g01abf computes the means, standard deviations, corrected sums of squares and products, maximum and minimum values, and the product-moment correlation coefficient for two variables. Unequal weighting may be given.

2 Specification

Fortran Interface

Subroutine g01abf (

n, x1, x2, iwt, wt, res, ifail)

Integer, Intent (In)	::	n
Integer, Intent (Inout)	::	iwt, ifail
Real (Kind=nag_wp), Intent (In)	::	x1(n), x2(n)
Real (Kind=nag_wp), Intent (Inout)	::	wt(n)
Real (Kind=nag_wp), Intent (Out)	::	res(13)

C Header Interface

#include <nag.h>

void	g01abf_ (const Integer n, const double x1[], const double x2[], Integer iwt, double wt[], double res[], Integer *ifail)

The routine may be called by the names g01abf or nagf_stat_summary_2var.

3 Description

The data consist of two samples of

n

observations, denoted by

x_{i}

, and

y_{i}

, for

i = 1, 2, \dots, n

, with corresponding weights

w_{i}

, for

i = 1, 2, \dots, n

If no specific weighting is given, then each

w_{i}

is set to

1.0

in g01abf.

The quantities calculated are:

(a)The sum of weights,
$W = \sum_{i = 1}^{n} w_{i} .$
(b)The means,
$\bar{x} = \frac{\sum_{i = 1}^{n} w_{i} x_{i}}{W}, \bar{y} = \frac{\sum_{i = 1}^{n} w_{i} y_{i}}{W} .$
(c)The corrected sums of squares and products
$\begin{array}{l} c_{11} = \sum_{i = 1}^{n} w_{i} {(x_{i} - \bar{x})}^{2} \\ c_{21} = c_{12} = \sum_{i = 1}^{n} w_{i} (x_{i} - \bar{x}) (y_{i} - \bar{y}) \\ c_{22} = \sum_{i = 1}^{n} w_{i} {(y_{i} - \bar{y})}^{2} . \end{array}$
(d)The standard deviations
$s_{j} = \sqrt{\frac{c_{j j}}{d}}, where j = 1, 2 and d = W - \frac{\sum_{i = 1}^{n} w_{i}^{2}}{W} .$
(e)The product-moment correlation coefficient
$R = \frac{c_{12}}{\sqrt{c_{11} c_{22}}} .$
(f)The minimum and maximum elements in each of the two samples.
(g)The number of pairs of observations, $m$ , for which $w_{i} > 0$ , i.e., the number of valid observations. The quantities in (d) and (e) above will only be computed if $m \geq 2$ . All other items are computed if $m \geq 1$ .

4 References

None.

5 Arguments

1: $n$ – Integer Input

On entry:

n

, the number of pairs of observations.

Constraint:

n \geq 1

2: $x1 (n)$ – Real (Kind=nag_wp) array Input

On entry: the observations from the first sample,

x_{i}

, for

i = 1, 2, \dots, n

3: $x2 (n)$ – Real (Kind=nag_wp) array Input

On entry: the observations from the second sample,

y_{i}

, for

i = 1, 2, \dots, n

4: $iwt$ – Integer Input/Output

On entry: indicates whether user-supplied weights are provided by you:

iwt = 1

Indicates that user-supplied weights are given in the array wt.

iwt \neq 0

Indicates that user-supplied weights are not given. In this case the routine assigns the value $1.0$ to each element of the weight array, wt.

On exit: is used to indicate the number of valid observations,

m

; see Section 3(g), above.

5: $wt (n)$ – Real (Kind=nag_wp) array Input/Output

On entry: if weights are being supplied then the elements of wt must contain the weights associated with the observations,

w_{i}

, for

i = 1, 2, \dots, n

Constraint: if

iwt = 1

wt (i) \geq 0.0

, for

i = 1, 2, \dots, n

On exit: if

iwt = 1

, the elements of wt are unchanged, otherwise each element of wt will be assigned the value

1.0

6: $res (13)$ – Real (Kind=nag_wp) array Output

On exit: the elements of res contain the following results:

$res (1)$	mean of the first sample, $\bar{x}$ ;
$res (2)$	mean of the second sample, $\bar{y}$ ;
$res (3)$	standard deviation of the first sample, $s_{1}$ ;
$res (4)$	standard deviation of the second sample, $s_{2}$ ;
$res (5)$	corrected sum of squares of the first sample, $c_{11}$ ;
$res (6)$	corrected sum of products of the two samples, $c_{12}$ ;
$res (7)$	corrected sum of squares of the second sample, $c_{22}$ ;
$res (8)$	product-moment correlation coefficient, $R$ ;
$res (9)$	minimum of the first sample;
$res (10)$	maximum of the first sample;
$res (11)$	minimum of the second sample;
$res (12)$	maximum of the second sample;
$res (13)$	sum of weights, $\sum_{i = 1}^{n} w_{i}$ ( $= n$ , if $iwt = 0$ , on entry).

7: $ifail$ – Integer Input/Output

On entry: ifail must be set to

0

- 1 or 1

. If you are unfamiliar with this argument you should refer to Section 4 in the Introduction to the NAG Library FL Interface for details.

For environments where it might be inappropriate to halt program execution when an error is detected, the value

- 1 or 1

is recommended. If the output of error messages is undesirable, then the value

1

is recommended. Otherwise, if you are not familiar with this argument, the recommended value is

0

. When the value $- 1 or 1$ is used it is essential to test the value of ifail on exit.

On exit:

ifail = 0

unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

- 1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 1$: On entry, $n = 〈value〉$ .
Constraint: $n \geq 1$ .

$ifail = 2$: The number of valid cases, $m$ , is $1$ . In this case standard deviation and product-moment correlation coefficient cannot be calculated.

$ifail = 3$: On entry, $wt (〈value〉) = 〈value〉$ .
Constraint: $wt (i) \geq 0.0$ , for $i = 1, 2, \dots, n$

The number of valid cases, $m$ , is $0$ .

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The method used is believed to be stable.

8 Parallelism and Performance

g01abf is not threaded in any implementation.

9 Further Comments

The time taken by g01abf increases linearly with

n

10 Example

In the program below, NPROB determines the number of datasets to be analysed. For each analysis, a set of observations and, optionally, weights, is read and printed. After calling g01abf, all the calculated quantities are printed. In the example, there is one set of data, with

29

(unweighted) pairs of observations.

Interfaces: FL CL AD

NAG FL Interface Introduction

G01 (Stat) Chapter Contents

G01 (Stat) Chapter Introduction

g01ab: FL CL AD

NAG FL Interfaceg01abf (summary_​2var)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG FL Interface
g01abf (summary_2var)