Integer, Intent (In)	::	n, lda, il, iu, ldz, lwork, liwork
Integer, Intent (Inout)	::	isuppz(*)
Integer, Intent (Out)	::	m, iwork(max(1,liwork)), info
Real (Kind=nag_wp), Intent (In)	::	vl, vu, abstol
Real (Kind=nag_wp), Intent (Inout)	::	a(lda,), w(), z(ldz,*)
Real (Kind=nag_wp), Intent (Out)	::	work(max(1,lwork))
Character (1), Intent (In)	::	jobz, range, uplo

C Header Interface

#include nagmk26.h

void

f08fdf_ ( const char *jobz, const char *range, const char *uplo, const Integer *n, double a[], const Integer *lda, const double *vl, const double *vu, const Integer *il, const Integer *iu, const double *abstol, Integer *m, double w[], double z[], const Integer *ldz, Integer isuppz[], double work[], const Integer *lwork, Integer iwork[], const Integer *liwork, Integer *info, const Charlen length_jobz, const Charlen length_range, const Charlen length_uplo)

The routine may be called by its LAPACK name dsyevr.

3

Description

The symmetric matrix is first reduced to a tridiagonal matrix

T

, using orthogonal similarity transformations. Then whenever possible, f08fdf (dsyevr) computes the eigenspectrum using Relatively Robust Representations. f08fdf (dsyevr) computes eigenvalues by the dqds algorithm, while orthogonal eigenvectors are computed from various ‘good’

L D L^{T}

representations (also known as Relatively Robust Representations). Gram–Schmidt orthogonalization is avoided as far as possible. More specifically, the various steps of the algorithm are as follows. For the

i

th unreduced block of

T

(a)	compute $T - σ_{i} I = L_{i} D_{i} L_{i}^{T}$ , such that $L_{i} D_{i} L_{i}^{T}$ is a relatively robust representation,
(b)	compute the eigenvalues, $λ_{j}$ , of $L_{i} D_{i} L_{i}^{T}$ to high relative accuracy by the dqds algorithm,
(c)	if there is a cluster of close eigenvalues, ‘choose’ $σ_{i}$ close to the cluster, and go to (a),
(d)	given the approximate eigenvalue $λ_{j}$ of $L_{i} D_{i} L_{i}^{T}$ , compute the corresponding eigenvector by forming a rank-revealing twisted factorization.

The desired accuracy of the output can be specified by the argument abstol. For more details, see Dhillon (1997) and Parlett and Dhillon (2000).

4

References

Anderson E, Bai Z, Bischof C, Blackford S, Demmel J, Dongarra J J, Du Croz J J, Greenbaum A, Hammarling S, McKenney A and Sorensen D (1999) LAPACK Users' Guide (3rd Edition) SIAM, Philadelphia http://www.netlib.org/lapack/lug

Barlow J and Demmel J W (1990) Computing accurate eigensystems of scaled diagonally dominant matrices SIAM J. Numer. Anal. 27 762–791

Demmel J W and Kahan W (1990) Accurate singular values of bidiagonal matrices SIAM J. Sci. Statist. Comput. 11 873–912

Dhillon I (1997) A new

O (n^{2})

algorithm for the symmetric tridiagonal eigenvalue/eigenvector problem Computer Science Division Technical Report No. UCB//CSD-97-971 UC Berkeley

Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

Parlett B N and Dhillon I S (2000) Relatively robust representations of symmetric tridiagonals Linear Algebra Appl. 309 121–151

5

Arguments

1: $jobz$ – Character(1)Input

On entry: indicates whether eigenvectors are computed.

$jobz ='N'$: Only eigenvalues are computed.
$jobz ='V'$: Eigenvalues and eigenvectors are computed.

Constraint:

jobz ='N'

'V'

2: $range$ – Character(1)Input

On entry: if

range ='A'

, all eigenvalues will be found.

range ='V'

, all eigenvalues in the half-open interval

(vl, vu]

will be found.

range ='I'

, the ilth to iuth eigenvalues will be found.

For

range ='V'

'I'

and

iu - il < n - 1

, f08jjf (dstebz) and f08jkf (dstein) are called.

Constraint:

range ='A'

'V'

'I'

3: $uplo$ – Character(1)Input

On entry: if

uplo ='U'

, the upper triangular part of

A

is stored.

uplo ='L'

, the lower triangular part of

A

is stored.

Constraint:

uplo ='U'

'L'

4: $n$ – IntegerInput

On entry:

n

, the order of the matrix

A

Constraint:

n \geq 0

5: $a (lda *)$ – Real (Kind=nag_wp) arrayInput/Output

Note: the second dimension of the array a must be at least

\max (1, n)

On entry: the

n

n

symmetric matrix

A

If $uplo ='U'$ , the upper triangular part of $A$ must be stored and the elements of the array below the diagonal are not referenced.
If $uplo ='L'$ , the lower triangular part of $A$ must be stored and the elements of the array above the diagonal are not referenced.

On exit: the lower triangle (if

uplo ='L'

) or the upper triangle (if

uplo ='U'

) of a, including the diagonal, is overwritten.

6: $lda$ – IntegerInput

On entry: the first dimension of the array a as declared in the (sub)program from which f08fdf (dsyevr) is called.

Constraint:

lda \geq \max (1, n)

7: $vl$ – Real (Kind=nag_wp)Input

8: $vu$ – Real (Kind=nag_wp)Input

On entry: if

range ='V'

, the lower and upper bounds of the interval to be searched for eigenvalues.

range ='A'

'I'

, vl and vu are not referenced.

