d03ubf performs at each call one iteration of the Strongly Implicit Procedure. It is used to calculate on successive calls a sequence of approximate corrections to the current estimate of the solution when solving a system of simultaneous algebraic equations for which the iterative update matrix is of seven-point molecule form on a three-dimensional topologically-rectangular mesh. (‘Topological’ means that a polar grid

(r, θ)

, for example, can be used as it is equivalent to a rectangular box.)

2 Specification

Fortran Interface

Subroutine d03ubf (

n1, n2, n3, lda, sda, a, b, c, d, e, f, g, aparam, it, r, wrksp1, wrksp2, wrksp3, ifail)

Integer, Intent (In)	::	n1, n2, n3, lda, sda, it
Integer, Intent (Inout)	::	ifail
Real (Kind=nag_wp), Intent (In)	::	a(lda,sda,n3), b(lda,sda,n3), c(lda,sda,n3), d(lda,sda,n3), e(lda,sda,n3), f(lda,sda,n3), g(lda,sda,n3), aparam
Real (Kind=nag_wp), Intent (Inout)	::	r(lda,sda,n3), wrksp1(lda,sda,n3), wrksp2(lda,sda,n3), wrksp3(lda,sda,n3)

C Header Interface

#include <nag.h>

void

d03ubf_ (const Integer *n1, const Integer *n2, const Integer *n3, const Integer *lda, const Integer *sda, const double a[], const double b[], const double c[], const double d[], const double e[], const double f[], const double g[], const double *aparam, const Integer *it, double r[], double wrksp1[], double wrksp2[], double wrksp3[], Integer *ifail)

The routine may be called by the names d03ubf or nagf_pde_dim3_ellip_fd_iter.

3 Description

Given a set of simultaneous equations

M t = q

(1)

(which could be nonlinear) derived, for example, from a finite difference representation of a three-dimensional elliptic partial differential equation and its boundary conditions, the solution

t

may be obtained iteratively from a starting approximation

t^{(1)}

by the formulae

\begin{array}{lcl} r^{(n)} & = & q - M t^{(n)} \\ M s^{(n)} & = & r^{(n)} \\ t^{(n + 1)} & = & t^{(n)} + s^{(n)} . \end{array}

Thus

r^{(n)}

is the residual of the

n

th approximate solution

t^{(n)}

, and

s^{(n)}

is the update change vector.

d03ubf determines the approximate change vector

s

corresponding to a given residual

r

, i.e., it determines an approximate solution to a set of equations

M s = r

(2)

where

M

is a square

(n_{1} \times n_{2} \times n_{3})

(n_{1} \times n_{2} \times n_{3})

matrix and

r

is a known vector of length

(n_{1} \times n_{2} \times n_{3})

. The set of equations (2) must be of seven-diagonal form

a_{i j k} s_{i j, k - 1} + b_{i j k} s_{i, j - 1, k} + c_{i j k} s_{i - 1, j k} + d_{i j k} s_{i j k} + e_{i j k} s_{i + 1, j k} + f_{i j k} s_{i, j + 1, k} + g_{i j k} s_{i j, k + 1} = r_{i j k}

for

i = 1, 2, \dots, n_{1}

j = 1, 2, \dots, n_{2}

and

k = 1, 2, \dots, n_{3}

, provided that

d_{i j k} \neq 0.0

. Indeed, if

d_{i j k} = 0.0

, then the equation is assumed to be

s_{i j k} = r_{i j k} .

The calling program supplies the current residual

r

at each iteration and the coefficients of the seven-point molecule system of equations on which the update procedure is based. The routine performs one iteration, using the approximate

L U

factorization of the Strongly Implicit Procedure with the necessary acceleration argument adjustment, to calculate the approximate solution

s

of the set of equations (2). The change

s

overwrites the residual array for return to the calling program. The calling program must combine this change stored in

r

with the old approximation to obtain the new approximate solution for

t

. It must then recalculate the residuals and, if the accuracy requirements have not been satisfied, commence the next iterative cycle.

Clearly there is no requirement that the iterative update matrix passed in the form of the seven-diagonal element arrays a, b, c, d, e, f and g is the same as that used to calculate the residuals, and, therefore, the one governing the problem. However, the convergence may be impaired if they are not equal. Indeed, if the system of equations (1) is not precisely of the seven-diagonal form illustrated above but has a few additional terms, then the methods of deferred or defect correction can be employed. The residual is calculated by the calling program using the full system of equations, but the update formula is based on a seven-diagonal system (2) of the form given above. For example, the solution of a system of eleven-diagonal equations each involving the combination of terms with

t_{i \pm 1, j \pm 1, k}, t_{i \pm 1, j, k}, t_{i, j \pm 1, k}, t_{i, j, k \pm 1}

and

t_{i j k}

could use the seven-diagonal coefficients on which to base the update, provided these incorporate the major features of the equations.

