Integer, Intent (In)	::	ndim, npts, nrand, itrans
Integer, Intent (Inout)	::	ifail
Real (Kind=nag_wp), External	::	f
Real (Kind=nag_wp), Intent (Inout)	::	vk(ndim)
Real (Kind=nag_wp), Intent (Out)	::	res, err
External	::	region

C Header Interface

#include <nag.h>

void

d01gcf_ (const Integer *ndim,
double (NAG_CALL *f)(const Integer *ndim, const double x[]),
void (NAG_CALL *region)(const Integer *ndim, const double x[], const Integer *j, double *c, double *d),
const Integer *npts, double vk[], const Integer *nrand, const Integer *itrans, double *res, double *err, Integer *ifail)

The routine may be called by the names d01gcf or nagf_quad_md_numth.

3 Description

d01gcf calculates an approximation to the integral

I = \int_{c_{1}}^{d_{1}} d x_{1}, \dots, \int_{c_{n}}^{d_{n}} d x_{n} f (x_{1}, x_{2}, \dots, x_{n})

(1)

using the Korobov–Conroy number theoretic method (see Korobov (1957), Korobov (1963) and Conroy (1967)). The region of integration defined in (1) is such that generally

c_{i}

and

d_{i}

may be functions of

x_{1}, x_{2}, \dots, x_{i - 1}

, for

i = 2, 3, \dots, n

, with

c_{1}

and

d_{1}

constants. The integral is first of all transformed to an integral over the

n

-cube

{[0, 1]}^{n}

by the change of variables

x_{i} = c_{i} + (d_{i} - c_{i}) y_{i}, i = 1, 2, \dots, n .

The method then uses as its basis the number theoretic formula for the

n

-cube,

{[0, 1]}^{n}

\int_{0}^{1} d x_{1} \dots \int_{0}^{1} d x_{n} g (x_{1}, x_{2}, \dots, x_{n}) = \frac{1}{p} \sum_{k = 1}^{p} g ({k \frac{a_{1}}{p}}, \dots, {k \frac{a_{n}}{p}}) - E

(2)

where

{x}

denotes the fractional part of

x

a_{1}, a_{2}, \dots, a_{n}

are the so-called optimal coefficients,

E

is the error, and

p

is a prime integer. (It is strictly only necessary that

p

be relatively prime to all

a_{1}, a_{2}, \dots, a_{n}

and is in fact chosen to be even for some cases in Conroy (1967).) The method makes use of properties of the Fourier expansion of

g (x_{1}, x_{2}, \dots, x_{n})

which is assumed to have some degree of periodicity. Depending on the choice of

a_{1}, a_{2}, \dots, a_{n}

the contributions from certain groups of Fourier coefficients are eliminated from the error,

E

. Korobov shows that

a_{1}, a_{2}, \dots, a_{n}

can be chosen so that the error satisfies

E \leq C K p^{- α} \ln^{α β} p

(3)

where

α

and

C

are real numbers depending on the convergence rate of the Fourier series,

β

is a constant depending on

n

, and

K

is a constant depending on

α

and

n

. There are a number of procedures for calculating these optimal coefficients. Korobov imposes the constraint that

a_{1} = 1 and a_{i} = a^{i - 1} (\mod p)

(4)

and gives a procedure for calculating the argument,

a

, to satisfy the optimal conditions.

In this routine the periodisation is achieved by the simple transformation

x_{i} = y_{i}^{2} (3 - 2 y_{i}), i = 1, 2, \dots, n .

More sophisticated periodisation procedures are available but in practice the degree of periodisation does not appear to be a critical requirement of the method.

An easily calculable error estimate is not available apart from repetition with an increasing sequence of values of

p

which can yield erratic results. The difficulties have been studied by Cranley and Patterson (1976) who have proposed a Monte Carlo error estimate arising from converting (2) into a stochastic integration rule by the inclusion of a random origin shift which leaves the form of the error (3) unchanged; i.e., in the formula (2),

{k \frac{a_{i}}{p}}

is replaced by

{α_{i} + k \frac{a_{i}}{p}}

, for

i = 1, 2, \dots, n

, where each

α_{i}

, is uniformly distributed over

[0, 1]

. Computing the integral for each of a sequence of random vectors

α

allows a ‘standard error’ to be estimated.

This routine provides built-in sets of optimal coefficients, corresponding to six different values of

p

. Alternatively, the optimal coefficients may be supplied by you. Routines d01gyf and d01gzf compute the optimal coefficients for the cases where

p

is a prime number or

p

is a product of two primes, respectively.

4 References

Conroy H (1967) Molecular Shroedinger equation VIII. A new method for evaluting multi-dimensional integrals J. Chem. Phys. 47 5307–5318

Cranley R and Patterson T N L (1976) Randomisation of number theoretic methods for mulitple integration SIAM J. Numer. Anal. 13 904–914

Korobov N M (1957) The approximate calculation of multiple integrals using number theoretic methods Dokl. Acad. Nauk SSSR 115 1062–1065

Korobov N M (1963) Number Theoretic Methods in Approximate Analysis Fizmatgiz, Moscow

5 Arguments

1: $ndim$ – Integer Input

On entry:

n

, the number of dimensions of the integral.

Constraint:

1 \leq ndim \leq 20

2: $f$ – real (Kind=nag_wp) Function, supplied by the user. External Procedure

f must return the value of the integrand

f

at a given point.

