e04uf {NAGFWrappers} | R Documentation |
e04uf is designed to minimize an arbitrary smooth function subject to constraints (which may include simple bounds on the variables, linear constraints and smooth nonlinear constraints) using a sequential quadratic programming (SQP) method. As many first derivatives as possible should be supplied by you; any unspecified derivatives are approximated by finite differences. It is not intended for large sparse problems.
e04uf may also be used for unconstrained, bound-constrained and linearly constrained optimization.
e04uf uses reverse communication for evaluating the objective function, the nonlinear constraint functions and any of their derivatives.
e04uf(irevcm, nclin, a, bl, bu, iter, istate, c, cjac, clamda, objf, objgrd, r, x, iwork, work, cwsav, lwsav, iwsav, rwsav, optlist, n = nrow(objgrd), ncnln = nrow(c))
irevcm |
integer Must be set to 0. must remain unchanged, unless you wish to terminate the solution to the current problem. In this case irevcm may be set to a negative value and then e04uf will take a final exit with ifail set to this value of irevcm. |
nclin |
integer n_L, the number of general linear constraints. |
a |
double array The ith row of the array a must contain the ith row of the matrix A_L of general linear constraints in eqn1. That is, the ith row contains the coefficients of the ith general linear constraint for i=1 . . . nclin. |
bl |
double array |
bu |
double array Bl must contain the lower bounds and bu the upper bounds, for all the constraints in the following order. The first n elements of each array must contain the bounds on the variables, the next n_L elements the bounds for the general linear constraints (if any) and the next n_N elements the bounds for the general nonlinear constraints (if any). To specify a nonexistent lower bound (i.e., l_j = - infinity), set bl[j] <= - bigbnd, and to specify a nonexistent upper bound (i.e., u_j = + infinity), set bu[j] >= bigbnd; the default value of bigbnd is 10^20, but this may be changed by the optional argument infiniteboundsize. To specify the jth constraint as an equality, set bl[j] = bu[j] = β, say, where abs(β) < bigbnd. |
iter |
integer Must remain unchanged from a previous call to e04uf. |
istate |
integer array Need not be set if the (default) optional argument coldstart is used. |
c |
double array Need not be set. If irevcm=4, 6 and needc[i] > 0, c[i] must contain the value of the ith constraint at x. The remaining elements of c, corresponding to the non-positive elements of needc, are ignored. |
cjac |
double array In general, cjac need not be initialized before the call to e04uf. However, if the optional argument derivativelevel=2, 3, you may optionally set the constant elements of cjac. Such constant elements need not be re-assigned on subsequent intermediate exits. If irevcm=5, 6 and needc[i] > 0, the ith row of cjac must contain the available elements of the vector \nablac_i given by \nablac_i = (( \partial c_i)/( \partial x_1) , ( \partial c_i)/( \partial x_2) , . . . , ( \partial c_i)/( \partial x_n))^T, where ( \partial c_i)/( \partial x_j) is the partial derivative of the ith constraint with respect to the jth variable, evaluated at the point x. The remaining rows of cjac, corresponding to non-positive elements of needc, are ignored. |
clamda |
double array Need not be set if the (default) optional argument coldstart is used. |
objf |
double Need not be set. If irevcm=1, 3, objf must be set to the value of the objective function at x. |
objgrd |
double array Need not be set. If irevcm=2, 3, objgrd must contain the available elements of the gradient evaluated at x. |
r |
double array Need not be initialized if the (default) optional argument coldstart is used. |
x |
double array An initial estimate of the solution. |
iwork |
integer array |
work |
double array |
cwsav |
string array |
string array
lwsav |
boolean array | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
iwsav |
integer array | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
rwsav |
double array The arrays lwsav, iwsav, rwsav and cwsav must not be altered between calls to any of the functions e04wb, e04uf, e04ud e04ue. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
optlist |
options list Optional parameters may be listed, as shown in the following table:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
n |
integer: default = nrow(objgrd) n, the number of variables. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ncnln |
integer: default = nrow(c) n_N, the number of nonlinear constraints. |
R interface to the NAG Fortran routine E04UFF.
