NAG CL Interface
e04nqc (qpconvex2_sparse_solve)
Note: this function uses optional parameters to define choices in the problem specification and in the details of the algorithm. If you wish to use default
settings for all of the optional parameters, you need only read Sections 1 to 10 of this document. If, however, you wish to reset some or all of the settings please refer to Section 11 for a detailed description of the algorithm, to Section 12 for a detailed description of the specification of the optional parameters and to Section 13 for a detailed description of the monitoring information produced by the function.
1
Purpose
e04nqc solves sparse linear programming or convex quadratic programming problems. The initialization function
e04npc must have been called before calling
e04nqc.
2
Specification
void |
e04nqc (Nag_Start start,
Integer m,
Integer n,
Integer ne,
Integer nname,
Integer lenc,
Integer ncolh,
Integer iobj,
double objadd,
const char *prob,
const double acol[],
const Integer inda[],
const Integer loca[],
const double bl[],
const double bu[],
const double c[],
const char *names[],
const Integer helast[],
Integer hs[],
double x[],
double pi[],
double rc[],
Integer *ns,
Integer *ninf,
double *sinf,
double *obj,
Nag_E04State *state,
Nag_Comm *comm,
NagError *fail) |
|
The function may be called by the names: e04nqc, nag_opt_qpconvex2_sparse_solve or nag_opt_sparse_convex_qp_solve.
Before calling
e04nqc or one of the option setting functions
e04npc must be called.
The specification for
e04npc is:
void |
nag_opt_sparse_convex_qp_init (Nag_E04State *state,
NagError *fail) |
|
After calling
e04nqc you can call one or both of the functions
to obtain the current value of an optional parameter.
3
Description
e04nqc is designed to solve large-scale
linear or
quadratic programming problems of the form:
where
is an
-vector of variables,
and
are constant lower and upper bounds,
is an
by
sparse matrix and
is a linear or quadratic objective function that may be specified in a variety of ways, depending upon the particular problem being solved. The optional parameter
may be used to specify a problem in which
is maximized instead of minimized.
Upper and lower bounds are specified for all variables and constraints. This form allows full generality in specifying various types of constraint. In particular, the th constraint may be defined as an equality by setting . If certain bounds are not present, the associated elements of or may be set to special values that are treated as or .
The possible forms for the function
are summarised in
Table 1. The most general form for
is
where
is a constant,
is a constant
-vector and
is a constant symmetric
by
matrix with elements
. In this form,
is a quadratic function of
and
(1) is known as a
quadratic program (QP).
e04nqc is suitable for all
convex quadratic programs. The defining feature of a
convex QP is that the matrix
must be
positive semidefinite, i.e., it must satisfy
for all
. If not,
is nonconvex and
e04nqc will terminate with the error indicator
NE_HESS_INDEF. If
is nonconvex it may be more appropriate to call
e04vhc instead.
Problem type |
Objective function |
Hessian matrix |
FP |
Not applicable |
|
LP |
|
|
QP |
|
Symmetric positive semidefinite |
Table 1
Choices for the objective function
If
, then
and the problem is known as a
linear program (LP). In this case, rather than defining an
with zero elements, you can define
to have no columns by setting
(see
Section 5).
If , , and , there is no objective function and the problem is a feasible point problem (FP), which is equivalent to finding a point that satisfies the constraints on . In the situation where no feasible point exists, several options are available for finding a point that minimizes the constraint violations (see the description of the optional parameter ).
e04nqc is suitable for large LPs and QPs in which the matrix
is
sparse, i.e., when the number of zero elements is sufficiently large that it is worthwhile using algorithms which avoid computations and storage involving zero elements. The matrix
is input to
e04nqc by means of the three array arguments
acol,
inda and
loca. This allows you to specify the pattern of nonzero elements in
.
e04nqc exploits structure in by requiring to be defined implicitly in a function
that computes the product for any given vector . In many cases, the product can be computed very efficiently for any given , e.g., may be a sparse matrix, or a sum of matrices of rank-one.
For problems in which
can be treated as a
dense matrix, it is usually more efficient to use
e04mfc,
e04ncc or
e04nfc.
There is considerable flexibility allowed in the definition of
in
Table 1. The vector
defining the linear term
can be input in three ways: as a sparse row of
; as an explicit dense vector
; or as both a sparse row and an explicit vector (in which case,
will be the sum of two linear terms). When stored in
,
is the
iobjth row of
, which is known as the
objective row. The objective row must always be a
free row of
in the sense that its lower and upper bounds must be
and
. Storing
as part of
is recommended if
is a sparse vector. Storing
as an explicit vector is recommended for a sequence of problems, each with a different objective (see arguments
c and
lenc).
The upper and lower bounds on the
elements of
are said to define the
general constraints of the problem. Internally,
e04nqc converts the general constraints to equalities by introducing a set of
slack variables , where
. For example, the linear constraint
is replaced by
, together with the bounded slack
. The problem defined by
(1) can therefore be re-written in the following equivalent form:
Since the slack variables
are subject to the same upper and lower bounds as the elements of
, the bounds on
and
can simply be thought of as bounds on the combined vector
. (In order to indicate their special role in QP problems, the original variables
are sometimes known as ‘column variables’, and the slack variables
are known as ‘row variables’.)
Each LP or QP problem is solved using a two-phase iterative procedure (in which the general constraints are satisfied throughout): a feasibility phase (Phase 1), in which the sum of infeasibilities with respect to the bounds on and is minimized to find a feasible point that satisfies all constraints within a specified feasibility tolerance; and an optimality phase (Phase 2), in which is minimized (or maximized) by constructing a sequence of iterates that lies within the feasible region.
Phase 1 involves solving a linear program of the form
Phase 1 |
|
|
|
|
|
which is equivalent to minimizing the sum of the constraint violations. If the constraints are feasible (i.e., at least one feasible point exists), eventually a point will be found at which both
and
are zero. Then the associated value of
satisfies the original constraints and is used as the starting point for the Phase 2 iterations for minimizing
.
If the constraints are infeasible (i.e.,
or
at the end of Phase 1), no solution exists for
(1) and you have the option of either terminating or continuing in so-called
elastic mode (see the discussion of the optional parameter
). In elastic mode, a ‘relaxed’ or ‘perturbed’ problem is solved in which
is minimized while allowing some of the bounds to become ‘elastic’, i.e., to change from their specified values. Variables subject to elastic bounds are known as
elastic variables. An elastic variable is free to violate one or both of its original upper or lower bounds. You are able to assign which bounds will become elastic if elastic mode is ever started (see the argument
helast in
Section 5).
To make the relaxed problem meaningful,
e04nqc minimizes
while (in some sense) finding the ‘smallest’ violation of the elastic variables. In the situation where all the variables are elastic, the relaxed problem has the form
Phase 2 ()
|
|
|
|
|
,
|
where
is a non-negative argument known as the
elastic weight (see the description of the optional parameter
), and
is called the
composite objective. In the more general situation where only a subset of the bounds are elastic, the
's and
's for the non-elastic bounds are fixed at zero.
The elastic weight can be chosen to make the composite objective behave like the original objective , the sum of infeasibilities, or anything in-between. If , e04nqc will attempt to minimize subject to the (true) upper and lower bounds on the non-elastic variables (and declare the problem infeasible if the non-elastic variables cannot be made feasible).
At the other extreme, choosing sufficiently large will have the effect of minimizing the sum of the violations of the elastic variables subject to the original constraints on the non-elastic variables. Choosing a large value of the elastic weight is useful for defining a ‘least-infeasible’ point for an infeasible problem.
In Phase 1 and elastic mode, all calculations involving and are done implicitly in the sense that an elastic variable is allowed to violate its lower bound (say) and an explicit value of can be recovered as .
A constraint is said to be active or binding at if the associated element of either or is equal to one of its upper or lower bounds. Since an active constraint in has its associated slack variable at a bound, the status of both simple and general upper and lower bounds can be conveniently described in terms of the status of the variables . A variable is said to be nonbasic if it is temporarily fixed at its upper or lower bound. It follows that regarding a general constraint as being active is equivalent to thinking of its associated slack as being nonbasic.
At each iteration of an active-set method, the constraints
are (conceptually) partitioned into the form
where
consists of the nonbasic elements of
and the
basis matrix is square and nonsingular. The elements of
and
are called the
basic and
superbasic variables respectively; with
they are a permutation of the elements of
and
. At a QP solution, the basic and superbasic variables will lie somewhere between their upper or lower bounds, while the nonbasic variables will be equal to one of their bounds. At each iteration,
is regarded as a set of independent variables that are free to move in any desired direction, namely one that will improve the value of the objective function (or sum of infeasibilities). The basic variables are then adjusted in order to ensure that
continues to satisfy
. The number of superbasic variables (
say) therefore indicates the number of degrees of freedom remaining after the constraints have been satisfied. In broad terms,
is a measure of
how nonlinear the problem is. In particular,
will always be zero for FP and LP problems.
If it appears that no improvement can be made with the current definition of , and , a nonbasic variable is selected to be added to , and the process is repeated with the value of increased by one. At all stages, if a basic or superbasic variable encounters one of its bounds, the variable is made nonbasic and the value of is decreased by one.
Associated with each of the equality constraints is a dual variable . Similarly, each variable in has an associated reduced gradient (also known as a reduced cost). The reduced gradients for the variables are the quantities , where is the gradient of the QP objective function, and the reduced gradients for the slack variables are the dual variables . The QP subproblem is optimal if for all nonbasic variables at their lower bounds, for all nonbasic variables at their upper bounds and for all superbasic variables. In practice, an approximate QP solution is found by slightly relaxing these conditions on (see the description of the optional parameter ).
