e02jd: FL CL CPP AD

NAG FL Interface
e02jdf (dim2_spline_ts_sctr)

Note: this routine uses optional parameters to define choices in the problem specification and in the details of the algorithm. If you wish to use default settings for all of the optional parameters, you need only read Sections 1 to 10 of this document. If, however, you wish to reset some or all of the settings please refer to Section 11 for a detailed description of the specification of the optional parameters produced by the routine.

Keyword Search:

NAG Library Manual, Mark 27.1

Interfaces: FL CL CPP AD

NAG FL Interface Introduction

E02 (Fit) Chapter Contents

E02 (Fit) Chapter Introduction

e02jd: FL CL CPP AD

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

▸▿ 10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

▸▿ 11 Optional Parameters

11.1 Description of the Optional Parameters

1 Purpose

e02jdf computes a spline approximation to a set of scattered data using a two-stage approximation method.

The computational complexity of the method grows linearly with the number of data points; hence large datasets are easily accommodated.

2 Specification

Fortran Interface

Subroutine e02jdf (

n, x, y, f, lsminp, lsmaxp, nxcels, nycels, lcoefs, coefs, iopts, opts, ifail)

Integer, Intent (In)	::	n, lsminp, lsmaxp, nxcels, nycels, lcoefs
Integer, Intent (Inout)	::	iopts(*), ifail
Real (Kind=nag_wp), Intent (In)	::	x(n), y(n), f(n)
Real (Kind=nag_wp), Intent (Inout)	::	opts(*)
Real (Kind=nag_wp), Intent (Out)	::	coefs(lcoefs)

C Header Interface

#include <nag.h>

void	e02jdf_ (const Integer n, const double x[], const double y[], const double f[], const Integer lsminp, const Integer lsmaxp, const Integer nxcels, const Integer nycels, const Integer lcoefs, double coefs[], Integer iopts[], double opts[], Integer *ifail)

The routine may be called by the names e02jdf or nagf_fit_dim2_spline_ts_sctr.

Before calling e02jdf, e02zkf must be called with optstr set to "Initialize = e02jdf". Settings for optional algorithmic arguments may be specified by calling e02zkf before a call to e02jdf.

3 Description

e02jdf determines a smooth bivariate spline approximation to a set of data points

(x_{i}, y_{i}, f_{i})

, for

i = 1, 2, \dots, n

. Here, ‘smooth’ means

C^{1}

C^{2}

. (You may select the degree of smoothing using the optional parameter Global Smoothing Level.)

The approximation domain is the bounding box

[x_{\min}, x_{\max}] \times [y_{\min}, y_{\max}]

, where

x_{\min}

(respectively

y_{\min}

) and

x_{\max}

(respectively

y_{\max}

) denote the lowest and highest data values of the

(x_{i})

(respectively

(y_{i})

The spline is computed by local approximations on a uniform triangulation of the bounding box. These approximations are extended to a smooth spline representation of the surface over the domain. The local approximation scheme is controlled by the optional parameter Local Method. The schemes provided are: by least squares polynomial approximation (Davydov and Zeilfelder (2004)); by hybrid polynomial and radial basis function (RBF) approximation (Davydov et al. (2006)); or by pure RBF approximation (Davydov et al. (2005)).

The two-stage approximation method employed by e02jdf is derived from the TSFIT package of O. Davydov and F. Zeilfelder.

Values of the computed spline can subsequently be computed by calling e02jef or e02jff.

4 References

Davydov O, Morandi R and Sestini A (2006) Local hybrid approximation for scattered data fitting with bivariate splines Comput. Aided Geom. Design 23 703–721

Davydov O, Sestini A and Morandi R (2005) Local RBF approximation for scattered data fitting with bivariate splines Trends and Applications in Constructive Approximation M. G. de Bruin, D. H. Mache, and J. Szabados, Eds ISNM Vol. 151 Birkhauser 91–102

Davydov O and Zeilfelder F (2004) Scattered data fitting by direct extension of local polynomials to bivariate splines Advances in Comp. Math. 21 223–271

5 Arguments

1: $n$ – Integer Input

On entry:

n

, the number of data values to be fitted.

