g02abf computes the nearest correlation matrix, in the Frobenius norm or weighted Frobenius norm, and optionally with bounds on the eigenvalues, to a given square, input matrix.

2 Specification

Fortran Interface

Subroutine g02abf (

g, ldg, n, opt, alpha, w, errtol, maxits, maxit, x, ldx, iter, feval, nrmgrd, ifail)

Integer, Intent (In)	::	ldg, n, maxits, maxit, ldx
Integer, Intent (Inout)	::	ifail
Integer, Intent (Out)	::	iter, feval
Real (Kind=nag_wp), Intent (In)	::	alpha, errtol
Real (Kind=nag_wp), Intent (Inout)	::	g(ldg,n), w(*), x(ldx,n)
Real (Kind=nag_wp), Intent (Out)	::	nrmgrd
Character (1), Intent (In)	::	opt

C Header Interface

#include <nag.h>

void	g02abf_ (double g[], const Integer ldg, const Integer n, const char opt, const double alpha, double w[], const double errtol, const Integer maxits, const Integer maxit, double x[], const Integer ldx, Integer iter, Integer feval, double nrmgrd, Integer ifail, const Charlen length_opt)

The routine may be called by the names g02abf or nagf_correg_corrmat_nearest_bounded.

3 Description

Finds the nearest correlation matrix

X

by minimizing

\frac{1}{2} {‖ G - X ‖}^{2}

where

G

is an approximate correlation matrix.

The norm can either be the Frobenius norm or the weighted Frobenius norm

\frac{1}{2} {‖ W^{\frac{1}{2}} (G - X) W^{\frac{1}{2}} ‖}_{F}^{2}

You can optionally specify a lower bound on the eigenvalues,

α

, of the computed correlation matrix, forcing the matrix to be positive definite,

0 < α < 1

Note that if the weights vary by several orders of magnitude from one another the algorithm may fail to converge.

4 References

Borsdorf R and Higham N J (2010) A preconditioned (Newton) algorithm for the nearest correlation matrix IMA Journal of Numerical Analysis 30(1) 94–107

Qi H and Sun D (2006) A quadratically convergent Newton method for computing the nearest correlation matrix SIAM J. Matrix AnalAppl 29(2) 360–385

5 Arguments

1: $g (ldg, n)$ – Real (Kind=nag_wp) array Input/Output

On entry:

G

, the initial matrix.

On exit:

G

is overwritten.

2: $ldg$ – Integer Input

On entry: the first dimension of the array g as declared in the (sub)program from which g02abf is called.

Constraint:

ldg \geq n

3: $n$ – Integer Input

On entry: the order of the matrix

G

Constraint:

n > 0

4: $opt$ – Character(1) Input

On entry: indicates the problem to be solved.

$opt ='A'$: The lower bound problem is solved.
$opt ='W'$: The weighted norm problem is solved.
$opt ='B'$: Both problems are solved.

Constraint:

opt ='A'

'W'

'B'

5: $alpha$ – Real (Kind=nag_wp) Input

On entry: the value of

α

opt ='W'

, alpha need not be set.

Constraint:

0.0 < alpha < 1.0

6: $w (*)$ – Real (Kind=nag_wp) array Input/Output

Note: the dimension of the array w must be at least

n

opt \neq'A'

, and at least

0

otherwise.

On entry: the square roots of the diagonal elements of

W

, that is the diagonal of

W^{\frac{1}{2}}

opt ='A'

, w is not referenced and need not be set.

On exit: if

opt ='W'

'B'

, the array is scaled so

0 < w (i) \leq 1

, for

i = 1, 2, \dots, n

Constraint:

w (i) > 0.0

, for

i = 1, 2, \dots, n

7: $errtol$ – Real (Kind=nag_wp) Input

On entry: the termination tolerance for the Newton iteration. If

errtol \leq 0.0

n \times \sqrt{machine precision}

is used.

8: $maxits$ – Integer Input

On entry: specifies the maximum number of iterations to be used by the iterative scheme to solve the linear algebraic equations at each Newton step.

maxits \leq 0

2 \times n

is used.

9: $maxit$ – Integer Input

On entry: specifies the maximum number of Newton iterations.

maxit \leq 0

200

is used.

10: $x (ldx, n)$ – Real (Kind=nag_wp) array Output

On exit: contains the nearest correlation matrix.

11: $ldx$ – Integer Input

On entry: the first dimension of the array x as declared in the (sub)program from which g02abf is called.

Constraint:

ldx \geq n

12: $iter$ – Integer Output

On exit: the number of Newton steps taken.

13: $feval$ – Integer Output

On exit: the number of function evaluations of the dual problem.

14: $nrmgrd$ – Real (Kind=nag_wp) Output

On exit: the norm of the gradient of the last Newton step.

15: $ifail$ – Integer Input/Output

On entry: ifail must be set to

0

- 1

1

to set behaviour on detection of an error; these values have no effect when no error is detected.

A value of

0

causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of

- 1

means that an error message is printed while a value of

1

means that it is not.

If halting is not appropriate, the value

- 1

1

is recommended. If message printing is undesirable, then the value

1

is recommended. Otherwise, the value

0

is recommended. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit:

ifail = 0

unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

- 1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 1$: On entry, all elements of w were not positive.
Constraint: $w (i) > 0.0$ , for all $i$ .

On entry, $alpha = ⟨ value ⟩$ .
Constraint: $0.0 < alpha < 1.0$ .

On entry, $ldg = ⟨ value ⟩$ and $n = ⟨ value ⟩$ .
Constraint: $ldg \geq n$ .

On entry, $ldx = ⟨ value ⟩$ and $n = ⟨ value ⟩$ .
Constraint: $ldx \geq n$ .

On entry, $n = ⟨ value ⟩$ .
Constraint: $n > 0$ .

On entry, the value of opt is invalid.
Constraint: $opt ='A'$ , $'W'$ or $'B'$ .

$ifail = 2$: Newton iteration fails to converge in $⟨ value ⟩$ iterations. Increase maxit or check the call to the routine.

$ifail = 3$: The machine precision is limiting convergence. In this instance the returned value of x may be useful.

$ifail = 4$: An intermediate eigenproblem could not be solved. This should not occur. Please contact NAG with details of your call.

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The returned accuracy is controlled by errtol and limited by machine precision.

8 Parallelism and Performance

g02abf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.

g02abf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

Arrays are internally allocated by g02abf. The total size of these arrays is

12 \times n + 3 \times n \times n + \max (2 \times n \times n + 6 \times n + 1, 120 + 9 \times n)

real elements and

5 \times n + 3

integer elements. All allocated memory is freed before return of g02abf.

10 Example

This example finds the nearest correlation matrix to:

G = (\begin{matrix} 2 & - 1 & 0 & 0 \\ - 1 & 2 & - 1 & 0 \\ 0 & - 1 & 2 & - 1 \\ 0 & 0 & - 1 & 2 \end{matrix})

weighted by

W^{\frac{1}{2}} = diag (100, 20, 20, 20)

with minimum eigenvalue

0.02

g02ab: FL CL CPP AD

NAG FL Interfaceg02abf (corrmat_​nearest_​bounded)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG FL Interface
g02abf (corrmat_nearest_bounded)