The process of computing and comparing reduced gradients is known as
pricing (a term first introduced in the context of the simplex method for linear programming). To ‘price’ a nonbasic variable
means that the reduced gradient
associated with the relevant active upper or lower bound on
is computed via the formula
, where
is the
th column of
. (The variable selected by such a process and the corresponding value of
(i.e., its reduced gradient) are the quantities
+SBS and
dj in the monitoring file output; see
Section 9.1.) If
has significantly more columns than rows (i.e.,
), pricing can be computationally expensive. In this case, a strategy known as
partial pricing can be used to compute and compare only a subset of the
s.
e04nqc is based on SQOPT, which is part of the SNOPT package described in
Gill et al. (2005a). It uses stable numerical methods throughout and includes a reliable basis package (for maintaining sparse
factors of the basis matrix
), a practical anti-degeneracy procedure, efficient handling of linear constraints and bounds on the variables (by an active-set strategy), as well as automatic scaling of the constraints. Further details can be found in
Section 11.
4
References
Fourer R (1982) Solving staircase linear programs by the simplex method Math. Programming 23 274–313
Gill P E and Murray W (1978) Numerically stable methods for quadratic programming Math. Programming 14 349–372
Gill P E, Murray W and Saunders M A (1995) User's guide for QPOPT 1.0: a Fortran package for quadratic programming Report SOL 95-4 Department of Operations Research, Stanford University
Gill P E, Murray W and Saunders M A (2005a) Users' guide for SQOPT 7: a Fortran package for large-scale linear and quadratic programming
Report NA 05-1 Department of Mathematics, University of California, San Diego
https://www.ccom.ucsd.edu/~peg/papers/sqdoc7.pdf
Gill P E, Murray W and Saunders M A (2005b) Users' guide for SNOPT 7.1: a Fortran package for large-scale linear nonlinear programming
Report NA 05-2 Department of Mathematics, University of California, San Diego
https://www.ccom.ucsd.edu/~peg/papers/sndoc7.pdf
Gill P E, Murray W, Saunders M A and Wright M H (1987) Maintaining LU factors of a general sparse matrix Linear Algebra and its Applics. 88/89 239–270
Gill P E, Murray W, Saunders M A and Wright M H (1989) A practical anti-cycling procedure for linearly constrained optimization Math. Programming 45 437–474
Gill P E, Murray W, Saunders M A and Wright M H (1991) Inertia-controlling methods for general quadratic programming SIAM Rev. 33 1–36
Hall J A J and McKinnon K I M (1996) The simplest examples where the simplex method cycles and conditions where EXPAND fails to prevent cycling Report MS 96–100 Department of Mathematics and Statistics, University of Edinburgh
5
Arguments
The first
entries of the arguments
bl,
bu,
hs and
x refer to the variables
. The last
entries refer to the slacks
.
-
1:
– Nag_Start
Input
-
On entry: indicates how a starting basis (and certain other items) will be obtained.
- Requests that an internal Crash procedure be used to choose an initial basis, unless a Basis file is provided via optional parameters , or .
- Is the same as but is more meaningful when a Basis file is given.
- Means that a basis is already defined in hs and a start point is already defined in x (probably from an earlier call).
Constraint:
, or .
-
2:
– function, supplied by the user
External Function
-
For QP problems, you must supply a version of
qphx to compute the matrix product
for a given vector
. If
has rows and columns of zeros, it is most efficient to order
so that the nonlinear variables appear first. For example, if
and only
enters the objective quadratically, then
In this case,
ncolh should be the dimension of
, and
qphx should compute
. For FP and LP problems,
qphx will never be called by
e04nqc and hence
qphx may be specified as
NULLFN.
The specification of
qphx is:
-
1:
– Integer
Input
-
On entry: this is the same argument
ncolh as supplied to
e04nqc.
-
2:
– const double
Input
-
On entry: the first
ncolh elements of the vector
.
-
3:
– double
Output
-
On exit: the product
. If
ncolh is less than the input argument
n,
is really the product
in
(2).
-
4:
– Integer
Input
-
On entry: allows you to save computation time if certain data must be read or calculated only once. To preserve this data for a subsequent calculation place it in
comm.
- e04nqc is calling qphx for the first time.
- There is nothing special about the current call of qphx.
- e04nqc is calling qphx for the last time. This argument setting allows you to perform some additional computation on the final solution.
- The current is optimal.
- The problem appears to be infeasible.
- The problem appears to be unbounded.
- The iterations limit was reached.
-
5:
– Nag_Comm *
Pointer to structure of type Nag_Comm; the following members are relevant to
qphx.
- user – double *
- iuser – Integer *
- p – Pointer
The type Pointer will be
void *. Before calling
e04nqc you may allocate memory and initialize these pointers with various quantities for use by
qphx when called from
e04nqc (see
Section 3.1.1 in the Introduction to the NAG Library CL Interface).
Note: qphx should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by
e04nqc. If your code inadvertently
does return any NaNs or infinities,
e04nqc is likely to produce unexpected results.
-
3:
– Integer
Input
-
On entry:
, the number of general linear constraints (or slacks). This is the number of rows in the linear constraint matrix
, including the free row (if any; see
iobj). Note that
must have at least one row. If your problem has no constraints, or only upper or lower bounds on the variables, then you must include a dummy row with sufficiently wide upper and lower bounds (see also
acol,
inda and
loca).
Constraint:
.
-
4:
– Integer
Input
-
On entry: , the number of variables (excluding slacks). This is the number of columns in the linear constraint matrix .
Constraint:
.
-
5:
– Integer
Input
-
On entry: the number of nonzero elements in .
Constraint:
.
-
6:
– Integer
Input
-
On entry: the number of column (i.e., variable) and row names supplied in the array
names.
- There are no names. Default names will be used in the printed output.
- All names must be supplied.
Constraint:
or .
-
7:
– Integer
Input
-
On entry: the number of elements in the constant objective vector
.
If
, the first
lenc elements of
belong to variables corresponding to the constant objective term
.
Constraint:
.
-
8:
– Integer
Input
-
On entry:
, the number of leading nonzero columns of the Hessian matrix
. For FP and LP problems,
ncolh must be set to zero.
The first
ncolh elements of
belong to variables corresponding to the nonzero block of the QP Hessian.
Constraint:
.
-
9:
– Integer
Input
-
On entry: if
, row
iobj of
is a free row containing the nonzero elements of the vector
appearing in the linear objective term
.
If
, there is no free row, and the linear objective vector should be supplied in array
c.
Constraint:
.
-
10:
– double
Input
-
On entry: the constant , to be added to the objective for printing purposes. Typically .
-
11:
– const char *
Input
-
On entry: the name for the problem. It is used in the printed solution and in some functions that output Basis files. Only the first eight characters of
prob are significant.
-
12:
– const double
Input
-
On entry: the nonzero elements of , ordered by increasing column index. Note that all elements must be assigned a value in the calling program.
-
13:
– const Integer
Input
-
On entry:
must contain the row index of the nonzero element stored in
, for
. Thus a pair of values
contains a matrix element and its corresponding row index.
If
, the first
lenc elements of
acol and
inda belong to variables corresponding to the constant objectiver term
.
If the problem has a quadratic objective, the first
ncolh columns of
acol and
inda belong to variables corresponding to the nonzero block of the
Hessian. Function
qphx knows about these variables.
Note that the row indices for a column must lie in the range
to
m, and may be supplied in any order.
Constraint:
, for .
-
14:
– const Integer
Input
-
On entry:
must contain the value
, where
is the index in
acol and
inda of the start of the
th column, for
. Thus, the entries of column
are held in
, and their corresponding row indices are in
, for
, where
and
. To specify the
th column as empty, set
. Note that the first and last elements of
loca must be
and
. If your problem has no constraints, or just bounds on the variables, you may include a dummy ‘free’ row with a single (zero) element by setting
,
,
,
, and
, for
. This row is made ‘free’ by setting its bounds to be
and
, where
is the value of the optional parameter
.
Constraints:
- ;
- , for ;
- ;
- , for .
-
15:
– const double
Input
-
On entry:
, the lower bounds for all the variables and general constraints, in the following order. The first
n elements of
bl must contain the bounds on the variables
, and the next
m elements the bounds for the general linear constraints
(which, equivalently, are the bounds for the slacks,
) and the free row (if any). To fix the
th variable, set
, say, where
. To specify a nonexistent lower bound (i.e.,
), set
. Here,
is the value of the optional parameter
. To specify the
th constraint as an
equality, set
, say, where
. Note that the lower bound corresponding to the free row must be set to
and stored in
.
Constraint:
if
,
(See also the description for
bu.)
-
16:
– const double
Input
-
On entry:
, the upper bounds for all the variables and general constraints, in the following order. The first
n elements of
bu must contain the bounds on the variables
, and the next
m elements the bounds for the general linear constraints
(which, equivalently, are the bounds for the slacks,
) and the free row (if any). To specify a nonexistent upper bound (i.e.,
), set
. Note that the upper bound corresponding to the free row must be set to
and stored in
.
Constraints:
- if , ;
- otherwise .
-
17:
– const double
Input
-
On entry: contains the explicit objective vector
(if any). If
,
c is not referenced and may be
NULL.
-
18:
– const char *
Input
-
On entry: the optional column and row names, respectively.
If
,
names is not referenced and the printed output will use default names for the columns and rows.
If
, the first
n elements must contain the names for the columns and the next
m elements must contain the names for the rows. Note that the name for the free row (if any) must be stored in
.
Note: that only the first eight characters of the strings in
names are significant.
-
19:
– const Integer
Input
-
On entry: defines which variables are to be treated as being elastic in elastic mode. The allowed values of
helast are:
| Status in elastic mode |
| Variable is non-elastic and cannot be infeasible |
| Variable can violate its lower bound |
| Variable can violate its upper bound |
| Variable can violate either its lower or upper bound |
helast need not be assigned if optional parameter
.
