NAG FL Interface
s30cdf (opt_​binary_​aon_​greeks)

1 Purpose

s30cdf computes the price of a binary or digital asset-or-nothing option together with its sensitivities (Greeks).

2 Specification

Fortran Interface
Subroutine s30cdf ( calput, m, n, x, s, t, sigma, r, q, p, ldp, delta, gamma, vega, theta, rho, crho, vanna, charm, speed, colour, zomma, vomma, ifail)
Integer, Intent (In) :: m, n, ldp
Integer, Intent (Inout) :: ifail
Real (Kind=nag_wp), Intent (In) :: x(m), s, t(n), sigma, r, q
Real (Kind=nag_wp), Intent (Inout) :: p(ldp,n), delta(ldp,n), gamma(ldp,n), vega(ldp,n), theta(ldp,n), rho(ldp,n), crho(ldp,n), vanna(ldp,n), charm(ldp,n), speed(ldp,n), colour(ldp,n), zomma(ldp,n), vomma(ldp,n)
Character (1), Intent (In) :: calput
C Header Interface
#include <nag.h>
void  s30cdf_ (const char *calput, const Integer *m, const Integer *n, const double x[], const double *s, const double t[], const double *sigma, const double *r, const double *q, double p[], const Integer *ldp, double delta[], double gamma[], double vega[], double theta[], double rho[], double crho[], double vanna[], double charm[], double speed[], double colour[], double zomma[], double vomma[], Integer *ifail, const Charlen length_calput)
The routine may be called by the names s30cdf or nagf_specfun_opt_binary_aon_greeks.

3 Description

s30cdf computes the price of a binary or digital asset-or-nothing option, together with the Greeks or sensitivities, which are the partial derivatives of the option price with respect to certain of the other input parameters. This option pays the underlying asset itself, S, at expiration if the option is in-the-money (see Section 2.4 in the S Chapter Introduction). For a strike price, X, underlying asset price, S, and time to expiry, T, the payoff is therefore S, if S>X for a call or S<X for a put. Nothing is paid out when this condition is not met.
The price of a call with volatility, σ, risk-free interest rate, r, and annualised dividend yield, q, is
Pcall = S e-qT Φd1  
and for a put,
Pput = S e-qT Φ-d1  
where Φ is the cumulative Normal distribution function,
Φx = 1 2π - x exp -y2/2 dy ,  
and
d1 = ln S/X + r-q + σ2 / 2 T σT .  
The option price Pij=PX=Xi,T=Tj is computed for each strike price in a set Xi, i=1,2,,m, and for each expiry time in a set Tj, j=1,2,,n.

