NAG CL Interface
c09fac (dim3_​sngl_​fwd)

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

1: $\mathbf{m}$ – Integer Input

On entry: the number of rows of each two-dimensional frame.

Constraint: this must be the same as the value m passed to the initialization function c09acc.

2: $\mathbf{n}$ – Integer Input

On entry: the number of columns of each two-dimensional frame.

Constraint: this must be the same as the value n passed to the initialization function c09acc.

3: $\mathbf{fr}$ – Integer Input

On entry: the number of two-dimensional frames.

Constraint: this must be the same as the value fr passed to the initialization function c09acc.

4: $\mathbf{a}\left[\mathit{dim}\right]$ – const double Input

Note: the dimension, dim, of the array a must be at least $\mathbf{lda}\times \mathbf{sda}\times \mathbf{fr}$.

On entry: the $m\times n\times \mathit{fr}$ three-dimensional input data $A$, where $A_{ijk}$ is stored in $\mathbf{a}\left[\left(k-1\right)\times \mathbf{lda}\times \mathbf{sda}+\left(j-1\right)\times \mathbf{lda}+i-1\right]$.

5: $\mathbf{lda}$ – Integer Input

On entry: the stride separating row elements of each of the sets of frame coefficients in the three-dimensional data stored in a.

Constraint: $\mathbf{lda}\ge \mathbf{m}$.

6: $\mathbf{sda}$ – Integer Input

On entry: the stride separating corresponding coefficients of consecutive frames in the three-dimensional data stored in a.

Constraint: $\mathbf{sda}\ge \mathbf{n}$.

7: $\mathbf{lenc}$ – Integer Input

On entry: the dimension of the array c.

Constraint: $\mathbf{lenc}\ge n_{\mathrm{ct}}$, where $n_{\mathrm{ct}}$ is the total number of wavelet coefficients, as returned by c09acc.

8: $\mathbf{c}\left[\mathbf{lenc}\right]$ – double Output

On exit: the coefficients of the discrete wavelet transform. If you need to access or modify the approximation coefficients or any specific set of detail coefficients then the use of c09fyc or c09fzc is recommended. For completeness the following description provides details of precisely how the coefficients are stored in c but this information should only be required in rare cases.

The $8$ sets of coefficients are stored in the following order: approximation coefficients (LLL) first, followed by $7$ sets of detail coefficients: LLH, LHL, LHH, HLL, HLH, HHL, HHH, where L indicates the low pass filter, and H the high pass filter being applied to, respectively, the columns of length m, the rows of length n and then the frames of length fr. Note that for computational efficiency reasons each set of coefficients is stored in the order $n_{\mathrm{cfr}}\times n_{\mathrm{cm}}\times n_{\mathrm{cn}}$ (see output arguments nwcfr, nwct and nwcn in c09acc).

9: $\mathbf{icomm}\left[260\right]$ – Integer Communication Array

On entry: contains details of the discrete wavelet transform and the problem dimension as setup in the call to the initialization function c09acc.

On exit: contains additional information on the computed transform.

10: $\mathbf{fail}$ – NagError * Input/Output

The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).

6 Error Indicators and Warnings

NE_ALLOC_FAIL

Dynamic memory allocation failed.
See Section 3.1.2 in the Introduction to the NAG Library CL Interface for further information.

NE_BAD_PARAM

On entry, argument $⟨\mathit{\text{value}}⟩$ had an illegal value.

NE_INITIALIZATION

Either the communication array icomm has been corrupted or there has not been a prior call to the initialization function c09acc.

The initialization function was called with $\mathbf{wtrans}=\mathrm{Nag\_MultiLevel}$.

NE_INT

On entry, $\mathbf{fr}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{fr}=⟨\mathit{\text{value}}⟩$, the value of fr on initialization (see c09acc).

On entry, $\mathbf{m}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{m}=⟨\mathit{\text{value}}⟩$, the value of m on initialization (see c09acc).

On entry, $\mathbf{n}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{n}=⟨\mathit{\text{value}}⟩$, the value of n on initialization (see c09acc).

NE_INT_2

On entry, $\mathbf{lda}=⟨\mathit{\text{value}}⟩$ and $\mathbf{m}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{lda}\ge \mathbf{m}$.

On entry, $\mathbf{lenc}=⟨\mathit{\text{value}}⟩$ and $n_{\mathrm{ct}}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{lenc}\ge n_{\mathrm{ct}}$, where $n_{\mathrm{ct}}$ is the number of DWT coefficients returned by c09acc in argument nwct.

On entry, $\mathbf{sda}=⟨\mathit{\text{value}}⟩$ and $\mathbf{n}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{sda}\ge \mathbf{n}$.

NE_INTERNAL_ERROR

An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
See Section 7.5 in the Introduction to the NAG Library CL Interface for further information.

NE_NO_LICENCE

Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library CL Interface for further information.

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results