Constraint:
if , , for .
-
20:
– Integer
Input/Output
-
On entry: if
or
, and a Basis file of some sort is to be input (see the description of the optional parameters
,
or
), then
hs and
x need not be set at all.
If
or
and there is no Basis file, the first
n elements of
hs and
x must specify the initial states and values, respectively, of the variables
. (The slacks
need not be initialized.) An internal Crash procedure is then used to select an initial basis matrix
. The initial basis matrix will be triangular (neglecting certain small elements in each column). It is chosen from various rows and columns of
. Possible values for
are as follows:
| State of during Crash procedure |
or | Eligible for the basis |
| Ignored |
| Eligible for the basis (given preference over or ) |
or | Ignored |
If nothing special is known about the problem, or there is no wish to provide special information, you may set
and , for . All variables will then be eligible for the initial basis. Less trivially, to say that the th variable will probably be equal to one of its bounds, set and or and as appropriate.
Following the Crash procedure, variables for which are made superbasic. Other variables not selected for the basis are then made nonbasic at the value if , or at the value or closest to .
If
,
hs and
x must specify the initial states and values, respectively, of the variables and slacks
. If
e04nqc has been called previously with the same values of
n and
m,
hs already contains satisfactory information.
Constraints:
- if or ,
, for ;
- if ,
, for .
On exit: the final states of the variables and slacks
. The significance of each possible value of
is as follows:
| State of variable | Normal value of |
| Nonbasic | |
| Nonbasic | |
| Superbasic | Between and |
| Basic | Between and |
If , basic and superbasic variables may be outside their bounds by as much as the value of the optional parameter . Note that unless the optional parameter is specified, the optional parameter applies to the variables of the scaled problem. In this case, the variables of the original problem may be as much as outside their bounds, but this is unlikely unless the problem is very badly scaled.
Very occasionally some nonbasic variables may be outside their bounds by as much as the optional parameter , and there may be some nonbasic variables for which lies strictly between its bounds.
If
, some basic and superbasic variables may be outside their bounds by an arbitrary amount (bounded by
sinf if
).
-
21:
– double
Input/Output
-
On entry: the initial values of the variables
, and, if
, the slacks
, i.e.,
. (See the description for argument
hs.)
On exit: the final values of the variables and slacks .
-
22:
– double
Output
-
On exit: contains the dual variables (a set of Lagrange multipliers (shadow prices) for the general constraints).
-
23:
– double
Output
-
On exit: contains the reduced costs,
. The vector
is the gradient of the objective if
x is feasible, otherwise it is the gradient of the Phase 1 objective. In the former case,
, for
, hence
.
-
24:
– Integer *
Input/Output
-
On entry:
, the number of superbasics. For QP problems,
ns need not be specified if
, but must retain its value from a previous call when
. For FP and LP problems,
ns need not be initialized.
On exit: the final number of superbasics. This will be zero for FP and LP problems.
-
25:
– Integer *
Output
-
On exit: the number of infeasibilities.
-
26:
– double *
Output
-
On exit: the sum of the scaled infeasibilities. This will be zero if , and is most meaningful when .
-
27:
– double *
Output
-
On exit: the value of the objective function.
If
,
obj includes the quadratic objective term
(if any).
If
,
obj is just the linear objective term
(if any).
For FP problems,
obj is set to zero.
Note that
obj does not include contributions from the constant term
objadd or the objective row, if any.
-
28:
– Nag_E04State *
Communication Structure
-
state contains internal information required for functions in this suite. It must not be modified in any way.
-
29:
– Nag_Comm *
-
The NAG communication argument (see
Section 3.1.1 in the Introduction to the NAG Library CL Interface).
-
30:
– NagError *
Input/Output
-
The NAG error argument (see
Section 7 in the Introduction to the NAG Library CL Interface).
e04nqc returns with
NE_NOERROR if the reduced gradient (
rgNorm; see
Section 9.1) is negligible, the Lagrange multipliers (
Lagr Mult; see
Section 9.1) are optimal,
satisfies the constraints to the accuracy requested by the value of the optional parameter
and the reduced Hessian factor
(see
Section 11.2) is nonsingular.
6
Error Indicators and Warnings
- NE_ALLOC_FAIL
-
Dynamic memory allocation failed.
See
Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.
Internal memory allocation failed when attempting to obtain workspace sizes
,
and
. Please contact
NAG.
- NE_ALLOC_INSUFFICIENT
-
Internal memory allocation was insufficient. Please contact
NAG.
- NE_ARRAY_INPUT
-
On entry, , , .
Constraint: or .
On entry, row index in is outside the range to .
- NE_BAD_PARAM
-
Basis file dimensions do not match this problem.
On entry, argument had an illegal value.
- NE_BASIS_FAILURE
-
An error has occurred in the basis package, perhaps indicating incorrect setup of arrays
inda and
loca. Set the optional parameter
and examine the output carefully for further information.
- NE_BASIS_ILL_COND
-
Numerical difficulties have been encountered and no further progress can be made.
Numerical error in trying to satisfy the general constraints. The basis is very ill-conditioned.
An factorization of the basis has just been obtained and used to recompute the basic variables , given the present values of the superbasic and nonbasic variables. However, a row check has revealed that the resulting solution does not satisfy the current constraints sufficiently well.
This probably means that the current basis is very ill-conditioned. Request the if there are any linear constraints and variables.
For certain highly structured basis matrices (notably those with band structure), a systematic growth may occur in the factor
. Consult the description of
Umax,
Umin and
Growth in
Section 13, and set the optional parameter
to
(or possibly even smaller, but not less than
).
- NE_BASIS_SINGULAR
-
The basis is singular after several attempts to factorize it (and add slacks where necessary).
Either the problem is badly scaled or the value of the optional parameter is too large.
- NE_E04NPC_NOT_INIT
-
The initialization function
e04npc has not been called.
- NE_HESS_INDEF
-
Error in
qphx: the QP Hessian is indefinite.
An indefinite matrix was detected during the computation of the reduced Hessian factor
(see
Section 11.2). This may be caused by
being indefinite. Check also that
qphx has been coded correctly and that all relevant elements of
have been assigned their correct values. If
qphx is coded correctly and
is positive semidefinite, the failure may be caused by ill conditioning. Try reducing the values of the optional parameters
and
. If there are very large values in
, check the scaling of the variables and constraints.
- NE_HESS_TOO_BIG
-
The value of the optional parameter is too small.
The current set of basic and superbasic variables have been optimized as much as possible and a pricing operation is necessary to continue, but there are already superbasics (and no room for any more).
In general, raise the
by a reasonable amount, bearing in mind the storage needed for reduced Hessian (see
Section 11.2). (The
will also increase to
unless specified otherwise, and the associated storage will be about
words.) In some cases you may have to set
to conserve storage, but beware that the rate of convergence will probably fall off severely.
- NE_INT
-
On entry, .
Constraint: .
On entry, .
Constraint: .
- NE_INT_2
-
On entry, and .
Constraint: .
On entry, and .
Constraint: .
On entry, and .
Constraint: .
On entry,
ne is not equal to the number of nonzeros in
acol.
, nonzeros in
.
- NE_INT_3
-
On entry, , and .
Constraint: .
On entry, , and .
Constraint: or .
On entry, , and .
Constraint: .
On entry, , and .
Constraint: or .
- NE_INTERNAL_ERROR
-
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact
NAG for assistance.
See
Section 7.5 in the Introduction to the NAG Library CL Interface for further information.
An unexpected error has occurred. Set the optional parameter and examine the output carefully for further information.
- NE_NO_LICENCE
-
Your licence key may have expired or may not have been installed correctly.
See
Section 8 in the Introduction to the NAG Library CL Interface for further information.
- NE_NOT_REQUIRED_ACC
-
The requested accuracy could not be achieved.
- NE_REAL_2
-
On entry, bounds
bl and
bu for
are equal and infinite:
and
.
On entry, bounds
bl and
bu for
are equal and infinite.
and
.
On entry, bounds for are inconsistent. and .
- NE_UNBOUNDED
-
The problem appears to be unbounded. The constraint violation limit has been reached.
The problem appears to be unbounded. The objective function is unbounded.
The problem is unbounded (or badly scaled). For a minimization problem, the objective function is not bounded below in the feasible region.
For linear problems, unboundedness is detected by the simplex method when a nonbasic variable can be increased or decreased by an arbitrary amount without causing a basic variable to violate a bound. Consider adding an upper or lower bound to the variable. Also, examine the constraints that have nonzeros in the associated column, to see if they have been formulated as intended.
Very rarely, the scaling of the problem could be so poor that numerical error will give an erroneous indication of unboundedness. Consider using the optional parameter .
- NW_NOT_FEASIBLE
-
The linear constraints appear to be infeasible.
The problem appears to be infeasible. Infeasibilites have been minimized.
The problem appears to be infeasible. Nonlinear infeasibilites have been minimized.
The problem appears to be infeasible. The linear equality constraints could not be satisfied.
The problem is infeasible. The general constraints cannot all be satisfied simultaneously to within the value of the optional parameter .
Feasibility is measured with respect to the upper and lower bounds on the variables and slacks. The message tells us that among all the points satisfying the general constraints , there is apparently no point that satisfies the bounds on and . Violations as small as the are ignored, but at least one component of or violates a bound by more than the tolerance.
Note: although the objective function is the sum of infeasibilities (when ), this sum will not necessarily have been minimized when .
If , e04nqc will optimize the QP objective and the sum of infeasibilities, suitably weighted using the optional parameter . The function will tend to determine a ‘good’ infeasible point if the elastic weight is sufficiently large.
- NW_SOLN_NOT_UNIQUE
-
Weak solution found – the solution is not unique.
- NW_TOO_MANY_ITER
-
Iteration limit reached.