4 References

Reiner E and Rubinstein M (1991) Unscrambling the binary code Risk 4

5 Arguments

1: calput Character(1) Input
On entry: determines whether the option is a call or a put.
calput='C'
A call; the holder has a right to buy.
calput='P'
A put; the holder has a right to sell.
Constraint: calput='C' or 'P'.
2: m Integer Input
On entry: the number of strike prices to be used.
Constraint: m1.
3: n Integer Input
On entry: the number of times to expiry to be used.
Constraint: n1.
4: xm Real (Kind=nag_wp) array Input
On entry: xi must contain Xi, the ith strike price, for i=1,2,,m.
Constraint: xiz ​ and ​ xi 1 / z , where z = x02amf , the safe range parameter, for i=1,2,,m.
5: s Real (Kind=nag_wp) Input
On entry: S, the price of the underlying asset.
Constraint: sz ​ and ​s1.0/z, where z=x02amf, the safe range parameter.
6: tn Real (Kind=nag_wp) array Input
On entry: ti must contain Ti, the ith time, in years, to expiry, for i=1,2,,n.
Constraint: tiz, where z = x02amf , the safe range parameter, for i=1,2,,n.
7: sigma Real (Kind=nag_wp) Input
On entry: σ, the volatility of the underlying asset. Note that a rate of 15% should be entered as 0.15.
Constraint: sigma>0.0.
8: r Real (Kind=nag_wp) Input
On entry: r, the annual risk-free interest rate, continuously compounded. Note that a rate of 5% should be entered as 0.05.
Constraint: r0.0.
9: q Real (Kind=nag_wp) Input
On entry: q, the annual continuous yield rate. Note that a rate of 8% should be entered as 0.08.
Constraint: q0.0.
10: pldpn Real (Kind=nag_wp) array Output
On exit: pij contains Pij, the option price evaluated for the strike price xi at expiry tj for i=1,2,,m and j=1,2,,n.
11: ldp Integer Input
On entry: the first dimension of the arrays p, delta, gamma, vega, theta, rho, crho, vanna, charm, speed, colour, zomma and vomma as declared in the (sub)program from which s30cdf is called.
Constraint: ldpm.
12: deltaldpn Real (Kind=nag_wp) array Output
On exit: the leading m×n part of the array delta contains the sensitivity, PS, of the option price to change in the price of the underlying asset.
13: gammaldpn Real (Kind=nag_wp) array Output
On exit: the leading m×n part of the array gamma contains the sensitivity, 2PS2, of delta to change in the price of the underlying asset.
14: vegaldpn Real (Kind=nag_wp) array Output
On exit: vegaij, contains the first-order Greek measuring the sensitivity of the option price Pij to change in the volatility of the underlying asset, i.e., Pij σ , for i=1,2,,m and j=1,2,,n.
15: thetaldpn Real (Kind=nag_wp) array Output
On exit: thetaij, contains the first-order Greek measuring the sensitivity of the option price Pij to change in time, i.e., - Pij T , for i=1,2,,m and j=1,2,,n, where b=r-q.
16: rholdpn Real (Kind=nag_wp) array Output
On exit: rhoij, contains the first-order Greek measuring the sensitivity of the option price Pij to change in the annual risk-free interest rate, i.e., - Pij r , for i=1,2,,m and j=1,2,,n.
17: crholdpn Real (Kind=nag_wp) array Output
On exit: crhoij, contains the first-order Greek measuring the sensitivity of the option price Pij to change in the annual cost of carry rate, i.e., - Pij b , for i=1,2,,m and j=1,2,,n, where b=r-q.
18: vannaldpn Real (Kind=nag_wp) array Output
On exit: vannaij, contains the second-order Greek measuring the sensitivity of the first-order Greek Δij to change in the volatility of the asset price, i.e., - Δij T = - 2 Pij Sσ , for i=1,2,,m and j=1,2,,n.
19: charmldpn Real (Kind=nag_wp) array Output
On exit: charmij, contains the second-order Greek measuring the sensitivity of the first-order Greek Δij to change in the time, i.e., - Δij T = - 2 Pij ST , for i=1,2,,m and j=1,2,,n.
20: speedldpn Real (Kind=nag_wp) array Output
On exit: speedij, contains the third-order Greek measuring the sensitivity of the second-order Greek Γij to change in the price of the underlying asset, i.e., - Γij S = - 3 Pij S3 , for i=1,2,,m and j=1,2,,n.
21: colourldpn Real (Kind=nag_wp) array Output
On exit: colourij, contains the third-order Greek measuring the sensitivity of the second-order Greek Γij to change in the time, i.e., - Γij T = - 3 Pij ST , for i=1,2,,m and j=1,2,,n.
22: zommaldpn Real (Kind=nag_wp) array Output
On exit: zommaij, contains the third-order Greek measuring the sensitivity of the second-order Greek Γij to change in the volatility of the underlying asset, i.e., - Γij σ = - 3 Pij S2σ , for i=1,2,,m and j=1,2,,n.
23: vommaldpn Real (Kind=nag_wp) array Output
On exit: vommaij, contains the second-order Greek measuring the sensitivity of the first-order Greek Δij to change in the volatility of the underlying asset, i.e., - Δij σ = - 2 Pij σ2 , for i=1,2,,m and j=1,2,,n.
24: ifail Integer Input/Output
On entry: ifail must be set to 0, -1 or 1 to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of 0 causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of -1 means that an error message is printed while a value of 1 means that it is not.
If halting is not appropriate, the value -1 or 1 is recommended. If message printing is undesirable, then the value 1 is recommended. Otherwise, the value 0 is recommended. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
On entry, calput=value was an illegal value.
ifail=2
On entry, m=value.
Constraint: m1.
ifail=3
On entry, n=value.
Constraint: n1.
ifail=4
On entry, xvalue=value.
Constraint: xivalue and xivalue.
ifail=5
On entry, s=value.
Constraint: svalue and svalue.
ifail=6
On entry, tvalue=value.
Constraint: tivalue.
ifail=7
On entry, sigma=value.
Constraint: sigma>0.0.
ifail=8
On entry, r=value.
Constraint: r0.0.
ifail=9
On entry, q=value.
Constraint: q0.0.
ifail=11
On entry, ldp=value and m=value.
Constraint: ldpm.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The accuracy of the output is dependent on the accuracy of the cumulative Normal distribution function, Φ. This is evaluated using a rational Chebyshev expansion, chosen so that the maximum relative error in the expansion is of the order of the machine precision (see s15abf and s15adf). An accuracy close to machine precision can generally be expected.

8 Parallelism and Performance

s30cdf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

None.

10 Example

This example computes the price of an asset-or-nothing put with a time to expiry of 292 days, a stock price of 70 and a strike price of 65. The risk-free interest rate is 5% per year, there is an annual dividend return of 3% and the volatility is 15% per year.

10.1 Program Text

Program Text (s30cdfe.f90)

10.2 Program Data

Program Data (s30cdfe.d)

10.3 Program Results

Program Results (s30cdfe.r)