NAG FL Interface
d02nwf (ivp_​stiff_​blend)

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

1: $\mathbf{neqmax}$ – Integer Input

On entry: a bound on the maximum number of differential equations to be solved.

Constraint: $\mathbf{neqmax}\ge 1$.

2: $\mathbf{sdysav}$ – Integer Input

On entry: the second dimension of the array ysav that will be supplied to the integrator, as declared in the (sub)program from which the integrator is called (e.g., see d02nbf).

Constraint: $\mathbf{sdysav}\ge \mathbf{maxord}+3$.

3: $\mathbf{maxord}$ – Integer Input

On entry: the maximum order to be used for the BLEND method.

Constraint: $0<\mathbf{maxord}\le 11$.

4: $\mathbf{con}\left(6\right)$ – Real (Kind=nag_wp) array Input/Output

On entry: values to be used to control step size choice during integration. If any $\mathbf{con}\left(i\right)=0.0$ on entry, it is replaced by its default value described below. In most cases this is the recommended setting.

$\mathbf{con}\left(1\right)$, $\mathbf{con}\left(2\right)$, and $\mathbf{con}\left(3\right)$ are factors used to bound step size changes. If the current step size $h$ fails, the modulus of the next step size is bounded by $\mathbf{con}\left(1\right)\times \left|h\right|$. The default value of $\mathbf{con}\left(1\right)$ is $2.0$. Note that the new step size may be used with a method of different order to the failed step. If the initial step size is $h$, the modulus of the step size on the second step is bounded by $\mathbf{con}\left(3\right)\times \left|h\right|$. At any other stage in the integration, if the current step size is $h$, the modulus of the next step size is bounded by $\mathbf{con}\left(2\right)\times \left|h\right|$. The default values are $10.0$ for $\mathbf{con}\left(2\right)$ and $1000.0$ for $\mathbf{con}\left(3\right)$.

$\mathbf{con}\left(4\right)$, $\mathbf{con}\left(5\right)$ and $\mathbf{con}\left(6\right)$ are ‘tuning’ constants used in determining the next order and step size. They are used to scale the error estimates used in determining whether to keep the same order of the BLEND method, decrease the order or increase the order respectively. The larger the value of $\mathbf{con}\left(\mathit{i}\right)$, for $\mathit{i}=4,5,6$, the less likely the choice of the corresponding order. The default values are: $\mathbf{con}\left(4\right)=1.2$, $\mathbf{con}\left(5\right)=1.3$, $\mathbf{con}\left(6\right)=1.4$.

Constraints:

These constraints must be satisfied after any zero values have been replaced by their default values.

• $0.0<\mathbf{con}\left(1\right)\le \mathbf{con}\left(2\right)\le \mathbf{con}\left(3\right)$;
• $\mathbf{con}\left(\mathit{i}\right)\ge 1.0$, for $\mathit{i}=2,3,\dots ,6$.

On exit: the values actually used by d02nwf.

5: $\mathbf{tcrit}$ – Real (Kind=nag_wp) Input

On entry: a point beyond which integration must not be attempted. The use of tcrit is described under the argument itask in the specification for the integrator (e.g., see d02nbf). A value, $0.0$ say, must be specified even if itask subsequently specifies that tcrit will not be used.

6: $\mathbf{hmin}$ – Real (Kind=nag_wp) Input

On entry: the minimum absolute step size to be allowed. Set $\mathbf{hmin}=0.0$ if this option is not required.

7: $\mathbf{hmax}$ – Real (Kind=nag_wp) Input

On entry: the maximum absolute step size to be allowed. Set $\mathbf{hmax}=0.0$ if this option is not required.

8: $\mathbf{h0}$ – Real (Kind=nag_wp) Input

On entry: the step size to be attempted on the first step. Set $\mathbf{h0}=0.0$ if the initial step size is calculated internally.

9: $\mathbf{maxstp}$ – Integer Input

On entry: the maximum number of steps to be attempted during one call to the integrator after which it will return with $\mathbf{ifail}=\mathbf{2}$. Set $\mathbf{maxstp}=0$ if no limit is to be imposed.

10: $\mathbf{mxhnil}$ – Integer Input

On entry: the maximum number of warnings printed (if $\mathbf{itrace}\ge 0$, e.g., see d02nbf) per problem when $t+h=t$ on a step ($h=\text{ current step size}$). If $\mathbf{mxhnil}\le 0$, a default value of $10$ is assumed.