Major iteration limit reached.
Too many iterations. The value of the optional parameter is too small.
The Iterations limit was exceeded before the required solution could be found. Check the iteration log to be sure that progress was being made. If so, restart the run using a Basis file that was saved at the end of the run.
7
Accuracy
e04nqc implements a numerically stable active-set strategy and returns solutions that are as accurate as the condition of the problem warrants on the machine.
8
Parallelism and Performance
e04nqc makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the
X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the
Users' Note for your implementation for any additional implementation-specific information.
This section contains a description of the printed output.
9.1
Description of the Printed Output
If , one line of information is output to the every th iteration, where is the specified . A heading is printed before the first such line following a basis factorization. The heading contains the items described below. In this description, a pricing operation is defined to be the process by which one or more nonbasic variables are selected to become superbasic (in addition to those already in the superbasic set). The variable selected will be denoted by jq. If the problem is purely linear, variable jq will usually become basic immediately (unless it should happen to reach its opposite bound and return to the nonbasic set).
If optional parameter
is in effect, variable
jq is selected from
or
, the
ppth segments of the constraint matrix
.
Label |
Description |
Itn |
is the iteration count.
|
pp |
is the partial-price indicator. The variable selected by the last pricing operation came from the ppth partition of and . Note that pp is reset to zero whenever the basis is refactorized. |
dj |
is the value of the reduced gradient (or reduced cost) for the variable selected by the pricing operation at the start of the current iteration.
Algebraically, dj is , for , where is the gradient of the current objective function, is the vector of dual variables, and is the th column of the constraint matrix .
Note that dj is the norm of the reduced-gradient vector at the start of the iteration, just after the pricing operation. |
+SBS |
is the variable jq selected by the pricing operation to be added to the superbasic set. |
-SBS |
is the variable chosen to leave the superbasic set. It has become basic if the entry under -B is nonzero, otherwise it becomes nonbasic. |
-BS |
is the variable removed from the basis to become nonbasic. |
Step |
is the value of the step length taken along the current search direction . The variables have just been changed to . If a variable is made superbasic during the current iteration (i.e., +SBS is positive), Step will be the step to the nearest bound. During the optimality phase, the step can be greater than unity only if the reduced Hessian is not positive definite. |
Pivot |
is the th element of a vector satisfying whenever (the th column of the constraint matrix replaces the th column of the basis matrix . Wherever possible, Step is chosen so as to avoid extremely small values of Pivot (since they may cause the basis to be nearly singular). In extreme cases, it may be necessary to increase the value of the optional parameter to exclude very small elements of from consideration during the computation of Step. |
nInf |
is the number of violated constraints (infeasibilities) before the present iteration. This number will not increase unless iterations are in elastic mode.
|
sInf |
is the sum of infeasibilities before the present iteration. It will usually decrease at each nonzero step, but if nInf decreases by or more, sInf may occasionally increase. However, in elastic mode it will decrease monotonically.
|
Objective |
is the value of the current objective function after the present iteration. Note, if is , the heading is Composite Obj.
|
L+U |
L is the number of nonzeros in the basis factor . Immediately after a basis factorization , L contains lenL (see Section 13). Further nonzeros are added to L when various columns of are later replaced. (Thus, L increases monotonically.) U is the number of nonzeros in the basis factor . Immediately after a basis factorization , U contains lenU (see Section 13). As columns of are replaced, the matrix is maintained explicitly (in sparse form). The value of U may fluctuate up or down; in general, it will tend to increase. |
ncp |
is the number of compressions required to recover workspace in the data structure for . This includes the number of compressions needed during the previous basis factorization. Normally, ncp should increase very slowly. |
The following will be output if the problem is QP or if the superbasic set is non-empty.
Label |
Description |
rgNorm |
is the largest reduced-gradient among the superbasic variables after the current iteration. During the optimality phase, this will be approximately zero after a unit step. |
nS |
is the current number of superbasic variables. |
condHz |
is a lower bound on the condition number of the reduced Hessian (see Section 11.2). The larger this number, the more difficult the problem. Attention should be given to the scaling of the variables and the constraints to guard against high values of condHz. |
10
Example
This example minimizes the quadratic function
, where
subject to the bounds
and to the linear constraints
The initial point, which is infeasible, is
The optimal solution (to five figures) is
One bound constraint and four linear constraints are active at the solution. Note that the Hessian matrix
is positive semidefinite.
10.1
Program Text
10.2
Program Data
10.3
Program Results
Note: the remainder of this document is intended for more advanced users.
Section 11 contains a detailed description of the algorithm which may be needed in order to understand
Sections 12 and
13.
Section 12 describes the optional parameters which may be set by calls to
e04nrc,
e04nsc,
e04ntc and/or
e04nuc.
Section 13 describes the quantities which can be requested to monitor the course of the computation.
11
Algorithmic Details
This section contains a detailed description of the method used by e04nqc.
11.1
Overview
e04nqc is based on an inertia-controlling method that maintains a Cholesky factorization of the reduced Hessian (see below). The method is similar to that of
Gill and Murray (1978), and is described in detail by
Gill et al. (1991). Here we briefly summarise the main features of the method. Where possible, explicit reference is made to the names of variables that are arguments of the function or appear in the printed output.
The method used has two distinct phases: finding an initial feasible point by minimizing the sum of infeasibilities (the
feasibility phase), and minimizing the quadratic objective function within the feasible region (the
optimality phase). The computations in both phases are performed by the same functions. The two-phase nature of the algorithm is reflected by changing the function being minimized from the sum of infeasibilities (the printed quantity
sInf; see
Section 9.1) to the quadratic objective function (the printed quantity
Objective; see
Section 9.1).
In general, an iterative process is required to solve a quadratic program. Given an iterate
in both the original variables
and the slack variables
, a new iterate
is defined by
where the
step length
is a non-negative scalar (the printed quantity
Step; see
Section 13), and
is called the
search direction. (For simplicity, we shall consider a typical iteration and avoid reference to the index of the iteration.) Once an iterate is feasible (i.e., satisfies the constraints), all subsequent iterates remain feasible.
11.2
Definition of the Working Set and Search Direction
At each iterate , a working set of constraints is defined to be a linearly independent subset of the constraints that are satisfied ‘exactly’ (to within the value of the optional parameter ). The working set is the current prediction of the constraints that hold with equality at a solution of the LP or QP problem. Let denote the number of constraints in the working set (including bounds), and let denote the associated by working set matrix consisting of the gradients of the working set constraints.
The search direction is defined so that constraints in the working set remain
unaltered for any value of the step length. It follows that
must satisfy the identity
This characterisation allows
to be computed using any
by
full-rank matrix
that spans the null space of
. (Thus,
and
.) The null space matrix
is defined from a sparse
factorization of part of
(see
(7) and
(8)). The direction
will satisfy
(4) if
where
is any
-vector.
The working set contains the constraints and a subset of the upper and lower bounds on the variables . Since the gradient of a bound constraint or is a vector of all zeros except for in position , it follows that the working set matrix contains the rows of and the unit rows associated with the upper and lower bounds in the working set.
The working set matrix
can be represented in terms of a certain column partition of the matrix
by (conceptually) partitioning the constraints
so that
where
is a square nonsingular basis and
,
and
are the basic, superbasic and nonbasic variables respectively. The nonbasic variables are equal to their upper or lower bounds at
, and the superbasic variables are independent variables that are chosen to improve the value of the current objective function. The number of superbasic variables is
(the printed quantity
nS; see
Section 9.1). Given values of
and
, the basic variables
are adjusted so that
satisfies
(6).
If
is a permutation matrix such that
, then
satisfies
where
is the identity matrix with the same number of columns as
.
The null space matrix
is defined from a sparse
factorization of part of
. In particular,
is maintained in ‘reduced gradient’ form, using the LUSOL package (see
Gill et al. (1991)) to maintain sparse
factors of the basis matrix
as the
partition changes. Given the permutation
, the null space basis is given by
This matrix is used only as an operator, i.e., it is never computed explicitly. Products of the form
and
are obtained by solving with
or
. This choice of
implies that
, the number of ‘degrees of freedom’ at
, is the same as
, the number of superbasic variables.
Let
and
denote the
reduced gradient and
reduced Hessian of the objective function:
where
is the objective gradient at
. Roughly speaking,
and
describe the first and second derivatives of an
-dimensional
unconstrained problem for the calculation of
. (The condition estimator of
is the quantity
condHz in the monitoring file output; see
Section 9.1.)
At each iteration, an upper triangular factor is available such that . Normally, is computed from at the start of the optimality phase and then updated as the QP working set changes. For efficiency, the dimension of should not be excessive (say, ). This is guaranteed if the number of nonlinear variables is ‘moderate’.
If the QP problem contains linear variables,
is positive semidefinite and
may be singular with at least one zero diagonal element. However, an inertia-controlling strategy is used to ensure that only the last diagonal element of
can be zero. (See
Gill et al. (1991) for a discussion of a similar strategy for indefinite quadratic programming.)
If the initial is singular, enough variables are fixed at their current value to give a nonsingular . This is equivalent to including temporary bound constraints in the working set. Thereafter, can become singular only when a constraint is deleted from the working set (in which case no further constraints are deleted until becomes nonsingular).
11.3
Main Iteration
If the reduced gradient is zero,
is a constrained stationary point on the working set. During the feasibility phase, the reduced gradient will usually be zero only at a vertex (although it may be zero elsewhere in the presence of constraint dependencies). During the optimality phase, a zero reduced gradient implies that
minimizes the quadratic objective function when the constraints in the working set are treated as equalities. At a constrained stationary point, Lagrange multipliers
are defined from the equations
A Lagrange multiplier,
, corresponding to an inequality constraint in the working set is said to be
optimal if
when the associated constraint is at its
upper bound, or if
when the associated constraint is at its
lower bound, where
depends on the value of the optional parameter
. If a multiplier is nonoptimal, the objective function (either the true objective or the sum of infeasibilities) can be reduced by continuing the minimization with the corresponding constraint excluded from the working set. (This step is sometimes referred to as ‘deleting’ a constraint from the working set.) If optimal multipliers occur during the feasibility phase but the sum of infeasibilities is nonzero, there is no feasible point and the function terminates immediately with
NE_NOT_REQUIRED_ACC.