Constraint:

n > 1

2: $x (n)$ – Real (Kind=nag_wp) array Input

3: $y (n)$ – Real (Kind=nag_wp) array Input

4: $f (n)$ – Real (Kind=nag_wp) array Input

On entry: the

(x_{i}, y_{i}, f_{i})

data values to be fitted.

Constraint:

x (j) \neq x (1)

for some

j = 2, \dots, n

and

y (k) \neq y (1)

for some

k = 2, \dots, n

; i.e., there are at least two distinct

x

and

y

values.

5: $lsminp$ – Integer Input

6: $lsmaxp$ – Integer Input

On entry: lsminp and lsmaxp are control parameters for the local approximations.

Each local approximation is computed on a local domain containing one of the triangles in the discretization of the bounding box. The size of each local domain will be adaptively chosen such that if it contains fewer than lsminp sample points it is expanded, else if it contains greater than lsmaxp sample points a thinning method is applied. lsmaxp mainly controls computational cost (in that working with a thinned set of points is cheaper and may be appropriate if the input data is densely distributed), while lsminp allows handling of different types of scattered data.

Setting

lsmaxp < lsminp

, and, therefore, forcing either expansion or thinning, may be useful for computing initial coarse approximations. In general smaller values for these arguments reduces cost.

A calibration procedure (experimenting with a small subset of the data to be fitted and validating the results) may be needed to choose the most appropriate values for lsminp and lsmaxp.

Constraints:

$1 \leq lsminp \leq n$ ;
$lsmaxp \geq 1$ .

7: $nxcels$ – Integer Input

8: $nycels$ – Integer Input

On entry: nxcels (respectively nycels) is the number of cells in the

x

(respectively

y

) direction that will be used to create the triangulation of the bounding box of the domain of the function to be fitted.

Greater efficiency generally comes when nxcels and nycels are chosen to be of the same order of magnitude and are such that n is

O (nxcels \times nycels)

. Thus for a ‘square’ triangulation — when

nxcels = nycels

— the quantities

\sqrt{n}

and nxcels should be of the same order of magnitude. See also Section 9.

Constraints:

$nxcels \geq 1$ ;
$nycels \geq 1$ .

9: $lcoefs$ – Integer Input

On entry: the length of the array coefs of the computed spline coefficients.

Constraints:

if $Global Smoothing Level = 1$ , $lcoefs \geq (((nxcels + 2) \times (nycels + 2) + 1) / 2) \times 10 + 1$ ;
if $Global Smoothing Level = 2$ , $lcoefs \geq 28 \times (nxcels + 2) \times (nycels + 2) \times 4 + 1$ .

10: $coefs (lcoefs)$ – Real (Kind=nag_wp) array Communication Array

On exit: if

ifail = 0

on exit, coefs contains the computed spline coefficients.

11: $iopts (*)$ – Integer array Communication Array

Note: the dimension of this array is dictated by the requirements of associated functions that must have been previously called. This array must be the same array passed as argument iopts in the previous call to e02zkf.

On entry: the contents of iopts must not be modified in any way either directly or indirectly, by further calls to e02zkf, before calling either or both of the evaluation routines e02jef and e02jff.

12: $opts (*)$ – Real (Kind=nag_wp) array Communication Array

On entry: the contents of opts must not be modified in any way either directly or indirectly, by further calls to e02zkf, before calling either or both of the evaluation routines e02jef and e02jff.

13: $ifail$ – Integer Input/Output

On entry: ifail must be set to

0

- 1

1

to set behaviour on detection of an error; these values have no effect when no error is detected.

A value of

0

causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of

- 1

means that an error message is printed while a value of

1

means that it is not.

If halting is not appropriate, the value

- 1

1

is recommended. If message printing is undesirable, then the value

1

is recommended. Otherwise, the value

0

is recommended. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit:

ifail = 0

unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

- 1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 2$: On entry, $n = ⟨ value ⟩$ .
Constraint: $n > 1$ .