11: $\mathbf{norm}$ – Character(1) Input

On entry: indicates the type of norm to be used.

$\mathbf{norm}=\text{'M'}$

Maximum norm.

$\mathbf{norm}=\text{'A'}$

Averaged L2 norm.

$\mathbf{norm}=\text{'D'}$

Is the same as 'A'.

If $\mathit{vnorm}$ denotes the norm of the vector $v$ of length $n$, for the averaged L2 norm

$$\mathit{vnorm}=\sqrt{\frac{1}{n}\sum _{i=1}^n{(v_i/w_i)}^2}\text{,}$$

while for the maximum norm

$$\mathit{vnorm}=\underset{i}{\max }|v_i/w_i|\text{.}$$

If you wish to weight the maximum norm or the L2 norm, rtol and atol should be scaled appropriately on input to the integrator (see under itol in the specification of the integrator for the formulation of the weight vector $w_i$ from rtol and atol, e.g., d02nbf).

Only the first character of the actual argument norm is passed to d02nwf; hence it is permissible for the actual argument to be more descriptive e.g., ‘Maximum’, ‘Average L2’ or ‘Default’ in a call to d02nwf.

Constraint: $\mathbf{norm}=\text{'M'}$, $\text{'A'}$ or $\text{'D'}$.

12: $\mathbf{rwork}\left(50+4\times \mathbf{neqmax}\right)$ – Real (Kind=nag_wp) array Communication Array

This must be the same workspace array as the array rwork supplied to the integrator. It is used to pass information from the setup routine to the integrator and, therefore, the contents of this array must not be changed before calling the integrator.

13: $\mathbf{ifail}$ – Integer Input/Output

On entry: ifail must be set to $0$, $-1$ or $1$ to set behaviour on detection of an error; these values have no effect when no error is detected.

A value of $0$ causes the printing of an error message and program execution will be halted; otherwise program execution continues. A value of $-1$ means that an error message is printed while a value of $1$ means that it is not.

If halting is not appropriate, the value $-1$ or $1$ is recommended. If message printing is undesirable, then the value $1$ is recommended. Otherwise, the value $0$ is recommended. When the value $-\mathbf{1}$ or $\mathbf{1}$ is used it is essential to test the value of ifail on exit.

On exit: $\mathbf{ifail}=\mathbf{0}$ unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

$\mathbf{ifail}=1$

On entry, $\mathbf{con}\left(⟨\mathit{\text{value}}⟩\right)=⟨\mathit{\text{value}}⟩$ was less than $0.0$.

On entry, $\mathbf{con}\left(⟨\mathit{\text{value}}⟩\right)=⟨\mathit{\text{value}}⟩$ was less than $1.0$.

On entry, $\mathbf{con}\left(1\right)=⟨\mathit{\text{value}}⟩$ and $\mathbf{con}\left(2\right)=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{con}\left(1\right)\le \mathbf{con}\left(2\right)$.

On entry, $\mathbf{con}\left(2\right)=⟨\mathit{\text{value}}⟩$ and $\mathbf{con}\left(3\right)=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{con}\left(2\right)\le \mathbf{con}\left(3\right)$.

On entry, $\mathbf{maxord}=⟨\mathit{\text{value}}⟩$.
Constraint: $0<\mathbf{maxord}\le 11$.

On entry, $\mathbf{maxord}=⟨\mathit{\text{value}}⟩$ and $\mathbf{sdysav}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{sdysav}\ge \mathbf{maxord}+3$.

On entry, $\mathbf{neqmax}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{neqmax}\ge 1$.

On entry, $\mathbf{norm}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{norm}=\text{'M'}$, $\text{'A'}$ or $\text{'D'}$.

$\mathbf{ifail}=-99$

An unexpected error has been triggered by this routine. Please contact NAG.

See Section 7 in the Introduction to the NAG Library FL Interface for further information.

$\mathbf{ifail}=-399$

Your licence key may have expired or may not have been installed correctly.

See Section 8 in the Introduction to the NAG Library FL Interface for further information.

$\mathbf{ifail}=-999$

Dynamic memory allocation failed.

See Section 9 in the Introduction to the NAG Library FL Interface for further information.

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example