NAG CL Interface
c09fyc (dim3_​coeff_​ext)

Settings help

CL Name Style:


1 Purpose

c09fyc extracts a selected set of discrete wavelet transform (DWT) coefficients from the full set of coefficients stored in compact form, as computed by c09fac (single level three-dimensional DWT) or c09fcc (multi-level three-dimensional DWT).

2 Specification

#include <nag.h>
void  c09fyc (Integer ilev, Integer cindex, Integer lenc, const double c[], double d[], Integer ldd, Integer sdd, Integer icomm[], NagError *fail)
The function may be called by the names: c09fyc, nag_wav_dim3_coeff_ext or nag_wav_3d_coeff_ext.

3 Description

c09fyc is intended to be used after a call to either c09fac (single level three-dimensional DWT) or c09fcc (multi-level three-dimensional DWT), either of which must be preceded by a call to c09acc (three-dimensional wavelet filter initialization). Given an initial three-dimensional data set A, a prior call to c09fac or c09fcc computes the approximation coefficients (at the highest requested level in the case of c09fcc) and seven sets of detail coefficients (at all levels in the case of c09fcc) and stores these in compact form in a one-dimensional array c. c09fyc can then extract either the approximation coefficients or one of the sets of detail coefficients (at one of the levels following c09fcc) into a three-dimensional data set stored in d.
If a multi-level DWT was performed by a prior call to c09fcc then the dimensions of the three-dimensional data stored in d depend on the level extracted and are available from the arrays dwtlvm, dwtlvn and dwtlvfr as returned by c09fcc which contain the first, second and third dimensions respectively.
If a single level DWT was performed by a prior call to c09fac then the dimensions of the three-dimensional data stored in d can be determined from nwct, nwcn and nwcfr as returned by the setup function c09acc.
See Section 2.1 in the C09 Chapter Introduction for a discussion of the three-dimensional DWT.

4 References

None.

