbf{algopt}\left(4\right)=2.0$, the Petzold test is not used. The default value is $\mathbf{algopt}\left(4\right)=1.0$.

If $\mathbf{algopt}\left(1\right)=1.0$, $\mathbf{algopt}\left(\mathit{i}\right)$, for $\mathit{i}=5,6,7$, are not used.

$\mathbf{algopt}\left(5\right)$

Specifies the value of Theta to be used in the Theta integration method. $0.51\le \mathbf{algopt}\left(5\right)\le 0.99$. The default value is $\mathbf{algopt}\left(5\right)=0.55$.

$\mathbf{algopt}\left(6\right)$

Specifies what method is to be used to solve the system of nonlinear equations arising on each step of the Theta method. If $\mathbf{algopt}\left(6\right)=1.0$, a modified Newton iteration is used and if $\mathbf{algopt}\left(6\right)=2.0$, a functional iteration method is used. The default value is $\mathbf{algopt}\left(6\right)=1.0$.

$\mathbf{algopt}\left(7\right)$

Specifies whether or not the integrator is allowed to switch automatically between modified Newton and functional iteration methods in order to be more efficient. If $\mathbf{algopt}\left(7\right)=1.0$, switching is allowed and if $\mathbf{algopt}\left(7\right)=2.0$, switching is not allowed. The default value is $\mathbf{algopt}\left(7\right)=1.0$.

$\mathbf{algopt}\left(11\right)$

Specifies a point in the time direction, $t_{\mathrm{crit}}$, beyond which integration must not be attempted. The use of $t_{\mathrm{crit}}$ is described under the argument itask. If $\mathbf{algopt}\left(1\right)\ne 0.0$, a value of $0.0$, for $\mathbf{algopt}\left(11\right)$, say, should be specified even if itask subsequently specifies that $t_{\mathrm{crit}}$ will not be used.

$\mathbf{algopt}\left(12\right)$

Specifies the minimum absolute step size to be allowed in the time integration. If this option is not required, $\mathbf{algopt}\left(12\right)$ should be set to $0.0$.

$\mathbf{algopt}\left(13\right)$

Specifies the maximum absolute step size to be allowed in the time integration. If this option is not required, $\mathbf{algopt}\left(13\right)$ should be set to $0.0$.

$\mathbf{algopt}\left(14\right)$

Specifies the initial step size to be attempted by the integrator. If $\mathbf{algopt}\left(14\right)=0.0$, the initial step size is calculated internally.

$\mathbf{algopt}\left(15\right)$

Specifies the maximum number of steps to be attempted by the integrator in any one call. If $\mathbf{algopt}\left(15\right)=0.0$, no limit is imposed.

$\mathbf{algopt}\left(23\right)$

Specifies what method is to be used to solve the nonlinear equations at the initial point to initialize the values of $U$, $U_t$, $V$ and $\stackrel{.}{V}$. If $\mathbf{algopt}\left(23\right)=1.0$, a modified Newton iteration is used and if $\mathbf{algopt}\left(23\right)=2.0$, functional iteration is used. The default value is $\mathbf{algopt}\left(23\right)=1.0$.

$\mathbf{algopt}\left(29\right)$ and $\mathbf{algopt}\left(30\right)$ are used only for the sparse matrix algebra option, i.e., $\mathbf{laopt}=\text{'S'}$.

$\mathbf{algopt}\left(29\right)$

Governs the choice of pivots during the decomposition of the first Jacobian matrix. It should lie in the range $0.0<\mathbf{algopt}\left(29\right)<1.0$, with smaller values biasing the algorithm towards maintaining sparsity at the expense of numerical stability. If $\mathbf{algopt}\left(29\right)$ lies outside this range then the default value is used. If the routines regard the Jacobian matrix as numerically singular then increasing $\mathbf{algopt}\left(29\right)$ towards $1.0$ may help, but at the cost of increased fill-in. The default value is $\mathbf{algopt}\left(29\right)=0.1$.

