NAG CL Interface
g13eac (multi_​kalman_​sqrt_​var)

Settings help

CL Name Style:


1 Purpose

g13eac performs a combined measurement and time update of one iteration of the time-varying Kalman filter. The method employed for this update is the square root covariance filter with the system matrices in their original form.

2 Specification

#include <nag.h>
void  g13eac (Integer n, Integer m, Integer p, double s[], Integer tds, const double a[], Integer tda, const double b[], Integer tdb, const double q[], Integer tdq, const double c[], Integer tdc, const double r[], Integer tdr, double k[], Integer tdk, double h[], Integer tdh, double tol, NagError *fail)
The function may be called by the names: g13eac, nag_tsa_multi_kalman_sqrt_var or nag_kalman_sqrt_filt_cov_var.

3 Description

For the state space system defined by
X i+1 = A i X i + B i W i var( W i ) = Q i Y i = C i X i + V i var( V i ) = R i  
the estimate of X i given observations Y 1 to Y i-1 is denoted by X ^ ii - 1 with var( X ^ ii - 1 ) = P ii - 1 = S i SiT . g13eac performs one recursion of the square root covariance filter algorithm, summarised as follows:
( R i 1/2 C i S i 0 0 A i S i B i Q i 1/2 ) U = ( H i 1/2 0 0 G i S i+1 0 ) (Pre-array) (Post-array)  
where U is an orthogonal transformation triangularizing the pre-array. The triangularisation is carried out via Householder transformations exploiting the zero pattern in the pre-array. The measurement-update for the estimated state vector X is
X ^ ii = X ^ ii - 1 - K i [ C i X ^ ii - 1 - Y i ] (1)
where K i is the Kalman gain matrix, whilst the time-update for X is
X ^ i + 1i = A i X ^ ii + D i U i (2)
where D i U i represents any deterministic control used. The relationship between the Kalman gain matrix K i and G i is given by
A i K i = G i ( H i 1/2 ) −1  
The function returns the product of the matrices A i and K i represented as AK i , and the state covariance matrix P ii - 1 factorized as P ii - 1 = S i SiT (see the G13 Chapter Introduction for more information concerning the covariance filter).

4 References

Anderson B D O and Moore J B (1979) Optimal Filtering Prentice–Hall
Harvey A C and Phillips G D A (1979) Maximum likelihood estimation of regression models with autoregressive — moving average disturbances Biometrika 66 49–58
Vanbegin M, van Dooren P and Verhaegen M H G (1989) Algorithm 675: FORTRAN subroutines for computing the square root covariance filter and square root information filter in dense or Hessenberg forms ACM Trans. Math. Software 15 243–256
Verhaegen M H G and van Dooren P (1986) Numerical aspects of different Kalman filter implementations IEEE Trans. Auto. Contr. AC-31 907–917
Wei W W S (1990) Time Series Analysis: Univariate and Multivariate Methods Addison–Wesley

5 Arguments

1: n Integer Input
On entry: the actual state dimension, n , i.e., the order of the matrices S i and A i .
Constraint: n1 .
2: m Integer Input
On entry: the actual input dimension, m , i.e., the order of the matrix Q i 1/2 .
Constraint: m1 .
3: p Integer Input
On entry: the actual output dimension, p , i.e., the order of the matrix R i 1/2 .
Constraint: p1 .
4: s[n×tds] double Input/Output
Note: the (i,j)th element of the matrix S is stored in s[(i-1)×tds+j-1].
On entry: the leading n × n lower triangular part of this array must contain S i , the left Cholesky factor of the state covariance matrix P ii - 1 .
On exit: the leading n × n lower triangular part of this array contains S i+1 , the left Cholesky factor of the state covariance matrix P i + 1i .
5: tds Integer Input
On entry: the stride separating matrix column elements in the array s.
Constraint: tdsn .
6: a[n×tda] const double Input
Note: the (i,j)th element of the matrix A is stored in a[(i-1)×tda+j-1].
On entry: the leading n × n part of this array must contain A i , the state transition matrix of the discrete system.
7: tda Integer Input
On entry: the stride separating matrix column elements in the array a.
Constraint: tdan .
8: b[n×tdb] const double Input
Note: the (i,j)th element of the matrix B is stored in b[(i-1)×tdb+j-1].
On entry: if q is not NULL then the leading n × m part of this array must contain the matrix B i , otherwise if q is NULL then the leading n × m part of the array must contain the matrix B i Q i 1/2 . B i is the input weight matrix and Q i is the noise covariance matrix.
9: tdb Integer Input
On entry: the stride separating matrix column elements in the array b.
Constraint: tdbm .
10: q[m×tdq] const double Input
Note: the (i,j)th element of the matrix Q is stored in q[(i-1)×tdq+j-1].
On entry: if the noise covariance matrix is to be supplied separately from the input weight matrix then the leading m × m lower triangular part of this array must contain Q i 1/2 , the left Cholesky factor of the input process noise covariance matrix. If the noise covariance matrix is to be input with the weight matrix as B i Q i 1/2 then the array q must be set to NULL.
11: tdq Integer Input
On entry: the stride separating matrix column elements in the array q.
Constraint: tdqm if q is defined.
12: c[p×tdc] const double Input
Note: the (i,j)th element of the matrix C is stored in c[(i-1)×tdc+j-1].
On entry: the leading p × n part of this array must contain C i , the output weight matrix of the discrete system.
13: tdc Integer Input
On entry: the stride separating matrix column elements in the array c.
Constraint: tdcn .
14: r[p×tdr] const double Input
Note: the (i,j)th element of the matrix R is stored in r[(i-1)×tdr+j-1].
On entry: the leading p × p lower triangular part of this array must contain R i 1/2 , the left Cholesky factor of the measurement noise covariance matrix.
15: tdr Integer Input
On entry: the stride separating matrix column elements in the array r.
Constraint: tdrp .
16: k[n×tdk] double Output
Note: the (i,j)th element of the matrix K is stored in k[(i-1)×tdk+j-1].
On exit: if k is not NULL then the leading n × p part of k contains AK i , the product of the Kalman filter gain matrix K i with the state transition matrix A i . If AKi is not required then k must be set to NULL.
17: tdk Integer Input
On entry: the stride separating matrix column elements in the array k.
Constraint: if k is not NULL, tdkp
18: h[p×tdh] double Output
Note: the (i,j)th element of the matrix H is stored in h[(i-1)×tdh+j-1].
On exit: if k is not NULL then the leading p × p lower triangular part of this array contains H i 1/2 . If k is NULL then h is not referenced and may be set to NULL.
19: tdh Integer Input
On entry: the stride separating matrix column elements in the array h.
Constraint: if both k and h are not NULL, tdhp
20: tol double Input
On entry: if both k and h are not NULL then tol is used to test for near singularity of the matrix H i 1/2 . If you set tol to be less than p 2 ε then the tolerance is taken as p 2 ε , where ε is the machine precision. Otherwise, tol need not be set by you.
21: fail NagError * Input/Output
The NAG error argument (see Section 7 in the Introduction to the NAG Library CL Interface).

