NAG FL Interface
f01fff (complex_​herm_​matrix_​fun)

1 Purpose

f01fff computes the matrix function, fA, of a complex Hermitian n by n matrix A. fA must also be a complex Hermitian matrix.

2 Specification

Fortran Interface
Subroutine f01fff ( uplo, n, a, lda, f, iuser, ruser, iflag, ifail)
Integer, Intent (In) :: n, lda
Integer, Intent (Inout) :: iuser(*), ifail
Integer, Intent (Out) :: iflag
Real (Kind=nag_wp), Intent (Inout) :: ruser(*)
Complex (Kind=nag_wp), Intent (Inout) :: a(lda,*)
Character (1), Intent (In) :: uplo
External :: f
C Header Interface
#include <nag.h>
void  f01fff_ (const char *uplo, const Integer *n, Complex a[], const Integer *lda,
void (NAG_CALL *f)(Integer *iflag, const Integer *n, const double x[], double fx[], Integer iuser[], double ruser[]),
Integer iuser[], double ruser[], Integer *iflag, Integer *ifail, const Charlen length_uplo)
The routine may be called by the names f01fff or nagf_matop_complex_herm_matrix_fun.

3 Description

fA is computed using a spectral factorization of A
A = Q D QH ,  
where D is the real diagonal matrix whose diagonal elements, di, are the eigenvalues of A, Q is a unitary matrix whose columns are the eigenvectors of A and QH is the conjugate transpose of Q. fA is then given by
fA = Q fD QH ,  
where fD is the diagonal matrix whose ith diagonal element is fdi. See for example Section 4.5 of Higham (2008). fdi is assumed to be real.

4 References

Higham N J (2008) Functions of Matrices: Theory and Computation SIAM, Philadelphia, PA, USA

5 Arguments

1: uplo Character(1) Input
On entry: if uplo='U', the upper triangle of the matrix A is stored.
If uplo='L', the lower triangle of the matrix A is stored.
Constraint: uplo='U' or 'L'.
2: n Integer Input
On entry: n, the order of the matrix A.
Constraint: n0.
3: alda* Complex (Kind=nag_wp) array Input/Output
Note: the second dimension of the array a must be at least n.
On entry: the n by n Hermitian matrix A.
  • If uplo='U', the upper triangular part of A must be stored and the elements of the array below the diagonal are not referenced.
  • If uplo='L', the lower triangular part of A must be stored and the elements of the array above the diagonal are not referenced.
On exit: if ifail=0, the upper or lower triangular part of the n by n matrix function, fA.
4: lda Integer Input
On entry: the first dimension of the array a as declared in the (sub)program from which f01fff is called.
Constraint: ldamax1,n.
5: f Subroutine, supplied by the user. External Procedure
The subroutine f evaluates fzi at a number of points zi.
The specification of f is:
Fortran Interface
Subroutine f ( iflag, n, x, fx, iuser, ruser)
Integer, Intent (In) :: n
Integer, Intent (Inout) :: iflag, iuser(*)
Real (Kind=nag_wp), Intent (In) :: x(n)
Real (Kind=nag_wp), Intent (Inout) :: ruser(*)
Real (Kind=nag_wp), Intent (Out) :: fx(n)
C Header Interface
void  f_ (Integer *iflag, const Integer *n, const double x[], double fx[], Integer iuser[], double ruser[])
1: iflag Integer Input/Output
On entry: iflag will be zero.
On exit: iflag should either be unchanged from its entry value of zero, or may be set nonzero to indicate that there is a problem in evaluating the function fx; for instance fx may not be defined, or may be complex. If iflag is returned as nonzero then f01fff will terminate the computation, with ifail=-6.
2: n Integer Input
On entry: n, the number of function values required.
3: xn Real (Kind=nag_wp) array Input
On entry: the n points x1,x2,,xn at which the function f is to be evaluated.
4: fxn Real (Kind=nag_wp) array Output
On exit: the n function values. fxi should return the value fxi, for i=1,2,,n.
5: iuser* Integer array User Workspace
6: ruser* Real (Kind=nag_wp) array User Workspace
f is called with the arguments iuser and ruser as supplied to f01fff. You should use the arrays iuser and ruser to supply information to f.
f must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which f01fff is called. Arguments denoted as Input must not be changed by this procedure.
Note: f should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by f01fff. If your code inadvertently does return any NaNs or infinities, f01fff is likely to produce unexpected results.
6: iuser* Integer array User Workspace
7: ruser* Real (Kind=nag_wp) array User Workspace
iuser and ruser are not used by f01fff, but are passed directly to f and may be used to pass information to this routine.
8: iflag Integer Output
On exit: iflag=0, unless you have set iflag nonzero inside f, in which case iflag will be the value you set and ifail will be set to ifail=-6.
9: ifail Integer Input/Output
On entry: ifail must be set to 0, -1 or 1 to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of 0 causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of -1 means that an error message is printed while a value of 1 means that it is not.
If halting is not appropriate, the value -1 or 1 is recommended. If message printing is undesirable, then the value 1 is recommended. Otherwise, the value 0 is recommended. When the value -1 or 1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail>0
The computation of the spectral factorization failed to converge.
The value of ifail gives the number of off-diagonal elements of an intermediate tridiagonal form that did not converge to zero (see f08fnf).
ifail=-1
On entry, uplo=value.
Constraint: uplo='L' or 'U'.
ifail=-2
On entry, n=value.
Constraint: n0.
ifail=-3
An internal error occurred when computing the spectral factorization. Please contact NAG.
ifail=-4
On entry, lda=value and n=value.
Constraint: ldan.
ifail=-6
Termination requested in f.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

Provided that fD can be computed accurately then the computed matrix function will be close to the exact matrix function. See Section 10.2 of Higham (2008) for details and further discussion.

8 Parallelism and Performance

f01fff is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
f01fff makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The integer allocatable memory required is n, the real allocatable memory required is 4×n-2 and the complex allocatable memory required is approximately n+nb+1×n, where nb is the block size required by f08fnf.
The cost of the algorithm is On3 plus the cost of evaluating fD. If λ^i is the ith computed eigenvalue of A, then the user-supplied subroutine f will be asked to evaluate the function f at fλ^i, for i=1,2,,n.
For further information on matrix functions, see Higham (2008).
f01eff can be used to find the matrix function fA for a real symmetric matrix A.

10 Example

This example finds the matrix cosine, cosA, of the Hermitian matrix
A= 1 2+i 3+2i 4+3i 2-i 1 2+i 3+2i 3-2i 2-i 1 2+i 4-3i 3-2i 2-i 1 .  

10.1 Program Text

Program Text (f01fffe.f90)

10.2 Program Data

Program Data (f01fffe.d)

10.3 Program Results

Program Results (f01fffe.r)