$\mathbf{algopt}\left(30\right)$

Used as a relative pivot threshold during subsequent Jacobian decompositions (see $\mathbf{algopt}\left(29\right)$) below which an internal error is invoked. $\mathbf{algopt}\left(30\right)$ must be greater than zero, otherwise the default value is used. If $\mathbf{algopt}\left(30\right)$ is greater than $1.0$ no check is made on the pivot size, and this may be a necessary option if the Jacobian is found to be numerically singular (see $\mathbf{algopt}\left(29\right)$). The default value is $\mathbf{algopt}\left(30\right)=0.0001$.

21: $\mathbf{rsave}\left(\mathbf{lrsave}\right)$ – Real (Kind=nag_wp) array Communication Array

If $\mathbf{ind}=0$, rsave need not be set on entry.

If $\mathbf{ind}=1$, rsave must be unchanged from the previous call to the routine because it contains required information about the iteration.

22: $\mathbf{lrsave}$ – Integer Input

On entry: the dimension of the array rsave as declared in the (sub)program from which d03pkf is called. Its size depends on the type of matrix algebra selected.

If $\mathbf{laopt}=\text{'F'}$, $\mathbf{lrsave}\ge \mathbf{neqn}\times \mathbf{neqn}+\mathbf{neqn}+\mathit{nwkres}+\mathit{lenode}$.

If $\mathbf{laopt}=\text{'B'}$, $\mathbf{lrsave}\ge (2\mathit{ml}+\mathit{mu}+2)\times \mathbf{neqn}+\mathit{nwkres}+\mathit{lenode}$.

If $\mathbf{laopt}=\text{'S'}$, $\mathbf{lrsave}\ge 4\mathbf{neqn}+11\mathbf{neqn}/2+1+\mathit{nwkres}+\mathit{lenode}$.

Where $\mathit{ml}$ and $\mathit{mu}$ are the lower and upper half bandwidths given by $\mathit{ml}=\mathbf{npde}+\mathbf{nleft}-1$ such that

for problems involving PDEs only,

$\mathit{mu}=2\mathbf{npde}-\mathbf{nleft}-1\text{;}$

for coupled PDE/ODE problems,

$\mathit{ml}=\mathit{mu}=\mathbf{neqn}-1\text{.}$

Where $\mathit{nwkres}$ is defined by

if $\mathbf{nv}>0\text{ and }\mathbf{nxi}>0$,

$\mathit{nwkres}=\mathbf{npde}(3\mathbf{npde}+6\mathbf{nxi}+\mathbf{npts}+15)+\mathbf{nxi}+\mathbf{nv}+7\mathbf{npts}+2\text{;}$

if $\mathbf{nv}>0\text{ and }\mathbf{nxi}=0$,

$\mathit{nwkres}=\mathbf{npde}(3\mathbf{npde}+\mathbf{npts}+21)+\mathbf{nv}+7\mathbf{npts}+3\text{;}$

if $\mathbf{nv}=0$,

$\mathit{nwkres}=\mathbf{npde}(3\mathbf{npde}+\mathbf{npts}+21)+7\mathbf{npts}+4\text{.}$

Where $\mathit{lenode}$ is defined by

if the BDF method is used,

$\mathit{lenode}=(6+\mathrm{int}\left(\mathbf{algopt}\left(2\right)\right))\times \mathbf{neqn}+50\text{;}$

if the Theta method is used,

$\mathit{lenode}=9\mathbf{neqn}+50\text{.}$

Note: when using the sparse option, the value of lrsave may be too small when supplied to the integrator. An estimate of the minimum size of lrsave is printed on the current error message unit if $\mathbf{itrace}>0$ and the routine returns with $\mathbf{ifail}=\mathbf{15}$.

23: $\mathbf{isave}\left(\mathbf{lisave}\right)$ – Integer array Communication Array

If $\mathbf{ind}=0$, isave need not be set.

If $\mathbf{ind}=1$, isave must be unchanged from the previous call to the routine because it contains required information about the iteration. In particular the following components of the array isave concern the efficiency of the integration:

$\mathbf{isave}\left(1\right)$

Contains the number of steps taken in time.