The special form
(7) of the working set allows the multiplier vector
, the solution of
(10), to be written in terms of the vector
where
satisfies the equations
, and
denotes the basic elements of
. The elements of
are the Lagrange multipliers
associated with the equality constraints
. The vector
of nonbasic elements of
consists of the Lagrange multipliers
associated with the upper and lower bound constraints in the working set. The vector
of superbasic elements of
is the reduced gradient
in
(9). The vector
of basic elements of
is zero, by construction. (The Euclidean norm of
and the final values of
,
and
are the quantities
rgNorm,
Reduced Gradnt,
Obj Gradient and
Dual Activity in the monitoring file output; see
Section 13.)
If the reduced gradient is not zero, Lagrange multipliers need not be computed and the search direction is given by
(see
(8) and
(12)). The step length is chosen to maintain feasibility with respect to the satisfied constraints.
There are two possible choices for
, depending on whether or not
is singular. If
is nonsingular,
is nonsingular and
in
(5) is computed from the equations
where
is the reduced gradient at
. In this case,
is the minimizer of the objective function subject to the working set constraints being treated as equalities. If
is feasible,
is defined to be unity. In this case, the reduced gradient at
will be zero, and Lagrange multipliers are computed at the next iteration. Otherwise,
is set to
, the step to the ‘nearest’ constraint along
. This constraint is then added to the working set at the next iteration.
If
is singular, then
must also be singular, and an inertia-controlling strategy is used to ensure that only the last diagonal element of
is zero. (See
Gill et al. (1991) for a discussion of a similar strategy for indefinite quadratic programming.) In this case,
satisfies
which allows the objective function to be reduced by any step of the form
, where
. The vector
is a direction of unbounded descent for the QP problem in the sense that the QP objective is linear and decreases without bound along
. If no finite step of the form
(where
) reaches a constraint not in the working set, the QP problem is unbounded and the function terminates immediately with
NE_UNBOUNDED. Otherwise,
is defined as the maximum feasible step along
and a constraint active at
is added to the working set for the next iteration.
e04nqc makes explicit allowance for infeasible constraints. Infeasible linear constraints are detected first by solving a problem of the form
where
. This is equivalent to minimizing the sum of the general linear constraint violations subject to the simple bounds. (In the linear programming literature, the approach is often called
elastic programming.)
11.4
Miscellaneous
If the basis matrix is not chosen carefully, the condition of the null space matrix
in
(8) could be arbitrarily high. To guard against this, the function implements a ‘basis repair’ feature in which the LUSOL package (see
Gill et al. (1991)) is used to compute the rectangular factorization
returning just the permutation
that makes
unit lower triangular. The pivot tolerance is set to require
, and the permutation is used to define
in
(7). It can be shown that
is likely to be little more than unity. Hence,
should be well-conditioned
regardless of the condition of
. This feature is applied at the beginning of the optimality phase if a potential
ordering is known.
The EXPAND procedure (see
Gill et al. (1989)) is used to reduce the possibility of cycling at a point where the active constraints are nearly linearly dependent. Although there is no absolute guarantee that cycling will not occur, the probability of cycling is extremely small (see
Hall and McKinnon (1996)). The main feature of EXPAND is that the feasibility tolerance is increased at the start of every iteration. This allows a positive step to be taken at every iteration, perhaps at the expense of violating the bounds on
by a small amount.
Suppose that the value of the optional parameter is . Over a period of iterations (where is the value of the optional parameter ), the feasibility tolerance actually used by the function (i.e., the working feasibility tolerance) increases from to (in steps of ).
At certain stages the following ‘resetting procedure’ is used to remove small constraint infeasibilities. First, all nonbasic variables are moved exactly onto their bounds. A count is kept of the number of nontrivial adjustments made. If the count is nonzero, the basic variables are recomputed. Finally, the working feasibility tolerance is reinitialized to .
If a problem requires more than iterations, the resetting procedure is invoked and a new cycle of iterations is started. (The decision to resume the feasibility phase or optimality phase is based on comparing any constraint infeasibilities with .)
The resetting procedure is also invoked when the function reaches an apparently optimal, infeasible or unbounded solution, unless this situation has already occurred twice. If any nontrivial adjustments are made, iterations are continued.
The EXPAND procedure not only allows a positive step to be taken at every iteration, but also provides a potential choice of constraints to be added to the working set. All constraints at a distance (where ) along from the current point are then viewed as acceptable candidates for inclusion in the working set. The constraint whose normal makes the largest angle with the search direction is added to the working set. This strategy helps keep the basis matrix well-conditioned.
12
Optional Parameters
Several optional parameters in e04nqc define choices in the problem specification or the algorithm logic. In order to reduce the number of formal arguments of e04nqc these optional parameters have associated default values that are appropriate for most problems. Therefore, you need only specify those optional parameters whose values are to be different from their default values.
The remainder of this section can be skipped if you wish to use the default values for all optional parameters.
The following is a list of the optional parameters available. A full description of each optional parameter is provided in
Section 12.1.
Optional parameters may be specified by calling one, or any, of the functions
e04nrc,
e04nsc,
e04ntc and
e04nuc before a call to
e04nqc, but after a call to
e04npc.
e04nrc reads options from an external options file, with
Begin and
End as the first and last lines respectively and each intermediate line defining a single optional parameter. For example,
Begin
Print Level = 5
End
The call
e04nrc (ioptns, &state, &fail);
can then be used to read the file on
descriptor
ioptns.
NE_NOERROR
on successful exit.
e04nrc should be consulted for a full description of this method of supplying optional parameters.
e04nsc,
e04ntc or
e04nuc can be called to supply options directly, one call being necessary for each optional parameter.
e04nsc,
e04ntc or
e04nuc should be consulted for a full description of this method of supplying optional parameters.
All optional parameters not specified by you are set to their default values. Optional parameters specified by you are unaltered by e04nqc (unless they define invalid values) and so remain in effect for subsequent calls unless altered by you.
12.1
Description of the Optional Parameters
For each option, we give a summary line, a description of the optional parameter and details of constraints.
The summary line contains:
- the keywords;
- a parameter value,
where the letters , and denote options that take character, integer and real values respectively;
- the default value is used whenever the condition is satisfied and where the symbol is a generic notation for machine precision (see X02AJC);
- The variable holds the value of .
Keywords and character values are case and white space insensitive.
Optional parameters used to specify files (e.g., optional parameters
and
) have type Nag_FileID (see
Section 3.1.1 in the Introduction to the NAG Library CL Interface). This ID value must either be set to
(the default value) in which case there will be no output, or will be as returned by a call of
x04acc.
Check Frequency | | Default |
Every th iteration after the most recent basis factorization, a numerical test is made to see if the current solution satisfies the linear constraints . If the largest element of the residual vector is judged to be too large, the current basis is refactorized and the basic variables recomputed to satisfy the constraints more accurately. If , the value is used and effectively no checks are made.
is useful for debugging purposes, but otherwise this option should not be needed.
Crash Tolerance | | Default |
Note that these options do not apply when
(see
Section 5).
If
, an internal Crash procedure is used to select an initial basis from various rows and columns of the constraint matrix
. The value of
determines which rows and columns of
are initially eligible for the basis, and how many times the Crash procedure is called. Columns of
are used to pad the basis where necessary.
|
Meaning |
|
The initial basis contains only slack variables: . |
|
The Crash procedure is called once, looking for a triangular basis in all rows and columns of the matrix . |
|
The Crash procedure is called once, looking for a triangular basis in rows. |
|
The Crash procedure is called twice, treating linear equalities and linear inequalities separately. |
If , certain slacks on inequality rows are selected for the basis first. (If , numerical values are used to exclude slacks that are close to a bound.) The Crash procedure then makes several passes through the columns of , searching for a basis matrix that is essentially triangular. A column is assigned to ‘pivot’ on a particular row if the column contains a suitably large element in a row that has not yet been assigned. (The pivot elements ultimately form the diagonals of the triangular basis.) For remaining unassigned rows, slack variables are inserted to complete the basis.
The allows the Crash procedure to ignore certain ‘small’ nonzero elements in each column of . If is the largest element in column , other nonzeros in the column are ignored if . (To be meaningful, should be in the range .)
When , the basis obtained by the Crash procedure may not be strictly triangular, but it is likely to be nonsingular and almost triangular. The intention is to obtain a starting basis containing more columns of and fewer (arbitrary) slacks. A feasible solution may be reached sooner on some problems.
For example, suppose the first columns of form the matrix shown under ; i.e., a tridiagonal matrix with entries , , . To help the Crash procedure choose all columns for the initial basis, we would specify a of for some value of .
This special keyword may be used to reset all optional parameters to their default values.
(See
Section 3.1.1 in the Introduction to the NAG Library CL Interface for further information on NAG data types.)
Optional parameters
and
are similar to optional parameters
and
, but they record solution information in a manner that is more direct and more easily modified. A full description of information recorded in optional parameters
and
is given in
Gill et al. (2005a).
If , the last solution obtained will be output to the file .
If , the containing basis information will be read.
The file will usually have been output previously as a . The file will not be accessed if optional parameters or are specified.