Problems in topologically non-rectangular box-shaped regions can be solved using the routine by surrounding the region with a circumscribing topologically rectangular box. The equations for the nodal values external to the region of interest are set to zero (i.e.,

d_{i j k} = r_{i j k} = 0

) and the boundary conditions are incorporated into the equations for the appropriate nodes.

If there is no better initial approximation when starting the iterative cycle, one can use an array of all zeros as the initial approximation from which the first set of residuals are determined.

The routine can be used to solve linear elliptic equations in which case the arrays a, b, c, d, e, f and g and the quantities

q

will be unchanged during the iterative cycles, or for solving nonlinear elliptic equations in which case some or all of these arrays may require updating as each new approximate solution is derived. Depending on the nonlinearity, some under-relaxation of the coefficients and/or source terms may be needed during their recalculation using the new estimates of the solution (see Jacobs (1972)).

The routine can also be used to solve each step of a time-dependent parabolic equation in three space dimensions. The solution at each time step can be expressed in terms of an elliptic equation if the Crank–Nicolson or other form of implicit time integration is used.

Neither diagonal dominance, nor positive-definiteness, of the matrix

M

or of the update matrix formed from the arrays a, b, c, d, e, f and g is necessary to ensure convergence.

For problems in which the solution is not unique, in the sense that an arbitrary constant can be added to the solution (for example Poisson's equation with all Neumann boundary conditions), the calling program should subtract a typical nodal value from the whole solution

t

at every iteration to keep rounding errors to a minimum for those cases when convergence is slow. For such problems there is generally an associated compatibility condition. For the example mentioned this compatibility condition equates the total net source within the region (i.e., the source integrated over the region) with the total net outflow across the boundaries defined by the Neumann conditions (i.e., the normal derivative integrated along the whole boundary). It is very important that the algebraic equations derived to model such a problem accurately implement the compatibility condition. If they do not, a net source or sink is very likely to be represented by the set of algebraic equations and no steady-state solution of the equations exists.

4 References

Ames W F (1977) Nonlinear Partial Differential Equations in Engineering (2nd Edition) Academic Press

Jacobs D A H (1972) The strongly implicit procedure for the numerical solution of parabolic and elliptic partial differential equations Note RD/L/N66/72 Central Electricity Research Laboratory

Stone H L (1968) Iterative solution of implicit approximations of multi-dimensional partial differential equations SIAM J. Numer. Anal. 5 530–558

Weinstein H G, Stone H L and Kwan T V (1969) Iterative procedure for solution of systems of parabolic and elliptic equations in three dimensions Industrial and Engineering Chemistry Fundamentals 8 281–287

5 Arguments

1: $n1$ – Integer Input: On entry: the number of nodes in the first coordinate direction, $n_{1}$ .

Constraint: $n1 > 1$ .
2: $n2$ – Integer Input: On entry: the number of nodes in the second coordinate direction, $n_{2}$ .

Constraint: $n2 > 1$ .
3: $n3$ – Integer Input: On entry: the number of nodes in the third coordinate direction, $n_{3}$ .

Constraint: $n3 > 1$ .
4: $lda$ – Integer Input: On entry: the first dimension of the arrays a, b, c, d, e, f, g, r, wrksp1, wrksp2 and wrksp3 as declared in the (sub)program from which d03ubf is called.

Constraint: $lda \geq n1$ .
5: $sda$ – Integer Input: On entry: the second dimension of the arrays a, b, c, d, e, f, g, r, wrksp1, wrksp2 and wrksp3 as declared in the (sub)program from which d03ubf is called.