$\mathbf{isave}\left(2\right)$

Contains the number of residual evaluations of the resulting ODE system used. One such evaluation involves evaluating the PDE functions at all the mesh points, as well as one evaluation of the functions in the boundary conditions.

$\mathbf{isave}\left(3\right)$

Contains the number of Jacobian evaluations performed by the time integrator.

$\mathbf{isave}\left(4\right)$

Contains the order of the ODE method last used in the time integration.

$\mathbf{isave}\left(5\right)$

Contains the number of Newton iterations performed by the time integrator. Each iteration involves residual evaluation of the resulting ODE system followed by a back-substitution using the $LU$ decomposition of the Jacobian matrix.

24: $\mathbf{lisave}$ – Integer Input

On entry: the dimension of the array isave as declared in the (sub)program from which d03pkf is called. Its size depends on the type of matrix algebra selected:

• if $\mathbf{laopt}=\text{'F'}$, $\mathbf{lisave}\ge 24$;
• if $\mathbf{laopt}=\text{'B'}$, $\mathbf{lisave}\ge \mathbf{neqn}+24$;
• if $\mathbf{laopt}=\text{'S'}$, $\mathbf{lisave}\ge 25\times \mathbf{neqn}+24$.

Note: when using the sparse option, the value of lisave may be too small when supplied to the integrator. An estimate of the minimum size of lisave is printed on the current error message unit if $\mathbf{itrace}>0$ and the routine returns with $\mathbf{ifail}=\mathbf{15}$.

25: $\mathbf{itask}$ – Integer Input

On entry: the task to be performed by the ODE integrator.

$\mathbf{itask}=1$

Normal computation of output values u at $t=\mathbf{tout}$ (by overshooting and interpolating).

$\mathbf{itask}=2$

Take one step in the time direction and return.

$\mathbf{itask}=3$

Stop at first internal integration point at or beyond $t=\mathbf{tout}$.

$\mathbf{itask}=4$

Normal computation of output values u at $t=\mathbf{tout}$ but without overshooting $t=t_{\mathrm{crit}}$ where $t_{\mathrm{crit}}$ is described under the argument algopt.

$\mathbf{itask}=5$

Take one step in the time direction and return, without passing $t_{\mathrm{crit}}$, where $t_{\mathrm{crit}}$ is described under the argument algopt.

Constraint: $\mathbf{itask}=1$, $2$, $3$, $4$ or $5$.

26: $\mathbf{itrace}$ – Integer Input

On entry: the level of trace information required from d03pkf and the underlying ODE solver as follows:

$\mathbf{itrace}\le \mathrm{-1}$

No output is generated.

$\mathbf{itrace}=0$

Only warning messages from the PDE solver are printed on the current error message unit (see x04aaf).

$\mathbf{itrace}=1$

Output from the underlying ODE solver is printed on the current advisory message unit (see x04abf). This output contains details of Jacobian entries, the nonlinear iteration and the time integration during the computation of the ODE system.

$\mathbf{itrace}=2$

Output from the underlying ODE solver is similar to that produced when $\mathbf{itrace}=1$, except that the advisory messages are given in greater detail.

$\mathbf{itrace}\ge 3$

Output from the underlying ODE solver is similar to that produced when $\mathbf{itrace}=2$, except that the advisory messages are given in greater detail.

You advised to set $\mathbf{itrace}=0$, unless you are experienced with Sub-chapter D02M–N.

27: $\mathbf{ind}$ – Integer Input/Output

On entry: indicates whether this is a continuation call or a new integration.

$\mathbf{ind}=0$

Starts or restarts the integration in time.

$\mathbf{ind}=1$

Continues the integration after an earlier exit from the routine. In this case, only the arguments tout and ifail should be reset between calls to d03pkf.

Constraint: $\mathbf{ind}=0$ or $1$.

On exit: $\mathbf{ind}=1$.

28: $\mathbf{ifail}$ – Integer Input/Output

On entry: ifail must be set to $0$, $\mathrm{-1}$ or $1$ to set behaviour on detection of an error; these values have no effect when no error is detected.