This argument determines if (and when) elastic mode is to be started. Three elastic modes are available as follows:
|
Meaning |
|
Elastic mode is never invoked. e04nqc will terminate as soon as infeasibility is detected. There may be other points with significantly smaller sums of infeasibilities. |
|
Elastic mode is invoked only if the constraints are found to be infeasible (the default). If the constraints are infeasible, continue in elastic mode with the composite objective determined by the values of the optional parameters and . |
|
The iterations start and remain in elastic mode. This option allows you to minimize the composite objective function directly without first performing Phase 1 iterations.
The success of this option will depend critically on your choice of . If is sufficiently large and the constraints are feasible, the minimizer of the composite objective and the solution of the original problem are identical. However, if the is not sufficiently large, the minimizer of the composite function may be infeasible, even if a feasible point exists.
|
Elastic Objective | | Default |
This determines the form of the composite objective
in Phase 2 (
). Three types of composite objectives are available.
|
Meaning |
|
Include only the true objective in the composite objective. This option sets in the composite objective and allows e04nqc to ignore the elastic bounds and find a solution that minimizes subject to the non-elastic constraints. This option is useful if there are some ‘soft’ constraints that you would like to ignore if the constraints are infeasible. |
|
Use a composite objective defined with determined by the value of . This value is intended to be used in conjunction with . |
|
Include only the elastic variables in the composite objective. The elastics are weighted by . This choice minimizes the violations of the elastic variables at the expense of possibly increasing the true objective. This option can be used to find a point that minimizes the sum of the violations of a subset of constraints specified by the input array helast. |
Elastic Weight | | Default |
This defines the value of in the composite objective in Phase 2 ().
At each iteration of elastic mode, the composite objective is defined to be
where
for
,
for
, and
is the quadratic objective.
Note that the effect of is not disabled once a feasible point is obtained.
Expand Frequency | | Default |
This option is part of an anti-cycling procedure (see
Section 11.4) designed to allow progress even on highly degenerate problems.
The strategy is to force a positive step at every iteration, at the expense of violating the constraints by a small amount. Suppose that the value of the optional parameter is . Over a period of iterations, the feasibility tolerance actually used by e04nqc (i.e., the working feasibility tolerance) increases from to (in steps of ).
Increasing the value of helps reduce the number of slightly infeasible nonbasic variables (most of which are eliminated during the resetting procedure). However, it also diminishes the freedom to choose a large pivot element (see the description of the optional parameter ).
If , the value is used and effectively no anti-cycling procedure is invoked.
Factorization Frequency | | Default or |
If , at most basis changes will occur between factorizations of the basis matrix.
For LP problems, the basis factors are usually updated at every iteration. Higher values of may be more efficient on problems that are extremely sparse and well scaled.
For QP problems, fewer basis updates will occur as the solution is approached. The number of iterations between basis factorizations will therefore increase. During these iterations a test is made regularly according to the value of optional parameter to ensure that the linear constraints are satisfied. Occasionally, the basis will be refactorized before the limit of updates is reached. If , the default value is used.
Feasibility Tolerance | | Default |
A feasible problem is one in which all variables satisfy their upper and lower bounds to within the absolute tolerance . (This includes slack variables. Hence, the general constraints are also satisfied to within .)
e04nqc attempts to find a feasible solution before optimizing the objective function. If the sum of infeasibilities cannot be reduced to zero, the problem is assumed to be infeasible. Let sInf be the corresponding sum of infeasibilities. If sInf is quite small, it may be appropriate to raise by a factor of or . Otherwise, some error in the data should be suspected.
Note that if sInf is not small and you have not asked e04nqc to minimize the violations of the elastic variables (i.e., you have not specified ), there may be other points that have a significantly smaller sum of infeasibilities. e04nqc will not attempt to find the solution that minimizes the sum unless .
If the constraints and variables have been scaled (see the description of the optional parameter ), then feasibility is defined in terms of the scaled problem (since it is more likely to be meaningful).
Infinite Bound Size | | Default |
If , defines the ‘infinite’ bound in the definition of the problem constraints. Any upper bound greater than or equal to will be regarded as (and similarly any lower bound less than or equal to will be regarded as ). If , the default value is used.
Iterations Limit | | Default |
The value of specifies the maximum number of iterations allowed before termination. Setting and means that: the workspace needed to start solving the problem will be computed and printed; and feasibility and optimality will be checked. No iterations will be performed. If , the default value is used.
LU Density Tolerance | | Default
|
LU Singularity Tolerance | | Default
|
The density tolerance is used during factorization of the basis matrix. Columns of and rows of are formed one at a time, and the remaining rows and columns of the basis are altered appropriately. At any stage, if the density of the remaining matrix exceeds , the Markowitz strategy for choosing pivots is terminated. The remaining matrix is factored by a dense procedure. Raising the density tolerance towards may give slightly sparser factors, with a slight increase in factorization time.
If , defines the singularity tolerance used to guard against ill-conditioned basis matrices. After is refactorized, the diagonal elements of are tested as follows. If or , the th column of the basis is replaced by the corresponding slack variable. If , the default value is used.
LU Factor Tolerance | | Default |
LU Update Tolerance | | Default |
The values of
and
affect the stability and sparsity of the basis factorization
, during refactorization and updates respectively. The lower triangular matrix
is a product of matrices of the form
where the multipliers
will satisfy
. The default values of
and
usually strike a good compromise between stability and sparsity. They must satisfy
,
.
For large and relatively dense problems, (say) may give a useful improvement in stability without impairing sparsity to a serious degree.
For certain very regular structures (e.g., band matrices) it may be necessary to reduce
in order to achieve stability. For example, if the columns of
include a sub-matrix of the form
one should set both
and
to values in the range
.
LU Partial Pivoting | | Default |
The factorization implements a Markowitz-type search for pivots that locally minimize the fill-in subject to a threshold pivoting stability criterion. The default option is to use threshold partial pivoting. The optional parameters and are more expensive but more stable and better at revealing rank, as long as the is not too large (say ).
This option specifies the required direction of the optimization. It applies to both linear and nonlinear terms (if any) in the objective function. Note that if two problems are the same except that one minimizes
and the other maximizes
, their solutions will be the same but the signs of the dual variables
and the reduced gradients
(see
Section 11.3) will be reversed.
The optional parameter means ‘ignore the objective function, while finding a feasible point for the linear constraints’. It can be used to check that the constraints are feasible without altering the call to e04nqc.
New Basis File | | Default |
Backup Basis File | | Default |
Save Frequency | | Default |
(See
Section 3.1.1 in the Introduction to the NAG Library CL Interface for further information on NAG data types.)
Optional parameters and are sometimes referred to as basis maps. They contain the most compact representation of the state of each variable. They are intended for restarting the solution of a problem at a point that was reached by an earlier run. For nontrivial problems, it is advisable to save basis maps at the end of a run, in order to restart the run if necessary.
If , a basis map will be saved on file
every th iteration, where is the .
The first record of the file will contain the word PROCEEDING if the run is still in progress. A basis map will also be saved at the end of a run, with some other word indicating the final solution status.
If ,
is intended as a safeguard against losing the results of a long run. Suppose that a is being saved every () iterations, and that e04nqc is about to save such a basis at iteration . It is conceivable that the run may be interrupted during the next few milliseconds (in the middle of the save). In this case the Basis file will be corrupted and the run will have been essentially wasted.
To eliminate this risk, both a
and a
may be specified. The following would be suitable for the above example:
Backup Basis FileID1
New Basis FileID2
where
FileID1 and
FileID2 are returned by
x04acc.
The current basis will then be saved every iterations, first on FileID2 and then immediately on FileID1. If the run is interrupted at iteration during the save on FileID2, there will still be a usable basis on FileID1 (corresponding to iteration ).
Note that a new basis will be saved in at the end of a run if it terminates normally, but it will not be saved in . In the above example, if an optimum solution is found at iteration (or if the iteration limit is ), the final basis on FileID2 will correspond to iteration , but the last basis saved on FileID1 will be the one for iteration .
A full description of information recorded in
and
is given in
Gill et al. (2005a).
Optional parameter enables printing of each optional parameter specification as it is supplied. suppresses this printing.
Old Basis File | | Default |
(See
Section 3.1.1 in the Introduction to the NAG Library CL Interface for further information on NAG data types.)
If
, the basis maps information will be obtained from the file associated with ID
.
The file will usually have been output previously as a
or
.
A full description of information recorded in
and
is given in
Gill et al. (2005a).
The file will not be acceptable if the number of rows or columns in the problem has been altered.
Optimality Tolerance | | Default |
This is used to judge the size of the reduced gradients , where is the th component of the gradient, is the associated column of the constraint matrix , and is the set of dual variables.
By construction, the reduced gradients for basic variables are always zero. The problem will be declared optimal if the reduced gradients for nonbasic variables at their lower or upper bounds satisfy
respectively, and if
for superbasic variables.
In the above tests,
is a measure of the size of the dual variables. It is included to make the tests independent of a scale factor on the objective function. The quantity
actually used is defined by
so that only large scale factors are allowed for.
If the objective is scaled down to be very small, the optimality test reduces to comparing against .
Partial Price | | Default or |
This option is recommended for large FP or LP problems that have significantly more variables than constraints (i.e., ). It reduces the work required for each pricing operation (i.e., when a nonbasic variable is selected to enter the basis). If , all columns of the constraint matrix are searched. If , and are partitioned to give roughly equal segments , for (modulo ). If the previous pricing search was successful on , the next search begins on the segments and . If a reduced gradient is found that is larger than some dynamic tolerance, the variable with the largest such reduced gradient (of appropriate sign) is selected to enter the basis. If nothing is found, the search continues on the next segments , and so on. If , the default value is used.
Pivot Tolerance | | Default |
Broadly speaking, the pivot tolerance is used to prevent columns entering the basis if they would cause the basis to become almost singular.
