Integer, Intent (In)	::	ldc0, ns, nl, nk, iwa
Integer, Intent (Inout)	::	ifail
Integer, Intent (Out)	::	nvp
Real (Kind=nag_wp), Intent (In)	::	c0(ldc0,ns), c(ldc0,ldc0,nl)
Real (Kind=nag_wp), Intent (Inout)	::	d(ldc0,ldc0,nk), db(ldc0,ns), w(ldc0,ldc0,nk), wb(ldc0,ldc0,nk)
Real (Kind=nag_wp), Intent (Out)	::	p(nk), v0, v(nk), wa(iwa)

C Header Interface

#include <nag.h>

void	g13dbf_ (const double c0[], const double c[], const Integer ldc0, const Integer ns, const Integer nl, const Integer nk, double p[], double v0, double v[], double d[], double db[], double w[], double wb[], Integer nvp, double wa[], const Integer iwa, Integer ifail)

The routine may be called by the names g13dbf or nagf_tsa_multi_autocorr_part.

3 Description

The input is a set of lagged autocovariance matrices

C_{0}, C_{1}, C_{2}, \dots, C_{m}

. These will generally be sample values such as are obtained from a multivariate time series using g13dmf.

The main calculation is the recursive determination of the coefficients in the finite lag (forward) prediction equation

x_{t} = Φ_{l, 1} x_{t - 1} + \dots + Φ_{l, l} x_{t - l} + e_{l, t}

and the associated backward prediction equation

x_{t - l - 1} = Ψ_{l, 1} x_{t - l} + \dots + Ψ_{l, l} x_{t - 1} + f_{l, t}

together with the covariance matrices

D_{l}

e_{l, t}

and

G_{l}

f_{l, t}

The recursive cycle, by which the order of the prediction equation is extended from

l

l + 1

, is to calculate

M_{l + 1} = C_{l + 1}^{T} - Φ_{l, 1} C_{l}^{T} - \dots - Φ_{l, l} C_{1}^{T}

(1)

then

Φ_{l + 1, l + 1} = M_{l + 1} D_{l}^{- 1}

Ψ_{l + 1, l + 1} = {M^{T}}_{l + 1} G_{l}^{- 1}

from which

Φ_{l + 1, j} = Φ_{l, j} - Φ_{l + 1, l + 1} Ψ_{l, l + 1 - j}, j = 1, 2, \dots, l

(2)

and

Ψ_{l + 1, j} = Ψ_{l, j} - Ψ_{l + 1, l + 1} Φ_{l, l + 1 - j}, j = 1, 2, \dots, l .

(3)

Finally,

D_{l + 1} = D_{l} - M_{l + 1} {Φ^{T}}_{l + 1, l + 1}

and

G_{l + 1} = G_{l} - {M^{T}}_{l + 1} {Ψ^{T}}_{l + 1, l + 1}

(Here

T

denotes the transpose of a matrix.)

The cycle is initialized by taking (for

l = 0

)

D_{0} = G_{0} = C_{0} .

In the step from

l = 0

1

, the above equations contain redundant terms and simplify. Thus (1) becomes

M_{1} = {C^{T}}_{1}

and neither (2) or (3) are needed.

Quantities useful in assessing the effectiveness of the prediction equation are generalized variance ratios

v_{l} = \det D_{l} / \det C_{0}, l = 1, 2, \dots

and multiple squared partial autocorrelations

p_{l}^{2} = 1 - v_{l} / v_{l - 1} .

4 References

Akaike H (1971) Autoregressive model fitting for control Ann. Inst. Statist. Math. 23 163–180

Whittle P (1963) On the fitting of multivariate autoregressions and the approximate canonical factorization of a spectral density matrix Biometrika 50 129–134

5 Arguments

1: $c0 (ldc0, ns)$ – Real (Kind=nag_wp) array Input: On entry: contains the zero lag cross-covariances between the ns series as returned by g13dmf. (c0 is assumed to be symmetric, upper triangle only is used.)
2: $c (ldc0, ldc0, nl)$ – Real (Kind=nag_wp) array Input: On entry: contains the cross-covariances at lags $1$ to nl. $c (i, j, k)$ must contain the cross-covariance, $c_{i j k}$ , of series $i$ and series $j$ at lag $k$ . Series $j$ leads series $i$ .
3: $ldc0$ – Integer Input: On entry: the first dimension of the arrays c0, c, d, db, w and wb and the second dimension of the arrays c, d, w and wb as declared in the (sub)program from which g13dbf is called.

Constraint: $ldc0 \geq \max (ns, 1)$ .
4: $ns$ – Integer Input: On entry: $k$ , the number of time series whose cross-covariances are supplied in c and c0.

Constraint: $ns \geq 1$ .
5: $nl$ – Integer Input: On entry: $m$ , the maximum lag for which cross-covariances are supplied in c.

Constraint: $nl \geq 1$ .
6: $nk$ – Integer Input: On entry: the number of lags to which partial auto-correlations are to be calculated.

