Integer, Intent (In)	::	nobs, nvar, levels(nvar), lvnames
Integer, Intent (Inout)	::	ifail
Character (*), Intent (In)	::	vnames(lvnames)
Type (c_ptr), Intent (Inout)	::	hddesc

C Header Interface

#include nagmk26.h

void	g22ybf_ ( void *hddesc, const Integer nobs, const Integer nvar, const Integer levels[], const Integer lvnames, const char vnames[], Integer *ifail, const Charlen length_vnames)

3

Description

Let

D

denote a data matrix with

n

observations on

m_{d}

independent variables, denoted

V_{1}, V_{2}, \dots, V_{m_{d}}

. The

j

th independent variable,

V_{j}

can be classified as either binary, categorical, ordinal or continuous, where:

Binary: $V_{j}$ can take the value $1$ or $0$ .
Categorical: $V_{j}$ can take one of $L_{j}$ distinct values or levels. Each level represents a discrete category but does not necessarily imply an ordering. The value used to represent each level is therefore arbitrary and, by convention and for convenience, is taken to be the integers from $1$ to $L_{j}$ .
Ordinal: As with a categorical variable $V_{j}$ can take one of $L_{j}$ distinct values or levels. However, unlike a categorical variable, the levels of an ordinal variable imply an ordering and hence the value used to represent each level is not arbitrary. For example, $V_{j} = 4$ implies a value that is twice as large as $V_{j} = 2$ .
Continuous: $V_{j}$ can take any real value.

g22ybf returns a G22 handle containing a description of a data matrix,

D

. The data matrix makes no distinction between binary, ordinal or continuous variables.

A name can also be assigned to each variable. If names are not supplied then the default vector of names,

\{'V1','V2', \dots\}

is used.

4

References

None.

5

Arguments

1: $hddesc$ – Type (c_ptr)Input/Output: On entry: must be set to c_null_ptr.
As an alternative an existing G22 handle may be supplied in which case this routine will destroy the supplied G22 handle as if g22zaf had been called.

On exit: holds a G22 handle to the internal data structure containing a description of the data matrix, $D$ . You must not change the G22 handle other than through the routines in Chapter G22.
2: $nobs$ – IntegerInput: On entry: $n$ , the number of observations in the data matrix, $D$ .

Constraint: $nobs \geq 0$ .
3: $nvar$ – IntegerInput: On entry: $m_{d}$ , the number of variables in the data matrix, $D$ .

Constraint: $nvar \geq 0$ .
4: $levels (nvar)$ – Integer arrayInput: On entry: $levels (j)$ contains the number of levels associated with the $j$ th variable of the data matrix, for $j = 1, 2, \dots, nvar$ .
If the $j$ th variable is binary, ordinal or continuous, $levels (j)$ should be set to $1$ ; otherwise $levels (j)$ should be set to the number of levels associated with the $j$ th variable and the corresponding column of the data matrix is assumed to take the value $1$ to $levels (j)$ .

Constraint: $levels (i) \geq 1$ , for $i = 1, 2, \dots, nvar$ .
5: $lvnames$ – IntegerInput: On entry: the number of variable names supplied in vnames.

Constraint: $lvnames = 0$ or $nvar$ .
6: $vnames (lvnames)$ – Character(*) arrayInput: On entry: if $lvnames \neq 0$ , $vnames (j)$ must contain the name of the $j$ th variable, for $j = 1, 2, \dots, nvar$ . If $lvnames = 0$ , vnames is not referenced.
The names supplied in vnames should be at most $50$ characters long and be unique. If a name longer than $50$ characters is supplied it will be truncated.

Variable names must not contain any of the characters +.*-:^()@.
7: $ifail$ – IntegerInput/Output: On entry: ifail must be set to $0$ , $- 1 or 1$ . If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value $- 1 or 1$ is recommended. If the output of error messages is undesirable, then the value $1$ is recommended. Otherwise, if you are not familiar with this argument, the recommended value is $0$ . When the value $- 1 or 1$ is used it is essential to test the value of ifail on exit.