Constraint: if

range ='V'

vl < vu

9: $il$ – IntegerInput

10: $iu$ – IntegerInput

On entry: if

range ='I'

, the indices (in ascending order) of the smallest and largest eigenvalues to be returned.

range ='A'

'V'

, il and iu are not referenced.

Constraints:

if $range ='I'$ and $n = 0$ , $il = 1$ and $iu = 0$ ;
if $range ='I'$ and $n > 0$ , $1 \leq il \leq iu \leq n$ .

11: $abstol$ – Real (Kind=nag_wp)Input

On entry: the absolute error tolerance for the eigenvalues. An approximate eigenvalue is accepted as converged when it is determined to lie in an interval

[a, b]

of width less than or equal to

abstol + ε \max (|a|, |b|),

where

ε

is the machine precision. If abstol is less than or equal to zero, then

ε {‖T‖}_{1}

will be used in its place, where

T

is the tridiagonal matrix obtained by reducing

A

to tridiagonal form. See Demmel and Kahan (1990).

If high relative accuracy is important, set abstol to

x02amf ()

, although doing so does not currently guarantee that eigenvalues are computed to high relative accuracy. See Barlow and Demmel (1990) for a discussion of which matrices can define their eigenvalues to high relative accuracy.

12: $m$ – IntegerOutput

On exit: the total number of eigenvalues found.

0 \leq m \leq n

range ='A'

m = n

range ='I'

m = iu - il + 1

13: $w (*)$ – Real (Kind=nag_wp) arrayOutput

Note: the dimension of the array w must be at least

\max (1, n)

On exit: the first m elements contain the selected eigenvalues in ascending order.

14: $z (ldz *)$ – Real (Kind=nag_wp) arrayOutput

Note: the second dimension of the array z must be at least

\max (1, m)

jobz ='V'

, and at least

1

otherwise.

On exit: if

jobz ='V'

, the first m columns of

Z

contain the orthonormal eigenvectors of the matrix

A

corresponding to the selected eigenvalues, with the

i

th column of

Z

holding the eigenvector associated with

w (i)

jobz ='N'

, z is not referenced.

Note: you must ensure that at least

\max (1, m)

columns are supplied in the array z; if

range ='V'

, the exact value of m is not known in advance and an upper bound of at least n must be used.

15: $ldz$ – IntegerInput

On entry: the first dimension of the array z as declared in the (sub)program from which f08fdf (dsyevr) is called.

Constraints:

if $jobz ='V'$ , $ldz \geq \max (1, n)$ ;
otherwise $ldz \geq 1$ .

16: $isuppz (*)$ – Integer arrayOutput

Note: the dimension of the array isuppz must be at least

\max (1, 2 \times m)

On exit: the support of the eigenvectors in z, i.e., the indices indicating the nonzero elements in z. The

i

th eigenvector is nonzero only in elements

isuppz (2 \times i - 1)

through

isuppz (2 \times i)

. Implemented only for

range ='A'

'I'

and

iu - il = n - 1

17: $work (\max (1, lwork))$ – Real (Kind=nag_wp) arrayWorkspace

On exit: if

info = 0

work (1)

contains the minimum value of lwork required for optimal performance.

18: $lwork$ – IntegerInput

On entry: the dimension of the array work as declared in the (sub)program from which f08fdf (dsyevr) is called.

lwork = - 1

, a workspace query is assumed; the routine only calculates the optimal size of the work array and the minimum size of the iwork array, returns these values as the first entries of the work and iwork arrays, and no error message related to lwork or liwork is issued.

Suggested value: for optimal performance,

lwork \geq (nb + 6) \times n

, where

nb

is the largest optimal block size for f08fef (dsytrd) and f08fgf (dormtr).

Constraint:

lwork \geq \max (1, 26 \times n)

19: $iwork (\max (1, liwork))$ – Integer arrayWorkspace

On exit: if

info = 0

iwork (1)

returns the minimum liwork.

20: $liwork$ – IntegerInput

On entry: the dimension of the array iwork as declared in the (sub)program from which f08fdf (dsyevr) is called.

liwork = - 1

Constraint:

liwork \geq \max (1, 10 \times n)

21: $info$ – IntegerOutput

On exit:

info = 0

unless the routine detects an error (see Section 6).

6

Error Indicators and Warnings

$info < 0$: If $info = - i$ , argument $i$ had an illegal value. An explanatory message is output, and execution of the program is terminated.

$info > 0$: f08fdf (dsyevr) failed to converge.

7

Accuracy

The computed eigenvalues and eigenvectors are exact for a nearby matrix

(A + E)

, where

{‖E‖}_{2} = O (ε) {‖A‖}_{2},

and

ε

is the machine precision. See Section 4.7 of Anderson et al. (1999) for further details.

8

Parallelism and Performance

f08fdf (dsyevr) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.

f08fdf (dsyevr) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9

Further Comments

The total number of floating-point operations is proportional to

n^{3}

The complex analogue of this routine is f08frf (zheevr).

10

Example

This example finds the eigenvalues with indices in the range

[2, 3]

, and the corresponding eigenvectors, of the symmetric matrix

A = (\begin{matrix} 1 & 2 & 3 & 4 \\ 2 & 2 & 3 & 4 \\ 3 & 3 & 3 & 4 \\ 4 & 4 & 4 & 4 \end{matrix}) .

Information on required and provided workspace is also output.

NAG Library Routine Document

f08fdf (dsyevr)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

1

Purpose

2

Specification

3

Description

4

References

5

Arguments

6

Error Indicators and Warnings

7

Accuracy

8

Parallelism and Performance

9

Further Comments

10

Example

10.1

Program Text

10.2

Program Data

10.3

Program Results