$ifail = 4$: On entry, $lsminp = ⟨ value ⟩$ and $n = ⟨ value ⟩$ .
Constraint: $1 \leq lsminp \leq n$ .

$ifail = 5$: On entry, $lsmaxp = ⟨ value ⟩$ .
Constraint: $lsmaxp \geq 1$ .

$ifail = 6$: On entry, $nxcels = ⟨ value ⟩$ .
Constraint: $nxcels \geq 1$ .

$ifail = 7$: On entry, $nycels = ⟨ value ⟩$ .
Constraint: $nycels \geq 1$ .

$ifail = 8$: On entry, $lcoefs = ⟨ value ⟩$ .
Constraint: if $Global Smoothing Level = 1$ ,
$lcoefs \geq (((nxcels + 2) \times (nycels + 2) + 1) / 2) \times 10 + 1$ ;
if $Global Smoothing Level = 2$ ,
$lcoefs \geq 28 \times (nxcels + 2) \times (nycels + 2) \times 4 + 1$ .

$ifail = 9$: Option arrays are not initialized or are corrupted.

$ifail = 11$: An unexpected algorithmic failure was encountered. Please contact NAG.

$ifail = 12$: On entry, all elements of x or of y are equal.

$ifail = 20$: The selected radial basis function cannot be used with the RBF local method.

$ifail = 21$: The value of optional parameter Polynomial Starting Degree was invalid.

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

Technical results on error bounds can be found in Davydov and Zeilfelder (2004), Davydov et al. (2006) and Davydov et al. (2005).

Local approximation by polynomials of degree

d

for

n

data points has optimal approximation order

n^{- (d + 1) / 2}

. The improved approximation power of hybrid polynomial/RBF and of pure RBF approximations is shown in Davydov et al. (2006) and Davydov et al. (2005).

The approximation error for

C^{1}

global smoothing is

O (n^{- 2})

. For

C^{2}

smoothing the error is

O (n^{- 7 / 2})

when

Supersmooth C2 = YES

and

O (n^{- 3})

when

Supersmooth C2 = NO

Whether maximal accuracy is achieved depends on the distribution of the input data and the choices of the algorithmic parameters. The references above contain extensive numerical tests and further technical discussions of how best to configure the method.

8 Parallelism and Performance

e02jdf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.

e02jdf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

n

-linear complexity and memory usage can be attained for sufficiently dense input data if the triangulation parameters nxcels and nycels are chosen as recommended in their descriptions above. For sparse input data on such triangulations, if many expansion steps are required (see lsminp) the complexity may rise to be loglinear.

Parts of the pure RBF method used when

Local Method = RBF

have

n

-quadratic memory usage.

Note that if

Local Method = HYBRID

and an initial hybrid approximation is deemed unreliable (see the description of optional parameter Minimum Singular Value LHA), a pure polynomial approximation will be used instead on that local domain.

10 Example

The Franke function

\begin{matrix} f (x, y) & = & 0.75 \exp (- ({(9 x - 2)}^{2} + {(9 y - 2)}^{2}) / 4) + \\ 0.75 \exp (- {(9 x + 1)}^{2} / 49 - (9 y + 1) / 10) + \\ 0.5 \exp (- ({(9 x - 7)}^{2} + {(9 y - 3)}^{2}) / 4) - \\ 0.2 \exp (- {(9 x - 4)}^{2} - {(9 y - 7)}^{2}) \end{matrix}

is widely used for testing surface-fitting methods. The example program randomly generates a number of points on this surface. From these a spline is computed and then evaluated at a vector of points and on a mesh.

11 Optional Parameters

Several optional parameters in e02jdf control aspects of the algorithm, methodology used, logic or output. Their values are contained in the arrays iopts and opts; these must be initialized before calling e02jdf by first calling e02zkf with optstr set to "Initialize = e02jdf".

Each optional parameter has an associated default value; to set any of them to a non-default value, or to reset any of them to the default value, use e02zkf. The current value of an optional parameter can be queried using e02zlf.

The remainder of this section can be skipped if you wish to use the default values for all optional parameters.