A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $\mathrm{-1}$ means that an error message is printed while a value of $1$ means that it is not.

If halting is not appropriate, the value $\mathrm{-1}$ or $1$ is recommended. If message printing is undesirable, then the value $1$ is recommended. Otherwise, the value $0$ is recommended. When the value $-\mathbf{1}$ or $\mathbf{1}$ is used it is essential to test the value of ifail on exit.

On exit: $\mathbf{ifail}=\mathbf{0}$ unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

$\mathbf{ifail}=1$

On entry, at least one point in xi lies outside $[\mathbf{x}\left(1\right),\mathbf{x}\left(\mathbf{npts}\right)]$: $\mathbf{x}\left(1\right)=⟨\mathit{\text{value}}⟩$ and $\mathbf{x}\left(\mathbf{npts}\right)=⟨\mathit{\text{value}}⟩$.

On entry, $\mathit{i}=⟨\mathit{\text{value}}⟩$, $\mathbf{x}\left(\mathit{i}\right)=⟨\mathit{\text{value}}⟩$, $\mathit{j}=⟨\mathit{\text{value}}⟩$ and $\mathbf{x}\left(\mathit{j}\right)=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{x}\left(1\right)<\mathbf{x}\left(2\right)<\cdots <\mathbf{x}\left(\mathbf{npts}\right)$.

On entry, $\mathit{i}=⟨\mathit{\text{value}}⟩$, $\mathbf{xi}\left(\mathit{i}+1\right)=⟨\mathit{\text{value}}⟩$ and $\mathbf{xi}\left(\mathit{i}\right)=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{xi}\left(\mathit{i}+1\right)>\mathbf{xi}\left(\mathit{i}\right)$.

On entry, $\mathit{i}=⟨\mathit{\text{value}}⟩$ and $\mathbf{atol}\left(\mathit{i}\right)=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{atol}\left(\mathit{i}\right)\ge 0.0$.

On entry, $\mathit{i}=⟨\mathit{\text{value}}⟩$ and $\mathit{j}=⟨\mathit{\text{value}}⟩$.
Constraint: corresponding elements $\mathbf{atol}\left(\mathit{i}\right)$ and $\mathbf{rtol}\left(\mathit{j}\right)$ cannot both be $0.0$.

On entry, $\mathit{i}=⟨\mathit{\text{value}}⟩$ and $\mathbf{rtol}\left(\mathit{i}\right)=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{rtol}\left(\mathit{i}\right)\ge 0.0$.

On entry, $\mathbf{ind}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{ind}=0$ or $1$.

On entry, $\mathbf{itask}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{itask}=1$, $2$, $3$, $4$ or $5$.

On entry, $\mathbf{itol}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{itol}=1$, $2$, $3$ or $4$.

On entry, $\mathbf{laopt}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{laopt}=\text{'F'}$, $\text{'B'}$ or $\text{'S'}$.

On entry, $\mathbf{lisave}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{lisave}\ge ⟨\mathit{\text{value}}⟩$.

On entry, $\mathbf{lrsave}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{lrsave}\ge ⟨\mathit{\text{value}}⟩$.

On entry, $\mathbf{neqn}=⟨\mathit{\text{value}}⟩$, $\mathbf{npde}=⟨\mathit{\text{value}}⟩$, $\mathbf{npts}=⟨\mathit{\text{value}}⟩$ and $\mathbf{nv}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{neqn}=\mathbf{npde}\times \mathbf{npts}+\mathbf{nv}$.

On entry, $\mathbf{nleft}=⟨\mathit{\text{value}}⟩$, $\mathbf{npde}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{nleft}\le \mathbf{npde}$.

On entry, $\mathbf{nleft}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{nleft}\ge 0$.

On entry, $\mathbf{norm}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{norm}=\text{'A'}$ or $\text{'M'}$.

On entry, $\mathbf{npde}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{npde}\ge 1$.

On entry, $\mathbf{npts}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{npts}\ge 3$.