The specification of f is:

Fortran Interface

Function f (

ndim, x)

Real (Kind=nag_wp)	::	f
Integer, Intent (In)	::	ndim
Real (Kind=nag_wp), Intent (In)	::	x(ndim)

C Header Interface

double

f (const Integer *ndim, const double x[])

1: $ndim$ – Integer Input: On entry: $n$ , the number of dimensions of the integral.
2: $x (ndim)$ – Real (Kind=nag_wp) array Input: On entry: the coordinates of the point at which the integrand $f$ must be evaluated.

f must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d01gcf is called. Arguments denoted as Input must not be changed by this procedure.

Note: f should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d01gcf. If your code inadvertently does return any NaNs or infinities, d01gcf is likely to produce unexpected results.

3: $region$ – Subroutine, supplied by the user. External Procedure

region must evaluate the limits of integration in any dimension.

The specification of region is:

Fortran Interface

Subroutine region (

ndim, x, j, c, d)

Integer, Intent (In)	::	ndim, j
Real (Kind=nag_wp), Intent (In)	::	x(ndim)
Real (Kind=nag_wp), Intent (Out)	::	c, d

C Header Interface

void	region (const Integer ndim, const double x[], const Integer j, double c, double d)

1: $ndim$ – Integer Input: On entry: $n$ , the number of dimensions of the integral.
2: $x (ndim)$ – Real (Kind=nag_wp) array Input: On entry: $x (1), \dots, x (j - 1)$ contain the current values of the first $(j - 1)$ variables, which may be used if necessary in calculating $c_{j}$ and $d_{j}$ .
3: $j$ – Integer Input: On entry: the index $j$ for which the limits of the range of integration are required.
4: $c$ – Real (Kind=nag_wp) Output: On exit: the lower limit $c_{j}$ of the range of $x_{j}$ .
5: $d$ – Real (Kind=nag_wp) Output: On exit: the upper limit $d_{j}$ of the range of $x_{j}$ .

region must either be a module subprogram USEd by, or declared as EXTERNAL in, the (sub)program from which d01gcf is called. Arguments denoted as Input must not be changed by this procedure.

Note: region should not return floating-point NaN (Not a Number) or infinity values, since these are not handled by d01gcf. If your code inadvertently does return any NaNs or infinities, d01gcf is likely to produce unexpected results.

4: $npts$ – Integer Input

On entry: the Korobov rule to be used. There are two alternatives depending on the value of npts.

(i) $1 \leq npts \leq 6$ .
In this case one of six preset rules is chosen using $2129$ , $5003$ , $10007$ , $20011$ , $40009$ or $80021$ points depending on the respective value of npts being $1$ , $2$ , $3$ , $4$ , $5$ or $6$ .
(ii) $npts > 6$ .
npts is the number of actual points to be used with corresponding optimal coefficients supplied in the array vk.

Constraint:

npts \geq 1

5: $vk (ndim)$ – Real (Kind=nag_wp) array Input/Output

On entry: if

npts > 6

, vk must contain the

n

optimal coefficients (which may be calculated using d01gyf or d01gzf).

npts \leq 6

, vk need not be set.

On exit: if

npts > 6

, vk is unchanged.

npts \leq 6

, vk contains the

n

optimal coefficients used by the preset rule.

6: $nrand$ – Integer Input

On entry: the number of random samples to be generated in the error estimation (generally a small value, say

3

5

, is sufficient). The total number of integrand evaluations will be

nrand \times npts

Constraint:

nrand \geq 1

7: $itrans$ – Integer Input

On entry: indicates whether the periodising transformation is to be used.

$itrans ='0'$: The transformation is to be used.
$itrans \neq'0'$: The transformation is to be suppressed (to cover cases where the integrand may already be periodic or where you want to specify a particular transformation in the definition of f).

Suggested value:

itrans ='0'

8: $res$ – Real (Kind=nag_wp) Output

On exit: the approximation to the integral

I

9: $err$ – Real (Kind=nag_wp) Output

On exit: the standard error as computed from nrand sample values. If

nrand = 1

, err contains zero.

10: $ifail$ – Integer Input/Output

On entry: ifail must be set to

0

−1

1

to set behaviour on detection of an error; these values have no effect when no error is detected.

A value of

0

causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of

−1

means that an error message is printed while a value of

1

means that it is not.

If halting is not appropriate, the value

−1

1

is recommended. If message printing is undesirable, then the value

1

is recommended. Otherwise, the value

0

is recommended. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit:

ifail = 0

unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

−1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 1$: On entry, $ndim = ⟨ value ⟩$ .
Constraint: $1 \leq ndim \leq 20$ .

$ifail = 2$: On entry, $npts = ⟨ value ⟩$ .
Constraint: $npts \geq 1$ .

$ifail = 3$: On entry, $nrand = ⟨ value ⟩$ .
Constraint: $nrand \geq 1$ .

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

An estimate of the absolute standard error is given by the value, on exit, of err.

8 Parallelism and Performance

d01gcf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The time taken by d01gcf will be approximately proportional to

nrand \times p

, where

p

is the number of points used.

The exact values of res and err on return will depend (within statistical limits) on the sequence of random numbers generated within d01gcf by calls to g05saf. Separate runs will produce identical answers.