IREVCM |
integer Specifies what values the calling program must assign to arguments of e04uf before re-entering the function. irevcm = 1: Set objf to the value of the objective function F(x). irevcm = 2: Set objgrd[<j] to the value ( \partial F)/( \partial x_j) if available for j=1 . . . n. irevcm = 3: Set objf and objgrd[j] as for irevcm = 1 and irevcm = 2. irevcm = 4: Set c[i] to the value of the constraint function c_i(x), for each i such that needc[i] > 0. irevcm = 5: Set cjac[i, j] to the value ( \partial c_i)/( \partial x_j) if available, for each i such that needc[i] > 0 and j = 1 , 2 , . . . , n. irevcm = 6: Set c[i] and cjac[i, j] as for irevcm = 4 and irevcm = 5. irevcm = 0. |
ITER |
integer The number of major iterations performed. |
ISTATE |
integer array The status of the constraints in the QP working set at the point returned in x. The significance of each possible value of istate[j] is as follows: |
C |
double array If ncnln > 0, c[i] contains the value of the ith nonlinear constraint function c_i at the final iterate for i=1 . . . ncnln. |
CJAC |
double array If ncnln > 0, cjac contains the Jacobian matrix of the nonlinear constraint functions at the final iterate, i.e., cjac[i, j] contains the partial derivative of the ith constraint function with respect to the jth variable for j=1 . . . n for i=1 . . . ncnln. |
CLAMDA |
double array The values of the QP multipliers from the last QP subproblem. clamda[j] should be non-negative if istate[j] = 1 and non-positive if istate[j] = 2. |
OBJF |
double The value of the objective function at the final iterate. |
OBJGRD |
double array The gradient of the objective function at the final iterate (or its finite difference approximation). |
R |
double array If hessian=NO, r contains the upper triangular Cholesky factor R of Q^TtildeHQ, an estimate of the transformed and reordered Hessian of the Lagrangian at x (see eqn6 in the optional parameter description in the Fortran Library documentation). |
X |
double array The point x at which the objective function, constraint functions or their derivatives are to be evaluated. The final estimate of the solution. |
NEEDC |
integer array If irevcm >= 4, needc specifies the indices of the elements of c and/or cjac that must be assigned. If needc[i] > 0, then the ith element of c and/or the available elements of the ith row of cjac must be evaluated at x. |
IWORK |
integer array |
WORK |
double array The amounts of workspace provided and required may be (by default for e04uf) output on the current advisory message unit (as defined by x04ab). As an alternative to computing liwork and lwork from the formulae given above, you may prefer to obtain appropriate values from the output of a preliminary run with liwork and lwork set to 1. (e04uf will then terminate with ifail =9.) |
CWSAV |
string array The arrays lwsav, iwsav, rwsav and cwsav must not be altered between calls to any of the functions e04wb, e04uf, e04ud e04ue. |
string array
The arrays lwsav, iwsav, rwsav and cwsav must not be altered between calls to any of the functions e04wb, e04uf, e04ud e04ue.
LWSAV |
boolean array The arrays lwsav, iwsav, rwsav and cwsav must not be altered between calls to any of the functions e04wb, e04uf, e04ud e04ue. |
IWSAV |
integer array The arrays lwsav, iwsav, rwsav and cwsav must not be altered between calls to any of the functions e04wb, e04uf, e04ud e04ue. |
RWSAV |
double array The arrays lwsav, iwsav, rwsav and cwsav must not be altered between calls to any of the functions e04wb, e04uf, e04ud e04ue. |
IFAIL |
integer ifail =0unless the function detects an error or a warning has been flagged (see the Errors section in Fortran library documentation). |
