NAG Library Function Document

nag_tsa_inhom_iema (g13mec)

void	nag_tsa_inhom_iema (Integer nb, double iema[], const double t[], double tau, Integer m, const double sinit[], const Nag_TS_Interpolation inter[], Integer pn, double rcomm[], NagError fail)

3 Description

nag_tsa_inhom_iema (g13mec) calculates the iterated exponential moving average for an inhomogeneous time series. The time series is represented by two vectors of length

n

; a vector of times,

t

; and a vector of values,

z

. Each element of the time series is therefore composed of the pair of scalar values

(t_{i}, z_{i})

, for

i = 1, 2, \dots, n

. Time can be measured in any arbitrary units, as long as all elements of

t

use the same units.

The exponential moving average (EMA), with parameter

τ

, is an average operator, with the exponentially decaying kernel given by

\frac{e^{- t_{i} / τ}}{τ} .

The exponential form of this kernel gives rise to the following iterative formula for the EMA operator (see Zumbach and Müller (2001)):

EMA [τ; z] (t_{i}) = μ EMA [τ; z] (t_{i - 1}) + (ν - μ) z_{i - 1} + (1 - ν) z_{i}

where

μ = e^{- α} and α = \frac{t_{i} - t_{i - 1}}{τ} .

The value of

ν

depends on the method of interpolation chosen. nag_tsa_inhom_iema (g13mec) gives the option of three interpolation methods:

1.	Previous point:	$ν = 1$ ;
2.	Linear:	$ν = (1 - μ) / α$ ;
3.	Next point:	$ν = μ$ .

The

m

-iterated exponential moving average,

EMA [τ, m; z] (t_{i})

m > 1

, is defined using the recursive formula:

EMA [τ, m; z] = EMA [τ; EMA [τ, m - 1; z]]

with

EMA [τ, 1; z] = EMA [τ; z] .

For large datasets or where all the data is not available at the same time,

z

and

t

can be split into arbitrary sized blocks and nag_tsa_inhom_iema (g13mec) called multiple times.

4 References

Dacorogna M M, Gencay R, Müller U, Olsen R B and Pictet O V (2001) An Introduction to High-frequency Finance Academic Press

Zumbach G O and Müller U A (2001) Operators on inhomogeneous time series International Journal of Theoretical and Applied Finance 4(1) 147–178

5 Arguments

1: $nb$ – IntegerInput

On entry:

b

, the number of observations in the current block of data. The size of the block of data supplied in iema and t can vary; therefore nb can change between calls to nag_tsa_inhom_iema (g13mec).

Constraint:

nb \geq 0

2: $iema [nb]$ – doubleInput/Output

On entry:

z_{i}

, the current block of observations, for

i = k + 1, \dots, k + b

, where

k

is the number of observations processed so far, i.e., the value supplied in pn on entry.

On exit: the iterated EMA, with

iema [i - 1] = EMA [τ, m; z] (t_{i})

3: $t [nb]$ – const doubleInput

On entry:

t_{i}

, the times for the current block of observations, for

i = k + 1, \dots, k + b

, where

k

is the number of observations processed so far, i.e., the value supplied in pn on entry.

t_{i} \leq t_{i - 1}

fail . code =

NE_NOT_STRICTLY_INCREASING will be returned, but nag_tsa_inhom_iema (g13mec) will continue as if

t

was strictly increasing by using the absolute value.

4: $tau$ – doubleInput

On entry:

τ

, the argument controlling the rate of decay, which must be sufficiently large that

e^{- α}

α = (t_{i} - t_{i - 1}) / τ

can be calculated without overflowing, for all

i

Constraint:

tau > 0.0

5: $m$ – IntegerInput

On entry:

m

, the number of times the EMA operator is to be iterated.

Constraint:

m \geq 1

6: $sinit [m + 2]$ – const doubleInput

On entry: if

pn = 0

, the values used to start the iterative process, with

$sinit [0] = t_{0}$ ,
$sinit [1] = z_{0}$ ,
$sinit [j + 1] = EMA [τ, j; z] (t_{0})$ , for $j = 1, 2, \dots, m$ .

pn \neq 0

, sinit is not referenced and may be NULL.

7: $inter [2]$ – const Nag_TS_InterpolationInput

On entry: the type of interpolation used with

inter [0]

indicating the interpolation method to use when calculating

EMA [τ, 1; z]

and

inter [1]

the interpolation method to use when calculating

EMA [τ, j; z]

j > 1

Three types of interpolation are possible:

$inter [i] = Nag_PreviousPoint$: Previous point, with $ν = 1$ .
$inter [i] = Nag_Linear$: Linear, with $ν = (1 - μ) / α$ .
$inter [i] = Nag_NextPoint$: Next point, $ν = μ$ .