5 Arguments

Note: the following notation is used in this section:
1: ilev Integer Input
On entry: the level at which coefficients are to be extracted.
If ilev=0, it is assumed that the coefficient array c was produced by a preceding call to the single level function c09fac.
If ilev>0, it is assumed that the coefficient array c was produced by a preceding call to the multi-level function c09fcc.
Constraints:
  • ilev=0 (following a call to c09fac);
  • 0ilevnwl, where nwl is as used in a preceding call to c09fcc;
  • if cindex=0, ilev=nwl (following a call to c09fcc).
2: cindex Integer Input
On entry: identifies which coefficients to extract. The coefficients are identified as follows:
cindex=0
The approximation coefficients, produced by application of the low pass filter over columns, rows and frames of A (LLL). After a call to the multi-level transform function c09fcc (which implies that ilev>0) the approximation coefficients are available only for ilev=nwl, where nwl is the value used in a preceding call to c09fcc.
cindex=1
The detail coefficients produced by applying the low pass filter over columns and rows of A and the high pass filter over frames (LLH).
cindex=2
The detail coefficients produced by applying the low pass filter over columns, high pass filter over rows and low pass filter over frames of A (LHL).
cindex=3
The detail coefficients produced by applying the low pass filter over columns of A and high pass filter over rows and frames (LHH).
cindex=4
The detail coefficients produced by applying the high pass filter over columns of A and low pass filter over rows and frames (HLL).
cindex=5
The detail coefficients produced by applying the high pass filter over columns, low pass filter over rows and high pass filter over frames of A (HLH).
cindex=6
The detail coefficients produced by applying the high pass filter over columns and rows of A and the low pass filter over frames (HHL).
cindex=7
The detail coefficients produced by applying the high pass filter over columns, rows and frames of A (HHH).
Constraints:
  • if ilev=0, 0cindex7;
  • if ilev=nwl, following a call to c09fcc transforming nwl levels, 0cindex7;
  • otherwise 1cindex7.
3: lenc Integer Input
On entry: the dimension of the array c.
Constraint: lenc must be unchanged from the value used in the preceding call to either c09fac or c09fcc.
4: c[lenc] const double Input
On entry: DWT coefficients, as computed by c09fac or c09fcc.
5: d[dim] double Output
Note: the dimension, dim, of the array d must be at least ldd×sdd×ncfr.
On exit: the requested coefficients.
If the DWT coefficients were computed by c09fac then
  • if cindex=0, the approximation coefficients are stored in d[(k-1)×ldd×sdd+(j-1)×ldd+i-1], for i=1,2,,ncm, j=1,2,,ncn and k=1,2,,ncfr;
  • if 1cindex7, the detail coefficients, as indicated by cindex, are stored in d[(k-1)×ldd×sdd+(j-1)×ldd+i-1], for i=1,2,,ncm, j=1,2,,ncn and k=1,2,,ncfr.
If the DWT coefficients were computed by c09fcc then
  • if cindex=0 and ilev=nwl, the approximation coefficients are stored in d[(k-1)×ldd×sdd+(j-1)×ldd+i-1], for i=1,2,,ncm, j=1,2,,ncn and k=1,2,,ncfr;
  • if 1cindex7, the detail coefficients, as indicated by cindex, for level ilev are stored in d[(k-1)×ldd×sdd+(j-1)×ldd+i-1], for i=1,2,,ncm, j=1,2,,ncn and k=1,2,,ncfr.
6: ldd Integer Input
On entry: the stride separating row elements of each of the sets of frame coefficients in the three-dimensional data stored in d.
Constraint: lddncm.
7: sdd Integer Input
On entry: the stride separating corresponding coefficients of consecutive frames in the three-dimensional data stored in d.
Constraint: sddncn.
8: icomm[260] Integer Communication Array
On entry: contains details of the discrete wavelet transform and the problem dimension as setup in the call to the initialization function c09acc.
9: fail NagError * Input/Output
The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).

6 Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_INITIALIZATION
Either the initialization function has not been called first or icomm has been corrupted.
NE_INT
On entry, cindex=value.
Constraint: cindex7.
On entry, cindex=value.
Constraint: cindex0.
On entry, ilev=value.
Constraint: ilev=0 following a call to the single level function c09fac.
On entry, ilev=value.
Constraint: ilev>0 following a call to the multi-level function c09fcc.
NE_INT_2
On entry, ilev=value and nwl=value.
Constraint: ilevnwl, where nwl is the number of levels used in the call to c09fcc.
On entry, ldd=value and ncm=value.
Constraint: lddncm, where ncm is the number of DWT coefficients in the first dimension following the single level transform.
On entry, lenc=value and nct=value.
Constraint: lencnct, where nct is the number of DWT coefficients computed in the preceding call to c09fac.
On entry, lenc=value and nct=value.
Constraint: lencnct, where nct is the number of DWT coefficients computed in the preceding call to c09fcc.
On entry, sdd=value and ncn=value.
Constraint: sddncn, where ncn is the number of DWT coefficients in the second dimension following the single level transform.
NE_INT_3
On entry, ilev=value and nwl=value, but cindex=0.
Constraint: cindex>0 when ilev<nwl in the preceding call to c09fcc.
On entry, ldd=value and ncm=value.
Constraint: lddncm, where ncm is the number of DWT coefficients in the first dimension at the selected level ilev.
On entry, sdd=value and ncn=value.
Constraint: sddncn, where ncn is the number of DWT coefficients in the second dimension at the selected level ilev.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 7.5 in the Introduction to the NAG Library CL Interface for further information.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library CL Interface for further information.

7 Accuracy

Not applicable.

8 Parallelism and Performance

c09fyc is not threaded in any implementation.

9 Further Comments

None.

10 Example

See Section 10 in c09acc, c09fac, c09fcc and c09fzc.