NAG
http://www.nag.co.uk/numeric/FL/nagdoc_fl23/pdf/E04/e04uff.pdf
optlist <- list() ifail <- 0 iwork <- as.matrix(mat.or.vec(0, 0)) work <- as.matrix(mat.or.vec(0, 0)) cwsav <- as.matrix(mat.or.vec(0, 0)) lwsav <- as.matrix(mat.or.vec(0, 0)) iwsav <- as.matrix(mat.or.vec(0, 0)) rwsav <- as.matrix(mat.or.vec(0, 0)) irevcm <- 0 nclin <- 1 a <- matrix(c(1, 1, 1, 1), nrow = 1, ncol = 4, byrow = TRUE) bl <- matrix(c(1, 1, 1, 1, -1e+25, -1e+25, 25), nrow = 7, ncol = 1, byrow = TRUE) bu <- matrix(c(5, 5, 5, 5, 20, 40, 1e+25), nrow = 7, ncol = 1, byrow = TRUE) iter <- 0 istate <- as.matrix(mat.or.vec(7, 1)) c <- matrix(c(0, 0), nrow = 2, ncol = 1, byrow = TRUE) cjac <- matrix(c(0, 0, 0, 0, 0, 0, 0, 0), nrow = 2, ncol = 4, byrow = TRUE) clamda <- as.matrix(mat.or.vec(7, 1)) objf <- 0 objgrd <- as.matrix(mat.or.vec(4, 1)) r <- as.matrix(mat.or.vec(4, 4)) x <- matrix(c(1, 5, 5, 1), nrow = 4, ncol = 1, byrow = TRUE) iwork <- as.matrix(mat.or.vec(17, 1)) work <- as.matrix(mat.or.vec(192, 1)) if (ifail == 0) { ans <- e04uf(irevcm, nclin, a, bl, bu, iter, istate, c, cjac, clamda, objf, objgrd, r, x, iwork, work, cwsav, lwsav, iwsav, rwsav, optlist) irevcm <- ans$IREVCM iter <- ans$ITER istate <- ans$ISTATE c <- ans$C cjac <- ans$CJAC clamda <- ans$CLAMDA objf <- ans$OBJF objgrd <- ans$OBJGRD r <- ans$R x <- ans$X needc <- ans$NEEDC iwork <- ans$IWORK work <- ans$WORK cwsav <- ans$CWSAV lwsav <- ans$LWSAV iwsav <- ans$IWSAV rwsav <- ans$RWSAV ifail <- ans$IFAIL while (irevcm > 0) { if (irevcm == 1 || irevcm == 3) { objf <- x[1] %*% x[4] %*% (x[1] + x[2] + x[3]) + x[3] } if (irevcm == 2 || irevcm == 3) { objgrd[1] <- x[4] %*% (2 %*% x[1] + x[2] + x[3]) objgrd[2] <- x[1] %*% x[4] objgrd[3] <- x[1] %*% x[4] + 1 objgrd[4] <- x[1] %*% (x[1] + x[2] + x[3]) } if (irevcm == 4 || irevcm == 6) { if (needc[1] > 0) { c[1] <- x[1]^2 + x[2]^2 + x[3]^2 + x[4]^2 } if (needc[2] > 0) { c[2] <- x[1] %*% x[2] %*% x[3] %*% x[4] } } if (irevcm == 5 || irevcm == 6) { if (needc[1] > 0) { cjac[1, 1] <- 2 %*% x[1] cjac[1, 2] <- 2 %*% x[2] cjac[1, 3] <- 2 %*% x[3] cjac[1, 4] <- 2 %*% x[4] } if (needc[2] > 0) { cjac[2, 1] <- x[2] %*% x[3] %*% x[4] cjac[2, 2] <- x[1] %*% x[3] %*% x[4] cjac[2, 3] <- x[1] %*% x[2] %*% x[4] cjac[2, 4] <- x[1] %*% x[2] %*% x[3] } } ans <- e04uf(irevcm, nclin, a, bl, bu, iter, istate, c, cjac, clamda, objf, objgrd, r, x, iwork, work, cwsav, lwsav, iwsav, rwsav, optlist) irevcm <- ans$IREVCM iter <- ans$ITER istate <- ans$ISTATE c <- ans$C cjac <- ans$CJAC clamda <- ans$CLAMDA objf <- ans$OBJF objgrd <- ans$OBJGRD r <- ans$R x <- ans$X needc <- ans$NEEDC iwork <- ans$IWORK work <- ans$WORK cwsav <- ans$CWSAV lwsav <- ans$LWSAV iwsav <- ans$IWSAV rwsav <- ans$RWSAV ifail <- ans$IFAIL } if (ifail == 0) { writeLines(toString(cat(sprintf("\n Varbl Istate Value Lagr Mult\n", "\n")))) for (i in c(1:4)) { istate <- ans$ISTATE x <- ans$X clamda <- ans$CLAMDA writeLines(toString(cat(sprintf(" V %3d %3d %14.4f %12.4f \n", i, istate[i], x[i], clamda[i], "\n")))) } ax <- a %*% x writeLines(toString(cat(sprintf("\n L Con Istate Value Lagr Mult\n", "\n")))) for (i in c(5:(4 + nclin))) { j <- i - 4 istate <- ans$ISTATE clamda <- ans$CLAMDA writeLines(toString(cat(sprintf(" L %3d %3d %14.4f %12.4f\n", j, istate[i], ax[j], clamda[i], "\n")))) } writeLines(toString(cat(sprintf("\n L Con Istate Value Lagr Mult\n", "\n")))) for (i in c((5 + nclin):(6 + nclin))) { j <- i - 4 - nclin istate <- ans$ISTATE c <- ans$C clamda <- ans$CLAMDA writeLines(toString(cat(sprintf(" N %3d %3d %14.4f%12.4f\n", j, istate[i], c[j], clamda[i], "\n")))) } objf <- ans$OBJF writeLines(toString(cat(sprintf("\n Final objective value = %15.7f\n", objf, "\n")))) } }