When changes to for some search direction , a ‘ratio test’ determines which component of reaches an upper or lower bound first. The corresponding element of is called the pivot element. Elements of are ignored (and therefore cannot be pivot elements) if they are smaller than the pivot tolerance .
It is common for two or more variables to reach a bound at essentially the same time. In such cases, the optional parameter (say ) provides some freedom to maximize the pivot element and thereby improve numerical stability. Excessively small values of should therefore not be specified. To a lesser extent, the optional parameter (say ) also provides some freedom to maximize the pivot element. Excessively large values of should therefore not be specified.
(See
Section 3.1.1 in the Introduction to the NAG Library CL Interface for further information on NAG data types.)
If
, the following information is output to
during the solution of each problem:
-
–a listing of the optional parameters;
-
–some statistics about the problem;
-
–the amount of storage available for the factorization of the basis matrix;
-
–notes about the initial basis resulting from a Crash procedure or a Basis file;
-
–the iteration log;
-
–basis factorization statistics;
-
–the exit fail condition and some statistics about the solution obtained;
-
–the printed solution, if requested.
The last four items are described in
Sections 9 and
13. Further brief output may be directed to the
.
Print Frequency | | Default |
If , one line of the iteration log will be printed every th iteration. A value such as is suggested for those interested only in the final solution. If , the value of is used and effectively no checks are made.
This controls the amount of printing produced by
e04nqc as follows.
|
Meaning |
0 |
No output except error messages. If you want to suppress all output, set . |
|
The set of selected options, problem statistics, summary of the scaling procedure, information about the initial basis resulting from a Crash or a Basis file, a single line of output at each iteration (controlled by the optional parameter ), and the exit condition with a summary of the final solution. |
|
Basis factorization statistics. |
(See
Section 3.1.1 in the Introduction to the NAG Library CL Interface for further information on NAG data types.)
These files provide compatibility with commercial mathematical programming systems. The
from a previous run may be used as an
for a later run on the same problem. A full description of information recorded in
and
is given in
Gill et al. (2005a).
If , the final solution obtained will be output to file .
For linear programs, this format is compatible with various commercial systems.
If ,
the containing basis information will be read. The file will usually have been output previously as a . The file will not be accessed if is specified.
QPSolver Cholesky | | Default |
Specifies the active-set algorithm used to solve the quadratic program in Phase 2 (). holds the full Cholesky factor of the reduced Hessian . As the QP iterations proceed, the dimension of changes with the number of superbasic variables. If the number of superbasic variables needs to increase beyond the value of , the reduced Hessian cannot be stored and the solver switches to . The Cholesky solver is reactivated if the number of superbasics stabilizes at a value less than .
solves the QP using a quasi-Newton method. In this case, is the factor of a quasi-Newton approximate Hessian.
uses an active-set method similar to , but uses the conjugate-gradient method to solve all systems involving the reduced Hessian.
The Cholesky QP solver is the most robust, but may require a significant amount of computation if there are many superbasics.
The quasi-Newton QP solver does not require computation of the exact at the start of Phase 2 (). It may be appropriate when the number of superbasics is large but relatively few iterations are needed to reach a solution (e.g., if e04nqc is called with a Warm Start).
The conjugate-gradient QP solver is appropriate for problems with many degrees of freedom (say, more than superbasics).
Reduced Hessian Dimension | | Default |
This specifies that an by triangular matrix (to define the reduced Hessian according to ). is to be available for use by the Cholesky QP solver.
Scale Tolerance | | Default |
Three scale options are available as follows:
|
Meaning |
0 |
No scaling. This is recommended if it is known that and the constraint matrix never have very large elements (say, larger than ). |
1 |
The constraints and variables are scaled by an iterative procedure that attempts to make the matrix coefficients as close as possible to (see Fourer (1982)). This will sometimes improve the performance of the solution procedures. |
2 |
The constraints and variables are scaled by the iterative procedure. Also, a certain additional scaling is performed that may be helpful if the right-hand side or the solution is large. This takes into account columns of that are fixed or have positive lower bounds or negative upper bounds. |
Optional parameter
affects how many passes might be needed through the constraint matrix. On each pass, the scaling procedure computes the ratio of the largest and smallest nonzero coefficients in each column:
If
is less than
times its previous value, another scaling pass is performed to adjust the row and column scales. Raising
from
to
(say) usually increases the number of scaling passes through
. At most
passes are made. The value of
should lie in the range
.
causes the row scales and column scales to be printed to , if has been specified. The scaled matrix coefficients are , and the scaled bounds on the variables and slacks are , , where if .
This option determines if the final obtained solution is to be output to the
. Note that the option operates independently.
(See
Section 3.1.1 in the Introduction to the NAG Library CL Interface for further information on NAG data types.)
If , the final solution will be output to file
(whether optimal or not).
To see more significant digits in the printed solution, it will sometimes be useful to make
.
Summary Frequency | | Default |
(See
Section 3.1.1 in the Introduction to the NAG Library CL Interface for further information on NAG data types.)
If
, a brief log will be output to file
, including one line of information every
th iteration.
In an interactive environment, it is useful to direct this output to the terminal, to allow a run to be monitored online. (If something looks wrong, the run can be manually terminated.) Further details are given in
Section 13. If
, the value of
is used and effectively no checks are made.
Superbasics Limit | | Default |
This places a limit on the storage allocated for superbasic variables. Ideally, should be set slightly larger than the ‘number of degrees of freedom’ expected at an optimal solution.
For linear programs, an optimum is normally a basic solution with no degrees of freedom. (The number of variables lying strictly between their bounds is no more than , the number of general constraints.) The default value of is therefore .
For quadratic problems, the number of degrees of freedom is often called the ‘number of independent variables’. Normally, need not be greater than , where is the number of leading nonzero columns of . For many problems, may be considerably smaller than . This will save storage if is very large.
Normally e04nqc prints the options file as it is being read, and then prints a complete list of the available keywords and their final values. The optional parameter tells e04nqc not to print the full list.
System Information No | | Default |
This option prints additional information on the progress of major and minor iterations, and Crash statistics. See
Section 13.
If , some timing information will be output to the Print file, if .
Unbounded Step Size | | Default |
If , specifies the magnitude of the change in variables that will be considered a step to an unbounded solution. (Note that an unbounded solution can occur only when the Hessian is not positive definite.) If the change in during an iteration would exceed the value of , the objective function is considered to be unbounded below in the feasible region. If , the default value is used. See for the definition of .
13
Description of Monitoring Information
This section describes the intermediate printout and final printout which constitutes the monitoring information produced by e04nqc. (See also the description of the optional parameters and .) You can control the level of printed output.
13.1
Crash Statistics
When
,
and
has been specified, the following lines of intermediate printout (less than
characters) are produced on the unit number specified by optional parameter
whenever
(see
Section 5). They refer to the number of columns selected by the Crash procedure during each of several passes through
, whilst searching for a triangular basis matrix.
Label |
Description |
Slacks |
is the number of slacks selected initially.
|
Free cols |
is the number of free columns in the basis, including those whose bounds are rather far apart.
|
Preferred |
is the number of ‘preferred’ columns in the basis (i.e., for some ). It will be a subset of the columns for which was specified. |
Unit |
is the number of unit columns in the basis.
|
Double |
is the number of double columns in the basis.
|
Triangle |
is the number of triangular columns in the basis.
|
Pad |
is the number of slacks used to pad the basis (to make it a nonsingular triangle).
|
13.2
Basis Factorization Statistics
When
and
, the first seven items of intermediate printout in the list below are produced on the unit number specified by optional parameter
whenever the matrix
or
is factorized. Gaussian elimination is used to compute an
factorization of
or
, where
is a lower triangular matrix and
is an upper triangular matrix for some permutation matrices
and
. The factorization is stabilized in the manner described under the optional parameter
. In addition, if
has been specified, the entries from
Elems onwards are also output.
Label |
Description |
Factor |
the number of factorizations since the start of the run. |
Demand |
a code giving the reason for the present factorization, as follows:
Code |
Meaning |
0 |
First factorization. |
1 |
The number of updates reached the . |
2 |
The nonzeros in the updated factors have increased significantly. |
7 |
Not enough storage to update factors. |
10 |
Row residuals are too large (see the description of the optional parameter ). |
11 |
Ill-conditioning has caused inconsistent results. |
|
Itn |
is the current minor iteration number. |
Nonlin |
is the number of nonlinear variables in the current basis . |
Linear |
is the number of linear variables in . |
Slacks |
is the number of slack variables in . |
B, BR, BS or BT factorize |
is the type of factorization.
B |
periodic factorization of the basis . |
BR |
more careful rank-revealing factorization of using threshold rook pivoting. This occurs mainly at the start, if the first basis factors seem singular or ill-conditioned. Followed by a normal B factorize. |
BS |
is factorized to choose a well-conditioned from the current . Followed by a normal B factorize. |
BT |
same as BS except the current is tried first and accepted if it appears to be not much more ill-conditioned than after the previous BS factorize. |
|
m |
is the number of rows in or . |
n |
is the number of columns in or . Preceded by ‘=’ or ‘>’ respectively. |
Elems |
is the number of nonzero elements in or . |
Amax |
is the largest nonzero in or . |
Density |
is the percentage nonzero density of or . |
Merit/MerRP/MerCP |
Merit is the average Markowitz merit count for the elements chosen to be the diagonals of . Each merit count is defined to be where and are the number of nonzeros in the column and row containing the element at the time it is selected to be the next diagonal. Merit is the average of n such quantities. It gives an indication of how much work was required to preserve sparsity during the factorization. If or has been selected, this heading is changed to MerCP, respectively MerRP. |
lenL |
is the number of nonzeros in . |
L+U |
is the number of nonzeros representing the basis factors and . Immediately after a basis factorization , this is lenL+lenU, the number of subdiagonal elements in the columns of a lower triangular matrix and the number of diagonal and superdiagonal elements in the rows of an upper-triangular matrix. Further nonzeros are added to L when various columns of are later replaced. As columns of are replaced, the matrix is maintained explicitly (in sparse form). The value of L will steadily increase, whereas the value of U may fluctuate up or down. Thus the value of L+U may fluctuate up or down (in general, it will tend to increase). |
Cmpressns |
is the number of times the data structure holding the partially factored matrix needed to be compressed to recover unused storage. Ideally this number should be zero. If it is more than or , the amount of workspace available to e04nqc should be increased for efficiency. |
Incres |
is the percentage increase in the number of nonzeros in and relative to the number of nonzeros in or . |
Utri |
is the number of triangular rows of or at the top of . |
lenU |
the number of nonzeros in , including its diagonals. |
Ltol |
is the largest subdiagonal element allowed in . This is the specified or a smaller value that is currently being used for greater stability. |
Umax |
the maximum nonzero element in . |
Ugrwth |
is the ratio , which ideally should not be substantially larger than or . If it is orders of magnitude larger, it may be advisable to reduce the to , , or , say (but bigger than ).