Constraint: $1 \leq nk \leq nl$ .
7: $p (nk)$ – Real (Kind=nag_wp) array Output: On exit: the multiple squared partial autocorrelations from lags $1$ to nvp; that is, $p (l)$ contains $p_{l}^{2}$ , for $l = 1, 2, \dots, nvp$ . For lags $nvp + 1$ to nk the elements of p are set to zero.
8: $v0$ – Real (Kind=nag_wp) Output: On exit: the lag zero prediction error variance (equal to the determinant of c0).
9: $v (nk)$ – Real (Kind=nag_wp) array Output: On exit: the prediction error variance ratios from lags $1$ to nvp; that is, $v (l)$ contains $v_{l}$ , for $l = 1, 2, \dots, nvp$ . For lags $nvp + 1$ to nk the elements of v are set to zero.
10: $d (ldc0, ldc0, nk)$ – Real (Kind=nag_wp) array Output: On exit: the prediction error variance matrices at lags $1$ to nvp.
Element $(i, j, k)$ of d contains the prediction error covariance of series $i$ and series $j$ at lag $k$ , for $k = 1, 2, \dots, nvp$ . Series $j$ leads series $i$ ; that is, the $(i, j)$ th element of $D_{k}$ . For lags $nvp + 1$ to nk the elements of d are set to zero.
11: $db (ldc0, ns)$ – Real (Kind=nag_wp) array Output: On exit: the backward prediction error variance matrix at lag nvp.
$db (i, j)$ contains the backward prediction error covariance of series $i$ and series $j$ ; that is, the $(i, j)$ th element of the $G_{k}$ , where $k = nvp$ .
12: $w (ldc0, ldc0, nk)$ – Real (Kind=nag_wp) array Output: On exit: the prediction coefficient matrices at lags $1$ to nvp.
$w (i, j, l)$ contains the $j$ th prediction coefficient of series $i$ at lag $l$ ; that is, the $(i, j)$ th element of $Φ_{k l}$ , where $k = nvp$ , for $l = 1, 2, \dots, nvp$ . For lags $nvp + 1$ to nk the elements of w are set to zero.
13: $wb (ldc0, ldc0, nk)$ – Real (Kind=nag_wp) array Output: On exit: the backward prediction coefficient matrices at lags $1$ to nvp.
$wb (i, j, l)$ contains the $j$ th backward prediction coefficient of series $i$ at lag $l$ ; that is, the $(i, j)$ th element of $Ψ_{k l}$ , where $k = nvp$ , for $l = 1, 2, \dots, nvp$ . For lags $nvp + 1$ to nk the elements of wb are set to zero.
14: $nvp$ – Integer Output: On exit: the maximum lag, $L$ , for which calculation of p, v, d, db, w and wb was successful. If the routine completes successfully nvp will equal nk.
15: $wa (iwa)$ – Real (Kind=nag_wp) array Workspace
16: $iwa$ – Integer Input: On entry: the dimension of the array wa as declared in the (sub)program from which g13dbf is called.

Constraint: $iwa \geq (2 \times ns + 1) \times ns$ .
17: $ifail$ – Integer Input/Output: On entry: ifail must be set to $0$ , $−1$ or $1$ to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $−1$ means that an error message is printed while a value of $1$ means that it is not.

If halting is not appropriate, the value $−1$ or $1$ is recommended. If message printing is undesirable, then the value $1$ is recommended. Otherwise, the value $0$ is recommended. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit: $ifail = 0$ unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

−1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 1$: On entry, $iwa = ⟨ value ⟩$ .
Constraint: $iwa \geq 1$ .

On entry, $iwa = ⟨ value ⟩$ and the minimum size $required = ⟨ value ⟩$ .
Constraint: $iwa \geq (2 \times ns + 1) \times ns$ .

On entry, $ldc0 = ⟨ value ⟩$ .
Constraint: $ldc0 \geq 1$ .

On entry, $nk = ⟨ value ⟩$ .
Constraint: $nk \geq 1$ .

On entry, $nk = ⟨ value ⟩$ and $nl = ⟨ value ⟩$ .
Constraint: $nk \leq nl$ .

On entry, $nl = ⟨ value ⟩$ .
Constraint: $nl \geq 1$ .

On entry, $ns = ⟨ value ⟩$ .
Constraint: $ns \geq 1$ .

On entry, $ns = ⟨ value ⟩$ and $ldc0 = ⟨ value ⟩$ .
Constraint: $ns \leq ldc0$ .

$ifail = 2$: c0 is not positive definite. The arguments v0, v, p, d, db, w, wb and nvp are set to zero.

$ifail = 3$: For $nvp = ⟨ value ⟩$ , at lag $k = nvp + 1$ , $D_{k}$ was found not to be positive definite.
Up to lag $k - 1$ , arguments v0, v, p, d, w and wb contain the values calculated so far. From lag $k$ they contain zero. The argument db contains the backward prediction coefficients for lag $k - 1$ .

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The conditioning of the problem depends on the prediction error variance ratios. Very small values of these may indicate loss of accuracy in the computations.

8 Parallelism and Performance

g13dbf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.

g13dbf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The time taken by g13dbf is roughly proportional to

{nk}^{2} \times {ns}^{3}

If sample autocorrelation matrices are used as input, then the output will be relevant to the original series scaled by their standard deviations. If these autocorrelation matrices are produced by g13dmf, you must replace the diagonal elements of

C_{0}

(otherwise used to hold the series variances) by

1

10 Example

This example reads the autocovariance matrices for four series from lag

0

5

. It calls g13dbf to calculate the multivariate partial autocorrelation function and other related matrices of statistics up to lag

3

. It prints the results.

g13db: FL CL CPP AD

NAG FL Interfaceg13dbf (multi_​autocorr_​part)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG FL Interface
g13dbf (multi_autocorr_part)