The following is a list of the optional parameters available. A full description of each optional parameter is provided in Section 11.1.

Averaged Spline
Global Smoothing Level
Interpolation Only RBF
Local Method
Minimum Singular Value LHA
Minimum Singular Value LPA
Polynomial Starting Degree
Radial Basis Function
Scaling Coefficient RBF
Separation LRBFA
Supersmooth C2

11.1 Description of the Optional Parameters

For each option, we give a summary line, a description of the optional parameter and details of constraints.

The summary line contains:

the keywords;
a parameter value, where the letters $a$ , $i$ and $r$ denote options that take character, integer and real values respectively;
the default value.

Keywords and character values are case insensitive.

For e02jdf the maximum length of the parameter cvalue used by e02zlf is

16

Averaged Spline

a

Default

= NO

When the bounding box is triangulated there are

8

equivalent configurations of the mesh. Setting

Averaged Spline = YES

will use the averaged value of the

8

possible local polynomial approximations over each triangle in the mesh. This usually gives better results but at (about 8 times) higher computational cost.

Constraint:

Averaged Spline = YES

NO

Global Smoothing Level

i

Default

= 1

The smoothness level for the global spline approximation.

$Global Smoothing Level = 1$: Will use $C^{1}$ piecewise cubics.
$Global Smoothing Level = 2$: Will use $C^{2}$ piecewise sextics.

Constraint:

Global Smoothing Level = 1

2

Interpolation Only RBF

a

Default

= YES

Interpolation Only RBF = YES

, each local RBF approximation is computed by interpolation.

Interpolation Only RBF = NO

, each local RBF approximation is computed by a discrete least squares approach. This is likely to be more accurate and more expensive than interpolation.

Local Method = HYBRID

POLYNOMIAL

, this option setting is ignored.

Constraint:

Interpolation Only RBF = YES

NO

Local Method

a

Default

= POLYNOMIAL

The local approximation scheme to use.

$Local Method = POLYNOMIAL$: Uses least squares polynomial approximations.
$Local Method = HYBRID$: Uses hybrid polynomial and RBF approximations.
$Local Method = RBF$: Uses pure RBF approximations.

In general

POLYNOMIAL

is less computationally expensive than

HYBRID

is less computationally expensive than

RBF

with the reverse ordering holding for accuracy of results.

Constraint:

Local Method = POLYNOMIAL

HYBRID

RBF

Minimum Singular Value LHA

r

Default

= 1.0

A tolerance measure for accepting or rejecting a local hybrid approximation (LHA) as reliable.

The solution of a local least squares problem solved on each triangle subdomain is accepted as reliable if the minimum singular value

σ

of the collocation matrix (of polynomial and radial basis function terms) associated with the least squares problem satisfies

Minimum Singular Value LHA \leq σ

In general the approximation power will be reduced as Minimum Singular Value LHA is reduced. (A small

σ

indicates that the local data has hidden redundancies which prevent it from carrying enough information for a good approximation to be made.) Setting Minimum Singular Value LHA very large may have the detrimental effect that only approximations of low degree are deemed reliable.

A calibration procedure (experimenting with a small subset of the data to be fitted and validating the results) may be needed to choose the most appropriate value for this parameter.

Local Method = POLYNOMIAL

RBF

, this option setting is ignored.

Constraint:

Minimum Singular Value LHA \geq 0.0

Minimum Singular Value LPA

r

Default

= 1.0

A tolerance measure for accepting or rejecting a local polynomial approximation (LPA) as reliable. Clearly this setting is relevant when

Local Method = POLYNOMIAL

, but it also may be used when

Local Method = HYBRID

(see Section 9.)

The solution of a local least squares problem solved on each triangle subdomain is accepted as reliable if the minimum singular value

σ

of the matrix (of Bernstein polynomial values) associated with the least squares problem satisfies

Minimum Singular Value LPA \leq σ

In general the approximation power will be reduced as Minimum Singular Value LPA is reduced. (A small

σ

indicates that the local data has hidden redundancies which prevent it from carrying enough information for a good approximation to be made.) Setting Minimum Singular Value LPA very large may have the detrimental effect that only approximations of low degree are deemed reliable.