As long as Lmax is not large (say or less), gives an estimate of the condition number . If this is extremely large, the basis is nearly singular. Slacks are used to replace suspect columns of and the modified basis is refactored. |
Ltri |
is the number of triangular columns of or at the left of . |
dense1 |
is the number of columns remaining when the density of the basis matrix being factorized reached . |
Lmax |
is the actual maximum subdiagonal element in (bounded by Ltol). |
Akmax |
is the largest nonzero generated at any stage of the factorization. (Values much larger than Amax indicate instability.) Akmax is not printed if is selected. |
Agrwth |
is the ratio . Values much larger than (say) indicate instability. Agrwth is not printed if is selected. |
bump |
is the size of the block to be factorized nontrivially after the triangular rows and columns of or have been removed. |
dense2 |
is the number of columns remaining when the density of the basis matrix being factorized reached . (The Markowitz pivot strategy searches fewer columns at that stage.) |
DUmax |
is the largest diagonal of . |
DUmin |
is the smallest diagonal of . |
condU |
the ratio , which estimates the condition number of (and of if Ltol is less than , say). |
13.3
Basis Map
When
and
, the following lines of intermediate printout (less than
characters) are produced on the unit number specified by optional parameter
. They refer to the elements of the
names
array (see
Section 5).
Label |
Description |
Name |
gives the name for the problem (blank if problem unnamed).
|
Infeasibilities |
gives the number of infeasibilities. Printed only if the final point is infeasible. |
Objective Value |
gives the objective value at the final point (or the value of the sum of infeasibilities). Printed only if the final point is feasible. |
Status |
gives the exit status for the problem (i.e., Optimal soln, Weak soln, Unbounded, Infeasible, Excess itns, Error condn or Feasble soln) followed by details of the direction of the optimization (i.e., (Min) or (Max)).
|
Iteration |
gives the iteration number when the file was created. |
Superbasics |
gives the number of superbasic variables. |
Objective |
gives the name of the free row for the problem (blank if objective unnamed).
|
RHS |
gives the name of the constraint right-hand side for the problem (blank if objective unnamed).
|
Ranges |
gives the name of the ranges for the problem (blank if objective unnamed).
|
Bounds |
gives the name of the bounds for the problem (blank if objective unnamed).
|
13.4
Solution Output
At the end of a run, the final solution will be output to the Print file. Some header information appears first to identify the problem and the final state of the optimization procedure. A ROWS section and a COLUMNS section then follow, giving one line of information for each row and column.
13.4.1
The ROWS section
General constraints take the form
. The
th constraint is therefore of the form
where
is the
th row of
.
Internally, the constraints take the form
, where
is the set of slack variables (which happen to satisfy the bounds
). For the
th constraint, the slack variable
is directly available, and it is sometimes convenient to refer to its state. It should satisfy
. A fullstop (.) is printed for any numerical value that is exactly zero.
Label |
Description |
Number |
is the value of . (This is used internally to refer to in the intermediate output.)
|
Row |
gives the name of .
|
State |
the state of (the state of relative to the bounds and ). The various states possible are as follows:
LL |
is nonbasic at its lower limit, . |
UL |
is nonbasic at its upper limit, . |
EQ |
is nonbasic and fixed at the value . |
FR |
is nonbasic and currently zero, even though it is free to take any value between its bounds and . |
BS |
is basic. |
SBS |
is superbasic. |
A key is sometimes printed before State.
Note that unless the optional parameter is specified, the tests for assigning a key are applied to the variables of the scaled problem.
A |
Alternative optimum possible. The variable is nonbasic, but its reduced gradient is essentially zero. This means that if the variable were allowed to start moving away from its bound, there would be no change in the value of the objective function. The values of the other free variables might change, giving a genuine alternative solution. However, if there are any degenerate variables (labelled D), the actual change might prove to be zero, since one of them could encounter a bound immediately. In either case, the values of the Lagrange multipliers might also change.
|
D |
Degenerate. The variable is basic or superbasic, but it is equal (or very close) to one of its bounds.
|
I |
Infeasible. The variable is basic or superbasic and is currently violating one of its bounds by more than the value of the .
|
N |
Not precisely optimal. If the slack is superbasic, the dual variable is not sufficiently small, as measured by the . If the slack is nonbasic, is not sufficiently positive or negative. If a loose has been used, or if iterations were terminated before optimality, this key might be helpful in deciding whether or not to restart the run.
|
|
Activity |
is the value of at the final iterate. |
Slack Activity |
is the value by which the row differs from its nearest bound. (For the free row (if any), it is set to Activity.)
|
Lower Limit |
is , the lower bound specified for the variable . None indicates that . |
Upper Limit |
is , the upper bound specified for the variable . None indicates that . |
Dual Activity |
is the value of the dual variable (the Lagrange multiplier for ; see Section 11.3). For FP problems, is set to zero.
|
i |
gives the index of the th row.
|
13.4.2
The COLUMNS Section
Let the
th component of
be the variable
and assume that it satisfies the bounds
. A fullstop (.) is printed for any numerical value that is exactly zero.
Label |
Description |
Number |
is the column number . (This is used internally to refer to in the intermediate output.)
|
Column |
gives the name of .
|
State |
the state of relative to the bounds and . The various states possible are as follows:
LL |
is nonbasic at its lower limit, . |
UL |
is nonbasic at its upper limit, . |
EQ |
is nonbasic and fixed at the value . |
FR |
is nonbasic and currently zero, even though it is free to take any value between its bounds and . |
BS |
is basic. |
SBS |
is superbasic. |
A key is sometimes printed before State.
Note that unless the optional parameter is specified, the tests for assigning a key are applied to the variables of the scaled problem.
A |
Alternative optimum possible. The variable is nonbasic, but its reduced gradient is essentially zero. This means that if the variable were allowed to start moving away from its bound, there would be no change in the value of the objective function. The values of the other free variables might change, giving a genuine alternative solution. However, if there are any degenerate variables (labelled D), the actual change might prove to be zero, since one of them could encounter a bound immediately. In either case, the values of the Lagrange multipliers might also change.
|
D |
Degenerate. The variable is basic or superbasic, but it is equal (or very close) to one of its bounds.
|
I |
Infeasible. The variable is basic or superbasic and is currently violating one of its bounds by more than the value of the .
|
N |
Not precisely optimal. If the slack is superbasic, the dual variable is not sufficiently small, as measured by the . If the slack is nonbasic, is not sufficiently positive or negative. If a loose has been used, or if iterations were terminated before optimality, this key might be helpful in deciding whether or not to restart the run.
|
|
Activity |
is the value of at the final iterate.
|
Obj Gradient |
is the value of at the final iterate. For FP problems, is set to zero.
|
Lower Limit |
is the lower bound specified for the variable. None indicates that . |
Upper Limit |
is the upper bound specified for the variable. None indicates that . |
Reduced Gradnt |
is the value of at the final iterate (see Section 11.3). For FP problems, is set to zero.
|
m + j |
is the value of .
|
Note: if two problems are the same except that one minimizes and the other maximizes , their solutions will be the same but the signs of the dual variables and the reduced gradients will be reversed.
13.5
The Solution File
If ,
the information contained in a printed solution may also be output to the relevant file (which may be the Print file if so desired). Infinite Upper and Lower limits appear as rather than None.
The maximum line length is characters.
A Solution file is intended to be read from disk by a self-contained program that extracts and saves certain values as required for possible further computation. Typically the first
lines would be ignored.
The end of the ROWS section is marked by a line that starts with a
and is otherwise blank. If this and the next
lines are skipped, the COLUMNS section (see
Section 13.4.2) can then be read under the same format.
13.6
The Summary File
If , certain brief information will be output to file. A disk file should be used to retain a concise log of each run if desired. (A is more easily perused than the associated ).
The following information is included:
-
1.The optional parameters supplied via the option setting functions, if any;
-
2.The Basis file loaded, if any;
-
3.The status of the solution after each basis factorization (whether feasible; the objective value; the number of function calls so far);
-
4.The same information every th iteration, where is the specified ;
-
5.Warnings and error messages;
-
6.The exit condition and a summary of the final solution.
Item
4 is preceded by a blank line, but item
5 is not.
The meaning of the printout for linear constraints is the same as that given above for variables, with ‘variable’ replaced by ‘constraint’,
replaced by
,
replaced by
,
and
are replaced by
and
respectively, and with the following change in the heading:
Constrnt |
gives the name of the linear constraint.
|
Note that movement off a constraint (as opposed to a variable moving away from its bound) can be interpreted as allowing the entry in the Residual column to become positive.
Numerical values are output with a fixed number of digits; they are not guaranteed to be accurate to this precision.