On entry, $\mathbf{nv}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{nv}\ge 0$.

On entry, $\mathbf{nv}=⟨\mathit{\text{value}}⟩$ and $\mathbf{nxi}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{nxi}=0$ when $\mathbf{nv}=0$.

On entry, $\mathbf{nv}=⟨\mathit{\text{value}}⟩$ and $\mathbf{nxi}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{nxi}\ge 0$ when $\mathbf{nv}>0$.

On entry, on initial entry $\mathbf{ind}=1$.
Constraint: on initial entry $\mathbf{ind}=0$.

On entry, $\mathbf{tout}=⟨\mathit{\text{value}}⟩$ and $\mathbf{ts}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{tout}>\mathbf{ts}$.

On entry, $\mathbf{tout}-\mathbf{ts}$ is too small: $\mathbf{tout}=⟨\mathit{\text{value}}⟩$ and $\mathbf{ts}=⟨\mathit{\text{value}}⟩$.

$\mathbf{ifail}=2$

Underlying ODE solver cannot make further progress from the point ts with the supplied values of atol and rtol. $\mathbf{ts}=⟨\mathit{\text{value}}⟩$.

$\mathbf{ifail}=3$

Repeated errors in an attempted step of underlying ODE solver. Integration was successful as far as ts: $\mathbf{ts}=⟨\mathit{\text{value}}⟩$.

In the underlying ODE solver, there were repeated error test failures on an attempted step, before completing the requested task, but the integration was successful as far as $t=\mathbf{ts}$. The problem may have a singularity, or the error requirement may be inappropriate. Incorrect positioning of boundary conditions may also result in this error.

$\mathbf{ifail}=4$

In setting up the ODE system an internal auxiliary was unable to initialize the derivative. This could be due to your setting $\mathbf{ires}=3$ in pdedef or bndary.

$\mathbf{ifail}=5$

Singular Jacobian of ODE system. Check problem formulation.

$\mathbf{ifail}=6$

In evaluating residual of ODE system, $\mathbf{ires}=2$ has been set in pdedef, bndary, or odedef. Integration is successful as far as ts: $\mathbf{ts}=⟨\mathit{\text{value}}⟩$.

$\mathbf{ifail}=7$

atol and rtol were too small to start integration.

$\mathbf{ifail}=8$

ires set to an invalid value in call to pdedef, bndary, or odedef.

$\mathbf{ifail}=9$

Serious error in internal call to an auxiliary. Increase itrace for further details.

$\mathbf{ifail}=10$

Integration completed, but small changes in atol or rtol are unlikely to result in a changed solution.

The required task has been completed, but it is estimated that a small change in atol and rtol is unlikely to produce any change in the computed solution. (Only applies when you are not operating in one step mode, that is when $\mathbf{itask}\ne 2$ or $5$.)

$\mathbf{ifail}=11$

Error during Jacobian formulation for ODE system. Increase itrace for further details.

$\mathbf{ifail}=12$

In solving ODE system, the maximum number of steps $\mathbf{algopt}\left(15\right)$ has been exceeded. $\mathbf{algopt}\left(15\right)=⟨\mathit{\text{value}}⟩$.

$\mathbf{ifail}=13$

Zero error weights encountered during time integration.

Some error weights $w_i$ became zero during the time integration (see the description of itol). Pure relative error control $(\mathbf{atol}\left(i\right)=0.0)$ was requested on a variable (the $i$th) which has become zero. The integration was successful as far as $t=\mathbf{ts}$.

$\mathbf{ifail}=15$

When using the sparse option lisave or lrsave is too small: $\mathbf{lisave}=⟨\mathit{\text{value}}⟩$, $\mathbf{lrsave}=⟨\mathit{\text{value}}⟩$.

$\mathbf{ifail}=-99$

An unexpected error has been triggered by this routine. Please contact NAG.

See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$\mathbf{ifail}=-399$

Your licence key may have expired or may not have been installed correctly.

See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$\mathbf{ifail}=-999$

Dynamic memory allocation failed.

See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results