Minimum Singular Value LPA will have no effect if

Polynomial Starting Degree = 0

, and it will have little effect if the input data is ‘smooth’ (e.g., from a known function).

A calibration procedure (experimenting with a small subset of the data to be fitted and validating the results) may be needed to choose the most appropriate value for this parameter.

Local Method = RBF

, this option setting is ignored.

Constraint:

Minimum Singular Value LPA \geq 0.0

Polynomial Starting Degree

i

Default

= 5

Local Method = HYBRID

,
Default

= 1

otherwise

The degree to be used for the polynomial part in the initial step of each local approximation.

At this initial step the method will attempt to fit with a local approximation having polynomial part of degree Polynomial Starting Degree. If

Local Method = POLYNOMIAL

and the approximation is deemed unreliable (according to Minimum Singular Value LPA), the degree will be decremented by one and a new local approximation computed, ending with a constant approximation if no other is reliable. If

Local Method = HYBRID

and the approximation is deemed unreliable (according to Minimum Singular Value LHA), a pure polynomial approximation of this degree will be tried instead. The method then proceeds as in the

POLYNOMIAL

case.

Polynomial Starting Degree is bounded from above by the maximum possible spline degree, which is

6

(when performing

C^{2}

global super-smoothing). Note that the best-case approximation error (see Section 7) for

C^{2}

smoothing with

Supersmooth C2 = NO

is achieved for local polynomials of degree

5

; that is, for this level of global smoothing no further benefit is gained by setting

Polynomial Starting Degree = 6

The default value gives a good compromise between efficiency and accuracy. In general the best approximation can be obtained by setting:

If $Local Method = POLYNOMIAL$
- if $Global Smoothing Level = 1$ , $Polynomial Starting Degree = 3$ ;
- if $Global Smoothing Level = 2$ ;
  - if $Supersmooth C2 = NO$ , $Polynomial Starting Degree = 5$ ;
  - otherwise $Polynomial Starting Degree = 6$ .
If $Local Method = HYBRID$ , Polynomial Starting Degree as small as possible.

Local Method = RBF

, this option setting is ignored.

Constraints:

if $Local Method = HYBRID$ ,
- if $Radial Basis Function = MQ2$ , $MQ3$ , $TPS$ or $POLYHARMONIC3$ , $Polynomial Starting Degree \geq 1$ ;
- if $Radial Basis Function = TPS4$ or $POLYHARMONIC5$ , $Polynomial Starting Degree \geq 2$ ;
- if $Radial Basis Function = TPS6$ or $POLYHARMONIC7$ , $Polynomial Starting Degree \geq 3$ ;
- if $Radial Basis Function = POLYHARMONIC9$ , $Polynomial Starting Degree \geq 4$ ;
otherwise $Polynomial Starting Degree \geq 0$ ;
if $Local Method = POLYNOMIAL$ and $Global Smoothing Level = 1$ , $Polynomial Starting Degree \leq 3$ ;
otherwise $Polynomial Starting Degree \leq 6$ .

Radial Basis Function

a

Default

= MQ

Scaling Coefficient RBF

r

Default

= 1.0

Radial Basis Function selects the RBF to use in each local RBF approximation, while Scaling Coefficient RBF selects the scale factor to use in its evaluation, as described below.

A calibration procedure (experimenting with a small subset of the data to be fitted and validating the results) may be needed to choose the most appropriate scale factor and RBF.

Local Method = POLYNOMIAL

, these option settings are ignored.

Local Method = HYBRID

RBF

, the following (conditionally) positive definite functions may be chosen.

