Integer, Intent (In)	::	ip, irank
Integer, Intent (Inout)	::	ifail
Real (Kind=nag_wp), Intent (In)	::	b(ip), cov(ip(ip+1)/2), p(ipip+2*ip), f(ip), tol
Real (Kind=nag_wp), Intent (Out)	::	stat, sestat, t, wk(ip)
Logical, Intent (Out)	::	est

C Header Interface

#include <nag.h>

void	g02dnf_ (const Integer ip, const Integer irank, const double b[], const double cov[], const double p[], const double f[], logical est, double stat, double sestat, double t, const double tol, double wk[], Integer ifail)

The routine may be called by the names g02dnf or nagf_correg_linregm_estfunc.

3 Description

g02dnf computes the estimates of an estimable function for a general linear regression model which is not of full rank. It is intended for use after a call to g02daf or g02ddf. An estimable function is a linear combination of the parameters such that it has a unique estimate. For a full rank model all linear combinations of parameters are estimable.

In the case of a model not of full rank the routines use a singular value decomposition (SVD) to find the parameter estimates,

\hat{β}

, and their variance-covariance matrix. Given the upper triangular matrix

R

obtained from the

Q R

decomposition of the independent variables the SVD gives

R = Q_{*} (\begin{array}{l} D & 0 \\ 0 & 0 \end{array}) P^{T},

where

D

is a

k \times k

diagonal matrix with nonzero diagonal elements,

k

being the rank of

R

, and

Q_{*}

and

P

are

p \times p

orthogonal matrices. This gives the solution

\hat{β} = P_{1} D^{- 1} Q_{*_{1}}^{T} c_{1},

P_{1}

being the first

k

columns of

P

, i.e.,

P = (P_{1} P_{0})

Q_{*_{1}}

being the first

k

columns of

Q_{*}

, and

c_{1}

being the first

p

elements of

c

Details of the SVD are made available in the form of the matrix

P^{*}

P^{*} = (\begin{matrix} D^{- 1} P_{1}^{T} \\ P_{0}^{T} \end{matrix}),

as given by g02daf and g02ddf.

A linear function of the parameters,

F = f^{T} β

, can be tested to see if it is estimable by computing

ζ = P_{0}^{T} f

. If

ζ

is zero, then the function is estimable; if not, the function is not estimable. In practice

| ζ |

is tested against some small quantity

η

Given that

F

is estimable it can be estimated by

f^{T} \hat{β}

and its standard error calculated from the variance-covariance matrix of

\hat{β}

C_{β}

, as

se (F) = \sqrt{f^{T} C_{β} f} .

Also a

t

-statistic,

t = \frac{f^{T} \hat{β}}{se (F)},

can be computed. The

t

-statistic will have a Student's

t

-distribution with degrees of freedom as given by the degrees of freedom for the residual sum of squares for the model.

4 References

Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

Hammarling S (1985) The singular value decomposition in multivariate statistics SIGNUM Newsl. 20(3) 2–25

Searle S R (1971) Linear Models Wiley

5 Arguments

1: $ip$ – Integer Input

On entry:

p

, the number of terms in the linear model.

Constraint:

ip \geq 1

2: $irank$ – Integer Input

On entry:

k

, the rank of the independent variables.

Constraint:

1 \leq irank \leq ip

3: $b (ip)$ – Real (Kind=nag_wp) array Input

On entry: the ip values of the estimates of the parameters of the model,

\hat{β}

4: $cov (ip \times (ip + 1) / 2)$ – Real (Kind=nag_wp) array Input

On entry: the upper triangular part of the variance-covariance matrix of the ip parameter estimates given in b. They are stored packed by column, i.e., the covariance between the parameter estimate given in

b (i)

and the parameter estimate given in

b (j)

j \geq i

, is stored in

cov ((j \times (j - 1) / 2 + i))

5: $p (ip \times ip + 2 \times ip)$ – Real (Kind=nag_wp) array Input

On entry: as returned by g02daf and g02ddf.

6: $f (ip)$ – Real (Kind=nag_wp) array Input

On entry:

f

, the linear function to be estimated.

7: $est$ – Logical Output

On exit: indicates if the function was estimable.

$est = .TRUE.$: The function is estimable.
$est = .FALSE.$: The function is not estimable and stat, sestat and t are not set.

8: $stat$ – Real (Kind=nag_wp) Output

On exit: if

est = .TRUE.

, stat contains the estimate of the function,

f^{T} \hat{β}

9: $sestat$ – Real (Kind=nag_wp) Output

On exit: if

est = .TRUE.

, sestat contains the standard error of the estimate of the function,

se (F)

10: $t$ – Real (Kind=nag_wp) Output

On exit: if

est = .TRUE.

, t contains the

t

-statistic for the test of the function being equal to zero.

11: $tol$ – Real (Kind=nag_wp) Input

On entry:

η

, the tolerance value used in the check for estimability.

tol \leq 0.0

then

\sqrt{ε}

, where

ε

is the machine precision, is used instead.

12: $wk (ip)$ – Real (Kind=nag_wp) array Workspace

13: $ifail$ – Integer Input/Output

On entry: ifail must be set to

0

−1

1

to set behaviour on detection of an error; these values have no effect when no error is detected.

A value of

0

causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of

−1

means that an error message is printed while a value of

1

means that it is not.

If halting is not appropriate, the value

−1

1

is recommended. If message printing is undesirable, then the value

1

is recommended. Otherwise, the value

−1

is recommended since useful values can be provided in some output arguments even when

ifail \neq 0

on exit. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit:

ifail = 0

unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

−1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

Note: in some cases g02dnf may return useful information.

$ifail = 1$: On entry, $ip = ⟨ value ⟩$ .
Constraint: $ip \geq 1$ .

On entry, $irank = ⟨ value ⟩$ .
Constraint: $irank \geq 1$ .

On entry, $irank = ⟨ value ⟩$ and $ip = ⟨ value ⟩$ .
Constraint: $irank \leq ip$ .

$ifail = 2$: On entry, $irank = ip$ , i.e., model of full rank. In this case est is returned as true and all statistics are calculated.

$ifail = 3$: Standard error of statistic $= 0.0$ ; this may be due to rounding errors if the standard error is very small or due to mis-specified inputs cov and f.

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The computations are believed to be stable.

8 Parallelism and Performance

g02dnf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The value of estimable functions is independent of the solution chosen from the many possible solutions. While g02dnf may be used to estimate functions of the parameters of the model as computed by g02dkf,

β_{c}

, these must be expressed in terms of the original parameters,

β

. The relation between the two sets of parameters may not be straightforward.

10 Example

Data from an experiment with four treatments and three observations per treatment are read in. A model, with a mean term, is fitted by g02daf. The number of functions to be tested is read in, then the linear functions themselves are read in and tested with g02dnf. The results of g02dnf are printed.

g02dn: FL CL CPP AD

NAG FL Interfaceg02dnf (linregm_​estfunc)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG FL Interface
g02dnf (linregm_estfunc)