On exit: $ifail = 0$ unless the routine detects an error or a warning has been flagged (see Section 6).

6

Error Indicators and Warnings

If on entry

ifail = 0

- 1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 11$: On entry, hddesc is not c_null_ptr or a recognised G22 handle.

$ifail = 21$: On entry, $nobs = 〈value〉$ .
Constraint: $nobs \geq 0$ .

$ifail = 31$: On entry, $nvar = 〈value〉$ .
Constraint: $nvar \geq 0$ .

$ifail = 41$: On entry, $j = 〈value〉$ and $levels (j) = 〈value〉$
Constraint: $levels (i) \geq 1$ .

$ifail = 51$: On entry, $lvnames = 〈value〉$ and $nvar = 〈value〉$ .
Constraint: $lvnames = 0$ or $nvar$ .

$ifail = 61$: On entry, variable name $i$ contains one more invalid characters, $i = 〈value〉$ .

$ifail = 62$: On entry, variable names $i$ and $j$ are not unique, $i = 〈value〉$ and $j = 〈value〉$ .

$ifail = 63$: On entry, variable names $i$ and $j$ are not unique (possibly due to truncation), $i = 〈value〉$ and $j = 〈value〉$ .
Maximum variable name length is $50$ .

$ifail = 64$: At least one variable name was truncated to $50$ characters. Each truncated name is unique and will be used in all output.

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

7

Accuracy

Not applicable.

8

Parallelism and Performance

g22ybf is not threaded in any implementation.

9

Further Comments

None.

10

Example

This example performs a linear regression using g02daf. The linear regression model is defined via a text string which is parsed using g22yaf. The corresponding design matrix associated with the model and the dataset described via a call to g22ybf is generated using g22ycf.

Verbose labels for the parameters of the model are constructed using information returned in vinfo by g22ydf.

See also the examples in g22yaf, g22ycf and g22ydf.

11

Optional Parameters

As well as the optional parameters common to all G22 handles described in g22zmf and g22znf, a number of additional optional parameters can be specified for a G22 handle holding the description of a data matrix as returned by g22ybf in hddesc.

Each writeable optional parameter has an associated default value; to set any of them to a non-default value, use g22zmf. The value of an optional parameter can be queried using g22znf.

The remainder of this section can be skipped if you wish to use the default values for all optional parameters.

The following is a list of the optional parameters available. A full description of each optional parameter is provided in Section 11.1.

Number of Observations
Number of Variables
Storage Order

11.1

Description of the Optional Parameters

For each option, we give a summary line, a description of the optional parameter and details of constraints.

The summary line contains:

a parameter value, where the letters $a$ , $i$ and $r$ denote options that take character, integer and real values respectively;
the default value.

Keywords and character values are case and white space insensitive.

Number of Observations

i

Read Only

If queried, this optional parameter will return

n

, the number of observations in the data matrix.

Number of Variables

i

Read Only

If queried, this optional parameter will return

m_{d}

, the number of variables in the data matrix.

Storage Order

a

Default

= OBSVAR

This optional parameter states how the data matrix,

D

, will be stored in its input array.

Storage Order = OBSVAR

D_{i j}

, the value for the

j

th variable of the

i

th observation of the data matrix is stored in

dat (i, j)

Storage Order = VAROBS

D_{i j}

, the value for the

j

th variable of the

i

th observation of the data matrix is stored in

dat (j, i)

Where dat is the input parameter of the same name in g22ycf.

Constraint:

Storage Order = OBSVAR

VAROBS

g22ybf (PDF version)

G22 (blgm) Chapter Contents

G22 (blgm) Chapter Introduction

NAG Library Manual

NAG Library Routine Document

g22ybf (lm_describe_data)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

11 Optional Parameters

11.1 Description of the Optional Parameters

1

Purpose

2

Specification