Constraint: $sda \geq n2$ .
6: $a (lda, sda, n3)$ – Real (Kind=nag_wp) array Input: On entry: $a (i, j, k)$ must contain the coefficient of $s_{i j, k - 1}$ in the $(i, j, k)$ th equation of the system (2), for $i = 1, 2, \dots, n1$ , $j = 1, 2, \dots, n2$ and $k = 1, 2, \dots, n3$ . The elements of a, for $k = 1$ , must be zero after incorporating the boundary conditions, since they involve nodal values from outside the box.
7: $b (lda, sda, n3)$ – Real (Kind=nag_wp) array Input: On entry: $b (i, j, k)$ must contain the coefficient of $s_{i, j - 1, k}$ in the $(i, j, k)$ th equation of the system (2), for $i = 1, 2, \dots, n1$ , $j = 1, 2, \dots, n2$ and $k = 1, 2, \dots, n3$ . The elements of b, for $j = 1$ , must be zero after incorporating the boundary conditions, since they involve nodal values from outside the box.
8: $c (lda, sda, n3)$ – Real (Kind=nag_wp) array Input: On entry: $c (i, j, k)$ must contain the coefficient of $s_{i - 1, j, k}$ in the $(i, j, k)$ th equation of the system (2), for $i = 1, 2, \dots, n1$ , $j = 1, 2, \dots, n2$ and $k = 1, 2, \dots, n3$ . The elements of c, for $i = 1$ , must be zero after incorporating the boundary conditions, since they involve nodal values from outside the box.
9: $d (lda, sda, n3)$ – Real (Kind=nag_wp) array Input: On entry: $d (i, j, k)$ must contain the coefficient of $s_{i j k}$ , the ‘central’ term, in the $(i, j, k)$ th equation of the system (2), for $i = 1, 2, \dots, n1$ , $j = 1, 2, \dots, n2$ and $k = 1, 2, \dots, n3$ . The elements of d are checked to ensure that they are nonzero. If any element is found to be zero, the corresponding algebraic equation is assumed to be $s_{i j k} = r_{i j k}$ . This feature can be used to define the equations for nodes at which, for example, Dirichlet boundary conditions are applied, or for nodes external to the problem of interest, by setting $d (i, j, k) = 0.0$ at appropriate points. The corresponding value of $r_{i j k}$ is set equal to the appropriate value, namely the difference between the prescribed value of $t_{i j k}$ and the current value in the Dirichlet case, or zero at an external point.
10: $e (lda, sda, n3)$ – Real (Kind=nag_wp) array Input: On entry: $e (i, j, k)$ must contain the coefficient of $s_{i + 1, j, k}$ in the $(i, j, k)$ th equation of the system (2), for $i = 1, 2, \dots, n1$ , $j = 1, 2, \dots, n2$ and $k = 1, 2, \dots, n3$ . The elements of e, for $i = n1$ , must be zero after incorporating the boundary conditions, since they involve nodal values from outside the box.
11: $f (lda, sda, n3)$ – Real (Kind=nag_wp) array Input: On entry: $f (i, j, k)$ must contain the coefficient of $s_{i, j + 1, k}$ in the $(i, j, k)$ th equation of the system (2), for $i = 1, 2, \dots, n1$ , $j = 1, 2, \dots, n2$ and $k = 1, 2, \dots, n3$ . The elements of f, for $j = n2$ , must be zero after incorporating the boundary conditions, since they involve nodal values from outside the box.
12: $g (lda, sda, n3)$ – Real (Kind=nag_wp) array Input: On entry: $g (i, j, k)$ must contain the coefficient of $s_{i, j, k + 1}$ in the $(i, j, k)$ th equation of the system (2), for $i = 1, 2, \dots, n1$ , $j = 1, 2, \dots, n2$ and $k = 1, 2, \dots, n3$ . The elements of g, for $k = n3$ , must be zero after incorporating the boundary conditions, since they involve nodal values from outside the box.
13: $aparam$ – Real (Kind=nag_wp) Input: On entry: the iteration acceleration factor. A value of $1.0$ is adequate for most typical problems. However, if convergence is slow, the value can be reduced, typically to $0.2$ or $0.1$ . If divergence is obtained, the value can be increased, typically to $2.0$ , $5.0$ or $10.0$ .

Constraint: $0.0 < aparam \leq ({(n1 - 1)}^{2} + {(n2 - 1)}^{2} + {(n3 - 1)}^{2}) / 3.0$ .
14: $it$ – Integer Input: On entry: the iteration number. It must be initialized, but not necessarily to $1$ , before the first call, and should be incremented by one in the calling program for each subsequent call. The routine uses this counter to select the appropriate acceleration argument from a sequence of nine, each one being used twice in succession. (Note that the acceleration argument depends on the value of aparam.)
15: $r (lda, sda, n3)$ – Real (Kind=nag_wp) array Input/Output: On entry: the current residual $r_{i j k}$ on the right-hand side of the $(i, j, k)$ th equation of the system (2), for $i = 1, 2, \dots, n1$ , $j = 1, 2, \dots, n2$ and $k = 1, 2, \dots, n3$ .