Zumbach and Müller (2001) recommend that linear interpolation is used in second and subsequent iterations, i.e.,

inter [1] = Nag_Linear

, irrespective of the interpolation method used at the first iteration, i.e., the value of

inter [0]

Constraint:

inter [i - 1] = Nag_PreviousPoint

Nag_Linear

Nag_NextPoint

, for

i = 1, 2

8: $pn$ – Integer *Input/Output

On entry:

k

, the number of observations processed so far. On the first call to nag_tsa_inhom_iema (g13mec), or when starting to summarise a new dataset, pn must be set to

0

. On subsequent calls it must be the same value as returned by the last call to nag_tsa_inhom_iema (g13mec).

On exit:

k + b

, the updated number of observations processed so far.

Constraint:

pn \geq 0

9: $rcomm [m + 20]$ – doubleCommunication Array

On entry: communication array, used to store information between calls to nag_tsa_inhom_iema (g13mec). If

rcomm is NULL

then pn must be set to zero and all the data must be supplied in one go.

10: $fail$ – NagError *Input/Output

The NAG error argument (see Section 3.6 in the Essential Introduction).

6 Error Indicators and Warnings

NE_ALLOC_FAIL: Dynamic memory allocation failed.
See Section 3.2.1.2 in the Essential Introduction for further information.
NE_BAD_PARAM: On entry, argument $〈value〉$ had an illegal value.
NE_ILLEGAL_COMM: rcomm has been corrupted between calls.
NE_INT: On entry, $m = 〈value〉$ .
Constraint: $m \geq 1$ .

On entry, $nb = 〈value〉$ .
Constraint: $nb \geq 0$ .

On entry, $pn = 〈value〉$ .
Constraint: $pn \geq 0$ .
NE_INTERNAL_ERROR: An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.

An unexpected error has been triggered by this function. Please contact NAG.
See Section 3.6.6 in the Essential Introduction for further information.
NE_NO_LICENCE: Your licence key may have expired or may not have been installed correctly.
See Section 3.6.5 in the Essential Introduction for further information.
NE_NOT_STRICTLY_INCREASING: On entry, $i = 〈value〉$ , $t [i - 2] = 〈value〉$ and $t [i - 1] = 〈value〉$ .
Constraint: t should be strictly increasing.
NE_PREV_CALL: If $pn > 0$ then inter must be unchanged since previous call.

On entry, $m = 〈value〉$ .
On entry at previous call, $m = 〈value〉$ .
Constraint: if $pn > 0$ then m must be unchanged since previous call.

On entry, $pn = 〈value〉$ .
On exit from previous call, $pn = 〈value〉$ .
Constraint: if $pn > 0$ then pn must be unchanged since previous call.

On entry, $tau = 〈value〉$ .
On entry at previous call, $tau = 〈value〉$ .
Constraint: if $pn > 0$ then tau must be unchanged since previous call.
NE_REAL: On entry, $tau = 〈value〉$ .
Constraint: $tau > 0.0$ .
NE_REAL_ARRAY: On entry, $i = 〈value〉$ , $t [i - 2] = 〈value〉$ and $t [i - 1] = 〈value〉$ .
Constraint: $t [i - 1] \neq t [i - 2]$ if linear interpolation is being used.
NW_OVERFLOW_WARN: Truncation occurred to avoid overflow, check for extreme values in t, iema or for tau. Results are returned using the truncated values.

7 Accuracy

Not applicable.

8 Parallelism and Performance

nag_tsa_inhom_iema (g13mec) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.

nag_tsa_inhom_iema (g13mec) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9 Further Comments

Approximately

4 m

real elements are internally allocated by nag_tsa_inhom_iema (g13mec).

The more data you supply to nag_tsa_inhom_iema (g13mec) in one call, i.e., the larger nb is, the more efficient the function will be.

Checks are made during the calculation of

α

to avoid overflow. If a potential overflow is detected the offending value is replaced with a large positive or negative value, as appropriate, and the calculations performed based on the replacement values. In such cases

fail . code =

NW_OVERFLOW_WARN is returned. This should not occur in standard usage and will only occur if extreme values of iema, t or tau are supplied.

10 Example

The example reads in a simulated time series,

(t, z)

and calculates the iterated exponential moving average.

This example plot shows the exponential moving average for the same data using three different values of

τ

and illustrates the effect on the EMA of altering this argument.

nag_tsa_inhom_iema (g13mec) (PDF version)

g13 Chapter Contents

g13 Chapter Introduction

NAG Library Manual

NAG Library Function Documentnag_tsa_inhom_iema (g13mec)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG Library Function Document

nag_tsa_inhom_iema (g13mec)