6 Error Indicators and Warnings

NE_2_INT_ARG_LT
On entry tda=value while n=value . These arguments must satisfy tdan .
On entry tdb=value while m=value . These arguments must satisfy tdbm .
On entry tdc=value while n=value . These arguments must satisfy tdcn .
On entry tdh=value while p=value . These arguments must satisfy tdhp .
On entry tdk=value while p=value . These arguments must satisfy tdkp .
On entry tdq=value while m=value . These arguments must satisfy tdqm .
On entry tdr=value while p=value . These arguments must satisfy tdrp .
On entry, tds=value while n=value . These arguments must satisfy tdsn .
NE_ALLOC_FAIL
Dynamic memory allocation failed.
NE_INT_ARG_LT
On entry, m=value.
Constraint: m1.
On entry, n=value.
Constraint: n1.
On entry, p=value.
Constraint: p1.
NE_MAT_SINGULAR
The matrix sqrt(H) is singular.
NE_NULL_ARRAY
Array h has null address.

7 Accuracy

The use of the square root algorithm improves the stability of the computations.

8 Parallelism and Performance

g13eac makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

The algorithm requires 7 6 n 3 + n 2 ( 5 2 p+m) + n ( 1 2 m 2 + p 2 ) operations and is backward stable (see Vanbegin et al. (1989)).

10 Example

For this function two examples are presented. There is a single example program for g13eac, with a main program and the code to solve the two example problems is given in the functions ex1 and ex2.
Example 1 (ex1)
To apply three iterations of the Kalman filter (in square root covariance form) to the system ( A i , B i , C i ) . The same data is used for all three iterative steps.
Example 2 (ex2)
In the second example 2000 terms of an ARMA(1,1) time series (with σ 2 = 1.0 , θ = 0.9 and ϕ=0.4 ) are generated using the function g05phc. The Kalman filter and optimization function e04ucc are then used to find the maximum likelihood estimate for the time series arguments θ and ϕ . The ARMA(1,1) time series is defined by
y k = ϕ y k-1 + ε k - θ ε k-1  
This has the following state space representation (Harvey and Phillips (1979))
x k = ( ϕ 1 0 0 ) x k-1 + ( 1 -θ ) ε k y k = ( 1 0 ) x k  
where the state vector x k = ( y k -θ ε k ) and ε k is uncorrelated white noise with zero mean and variance σ 2 , i.e.,
E [ ε k ] = 0 , E [ ε k ε k ] = σ 2 , E [ y k ε k ] = σ 2 ​ and ​ E [ ε k ε k-1 ] = 0 .  
Since σ 2 = 1 we arrive at the following Kalman Filter matrices
A k = ( ϕ 1 0 0 ) , B k = ( 1 -θ ) C k = ( 1 0 ) , Q k = 0 ​ and ​ R k = 1 .  
The initial estimates for the state vector, x 10 , and state covariance matrix, P 10 , are:
x 10 = E [ x k ] = 0 ​ and ​ P 10 = E [ x k xkT] = ( E [ y k y k ] -θ E [ y k ε k ] -θ E [ y k ε k ] θ 2 E [ ε k ε k ] ) .  
Since E [ y k y k ] = γ = (1+ θ 2 -2ϕθ) σ 2 (1- ϕ 2 ) (Wei (1990))
P 10 = ( γ -θ -θ θ 2 ) .  
Using P 10 = S 10 S10T gives an initial Cholesky ‘square root’ of
S 10 = ( γ 0 -θ γ θ γ - 1 γ ) .  

10.1 Program Text

Program Text (g13eace.c)

10.2 Program Data

Program Data (g13eace.d)

10.3 Program Results

Program Results (g13eace.r)