On exit: these residuals are overwritten by the corresponding components of the solution $s$ of the system (2), i.e., the changes to be made to the vector $t$ to reduce the residuals supplied.
16: $wrksp1 (lda, sda, n3)$ – Real (Kind=nag_wp) array Workspace
17: $wrksp2 (lda, sda, n3)$ – Real (Kind=nag_wp) array Workspace
18: $wrksp3 (lda, sda, n3)$ – Real (Kind=nag_wp) array Workspace
19: $ifail$ – Integer Input/Output: On entry: ifail must be set to $0$ , $- 1$ or $1$ to set behaviour on detection of an error; these values have no effect when no error is detected.
A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $- 1$ means that an error message is printed while a value of $1$ means that it is not.

If halting is not appropriate, the value $- 1$ or $1$ is recommended. If message printing is undesirable, then the value $1$ is recommended. Otherwise, the value $0$ is recommended. When the value $- 1$ or $1$ is used it is essential to test the value of ifail on exit.

On exit: $ifail = 0$ unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

ifail = 0

- 1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 1$: On entry, $n1 = ⟨ value ⟩$ .
Constraint: $n1 > 1$ .

On entry, $n2 = ⟨ value ⟩$ .
Constraint: $n2 > 1$ .

On entry, $n3 = ⟨ value ⟩$ .
Constraint: $n3 > 1$ .

$ifail = 2$: On entry, $lda = ⟨ value ⟩$ and $n1 = ⟨ value ⟩$ .
Constraint: $lda \geq n1$ .

On entry, $sda = ⟨ value ⟩$ and $n2 = ⟨ value ⟩$ .
Constraint: $sda \geq n2$ .

$ifail = 3$: On entry, $aparam = ⟨ value ⟩$ .
Constraint: $aparam > 0.0$ .

$ifail = 4$: On entry, $aparam = ⟨ value ⟩$ , $n1 = ⟨ value ⟩$ , $n2 = ⟨ value ⟩$ and $n3 = ⟨ value ⟩$ .
Constraint: $aparam \leq ({(n1 - 1)}^{2} + {(n2 - 1)}^{2} + {(n3 - 1)}^{2}) / 3$ .

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

The improvement in accuracy for each iteration, i.e., on each call, depends on the size of the system and on the condition of the update matrix characterised by the seven-diagonal coefficient arrays. The ultimate accuracy obtainable depends on the above factors and on the machine precision. However, since d03ubf works with residuals and the update vector, the calling program can, in most cases where at each iteration all the residuals are usually of about the same size, calculate the residuals from extended precision values of the function, source term and equation coefficients if greater accuracy is required. The rate of convergence obtained with the Strongly Implicit Procedure is not always smooth because of the cyclic use of nine acceleration arguments. The convergence may become slow with very large problems. The final accuracy obtained can be judged approximately from the rate of convergence determined from the changes to the dependent variable

t

and in particular the change on the last iteration.

8 Parallelism and Performance

d03ubf is not threaded in any implementation.

9 Further Comments

The time taken is approximately proportional to

n1 \times n2 \times n3

for each call.

When used with deferred or defect correction, the residual is calculated in the calling program from a different system of equations to those represented by the seven-point molecule coefficients used by d03ubf as the basis of the iterative update procedure. When using deferred correction the overall rate of convergence depends not only on the items detailed in Section 7 but also on the difference between the two coefficient matrices used.

Convergence may not always be obtained when the problem is very large and/or the coefficients of the equations have widely disparate values. The latter case may be associated with an ill-conditioned matrix.

10 Example

This example solves Laplace's equation in a rectangular box with a non-uniform grid spacing in the

x

y

and

z

coordinate directions and with Dirichlet boundary conditions specifying the function on the surfaces of the box equal to

e^{(1.0 + x) / y (n_{2})} \times \cos (\sqrt{2} y / y (n_{2})) \times e^{(- 1.0 - z) / y (n_{2})} .

Note that this is the same problem as that solved in the example for d03ecf. The differences in the maximum residuals obtained at each iteration between the two test runs are explained by the fact that in d03ecf the residual at each node is normalized by dividing by the central coefficient, whereas this normalization has not been used in the example program for d03ubf.

d03ub: FL CL CPP AD

NAG FL Interfaced03ubf (dim3_​ellip_​fd_​iter)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG FL Interface
d03ubf (dim3_ellip_fd_iter)