Define

R = \sqrt{x^{2} + y^{2}}

and

ρ = R / r

$GAUSS$	Gaussian $\exp (- ρ^{2})$
$IMQ$	inverse multiquadric $1 / \sqrt{r^{2} + R^{2}}$
$IMQ2$	inverse multiquadric $1 / (r^{2} + R^{2})$
$IMQ3$	inverse multiquadric $1 / {(r^{2} + R^{2})}^{(3 / 2)}$
$IMQ0_5$	inverse multiquadric $1 / {(r^{2} + R^{2})}^{(1 / 4)}$
$WENDLAND31$	H. Wendland's $C^{2}$ function ${\max (0, 1 - ρ)}^{4} (4 ρ + 1)$
$WENDLAND32$	H. Wendland's $C^{4}$ function ${\max (0, 1 - ρ)}^{6} (35 ρ^{2} + 18 ρ + 3)$
$WENDLAND33$	H. Wendland's $C^{6}$ function ${\max (0, 1 - ρ)}^{8} (32 ρ^{3} + 25 ρ^{2} + 8 ρ + 1)$
$BUHMANNC3$	M. Buhmann's $C^{3}$ function $112 / 45 ρ^{(9 / 2)} + 16 / 3 ρ^{(7 / 2)} - 7 ρ^{4} - 14 / 15 ρ^{2} + 1 / 9$ if $ρ \leq 1$ , $0$ otherwise
$MQ$	multiquadric $\sqrt{r^{2} + R^{2}}$
$MQ1_5$	multiquadric ${(r^{2} + R^{2})}^{(1.5 / 2)}$
$POLYHARMONIC1_5$	polyharmonic spline $ρ^{1.5}$
$POLYHARMONIC1_75$	polyharmonic spline $ρ^{1.75}$

Local Method = HYBRID

the following conditionally positive definite functions may also be chosen.

$MQ2$	multiquadric $(r^{2} + R^{2}) \log (r^{2} + R^{2})$
$MQ3$	multiquadric ${(r^{2} + R^{2})}^{(3 / 2)}$
$TPS$	thin plate spline $ρ^{2} \log ρ^{2}$
$POLYHARMONIC3$	polyharmonic spline $ρ^{3}$
$TPS4$	thin plate spline $ρ^{4} \log ρ^{2}$
$POLYHARMONIC5$	polyharmonic spline $ρ^{5}$
$TPS6$	thin plate spline $ρ^{6} \log ρ^{2}$
$POLYHARMONIC7$	polyharmonic spline $ρ^{7}$
$POLYHARMONIC9$	polyharmonic spline $ρ^{9}$

Constraints:

if $Radial Basis Function = MQ2$ , $MQ3$ , $TPS$ or $POLYHARMONIC3$ , $Local Method = HYBRID$ and $Polynomial Starting Degree \geq 1$ ;
if $Radial Basis Function = TPS4$ or $POLYHARMONIC5$ , $Local Method = HYBRID$ and $Polynomial Starting Degree \geq 2$ ;
if $Radial Basis Function = TPS6$ or $POLYHARMONIC7$ , $Local Method = HYBRID$ and $Polynomial Starting Degree \geq 3$ ;
if $Radial Basis Function = POLYHARMONIC9$ , $Local Method = HYBRID$ and $Polynomial Starting Degree \geq 4$ ;
$Scaling Coefficient RBF > 0.0$ .

Separation LRBFA

r

Default

= 16.0 / Scaling Coefficient RBF

A knot-separation parameter used to control the condition number of the matrix used in each local RBF approximation (LRBFA). A smaller value may mean greater numerical stability but fewer knots.

Local Method = HYBRID

POLYNOMIAL

, this option setting is ignored.

Constraint:

Separation LRBFA > 0.0

Supersmooth C2

a

Default

= NO

Supersmooth C2 = YES

, the

C^{2}

spline is generated using additional smoothness constraints. This usually gives better results but at higher computational cost.

Global Smoothing Level = 1

this option setting is ignored.

Constraint:

Supersmooth C2 = YES

NO

NAG Library Manual, Mark 27.1

Interfaces: FL CL CPP AD

NAG FL Interface Introduction

E02 (Fit) Chapter Contents

E02 (Fit) Chapter Introduction

e02jd: FL CL CPP AD

NAG FL Interfacee02jdf (dim2_​spline_​ts_​sctr)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

11 Optional Parameters

11.1 Description of the Optional Parameters

NAG FL Interface
e02jdf (dim2_spline_ts_sctr)