NAG Library Routine Document

f08psf (zhseqr) computes all the eigenvalues and, optionally, the Schur factorization of a complex Hessenberg matrix or a complex general matrix which has been reduced to Hessenberg form.

2

Specification

Fortran Interface

Subroutine f08psf (

job, compz, n, ilo, ihi, h, ldh, w, z, ldz, work, lwork, info)

Integer, Intent (In)	::	n, ilo, ihi, ldh, ldz, lwork
Integer, Intent (Out)	::	info
Complex (Kind=nag_wp), Intent (Inout)	::	h(ldh,), w(), z(ldz,*)
Complex (Kind=nag_wp), Intent (Out)	::	work(max(1,lwork))
Character (1), Intent (In)	::	job, compz

C Header Interface

#include <nagmk26.h>

void	f08psf_ (const char job, const char compz, const Integer n, const Integer ilo, const Integer ihi, Complex h[], const Integer ldh, Complex w[], Complex z[], const Integer ldz, Complex work[], const Integer lwork, Integer *info, const Charlen length_job, const Charlen length_compz)

The routine may be called by its LAPACK name zhseqr.

3

Description

f08psf (zhseqr) computes all the eigenvalues and, optionally, the Schur factorization of a complex upper Hessenberg matrix

H

H = Z T Z^{H},

where

T

is an upper triangular matrix (the Schur form of

H

), and

Z

is the unitary matrix whose columns are the Schur vectors

z_{i}

. The diagonal elements of

T

are the eigenvalues of

H

The routine may also be used to compute the Schur factorization of a complex general matrix

A

which has been reduced to upper Hessenberg form

H

\begin{array}{l} A & = & Q H Q^{H}, where ​ Q ​ is unitary, \\ = & (Q Z) T {(Q Z)}^{H} . \end{array}

In this case, after f08nsf (zgehrd) has been called to reduce

A

to Hessenberg form, f08ntf (zunghr) must be called to form

Q

explicitly;

Q

is then passed to f08psf (zhseqr), which must be called with

compz ='V'

The routine can also take advantage of a previous call to f08nvf (zgebal) which may have balanced the original matrix before reducing it to Hessenberg form, so that the Hessenberg matrix

H

has the structure:

(\begin{matrix} H_{11} & H_{12} & H_{13} \\ H_{22} & H_{23} \\ H_{33} \end{matrix})

where

H_{11}

and

H_{33}

are upper triangular. If so, only the central diagonal block

H_{22}

(in rows and columns

i_{lo}

i_{hi}

) needs to be further reduced to Schur form (the blocks

H_{12}

and

H_{23}

are also affected). Therefore the values of

i_{lo}

and

i_{hi}

can be supplied to f08psf (zhseqr) directly. Also, f08nwf (zgebak) must be called after this routine to permute the Schur vectors of the balanced matrix to those of the original matrix. If f08nvf (zgebal) has not been called however, then

i_{lo}

must be set to

1

and

i_{hi}

n

. Note that if the Schur factorization of

A

is required, f08nvf (zgebal) must not be called with

job ='S'

'B'

, because the balancing transformation is not unitary.

f08psf (zhseqr) uses a multishift form of the upper Hessenberg

Q R

algorithm, due to Bai and Demmel (1989). The Schur vectors are normalized so that

{‖z_{i}‖}_{2} = 1

, but are determined only to within a complex factor of absolute value

1

4

References

Bai Z and Demmel J W (1989) On a block implementation of Hessenberg multishift

Q R

iteration Internat. J. High Speed Comput. 1 97–112

Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

5

Arguments

1: $job$ – Character(1)Input

On entry: indicates whether eigenvalues only or the Schur form

T

is required.

$job ='E'$: Eigenvalues only are required.
$job ='S'$: The Schur form $T$ is required.

Constraint:

job ='E'

'S'

2: $compz$ – Character(1)Input

On entry: indicates whether the Schur vectors are to be computed.

$compz ='N'$: No Schur vectors are computed (and the array z is not referenced).
$compz ='V'$: The Schur vectors of $A$ are computed (and the array z must contain the matrix $Q$ on entry).
$compz ='I'$: The Schur vectors of $H$ are computed (and the array z is initialized by the routine).

Constraint:

compz ='N'

'V'

'I'

3: $n$ – IntegerInput

On entry:

n

, the order of the matrix

H

Constraint:

n \geq 0

4: $ilo$ – IntegerInput

5: $ihi$ – IntegerInput

On entry: if the matrix

A

has been balanced by f08nvf (zgebal), ilo and ihi must contain the values returned by that routine. Otherwise, ilo must be set to

1

and ihi to n.

Constraint:

ilo \geq 1

and

\min (ilo, n) \leq ihi \leq n

6: $h (ldh *)$ – Complex (Kind=nag_wp) arrayInput/Output

Note: the second dimension of the array h must be at least

\max (1, n)

On entry: the

n

n

upper Hessenberg matrix

H

, as returned by f08nsf (zgehrd).

On exit: if

job ='E'

, the array contains no useful information.

job ='S'

, h is overwritten by the upper triangular matrix

T

from the Schur decomposition (the Schur form) unless

info > 0

7: $ldh$ – IntegerInput

On entry: the first dimension of the array h as declared in the (sub)program from which f08psf (zhseqr) is called.

Constraint:

ldh \geq \max (1, n)

8: $w (*)$ – Complex (Kind=nag_wp) arrayOutput

Note: the dimension of the array w must be at least

\max (1, n)

On exit: the computed eigenvalues, unless

info > 0

(in which case see Section 6). The eigenvalues are stored in the same order as on the diagonal of the Schur form

T

(if computed).

9: $z (ldz *)$ – Complex (Kind=nag_wp) arrayInput/Output

Note: the second dimension of the array z must be at least

\max (1, n)

compz ='V'

'I'

and at least

1

compz ='N'

On entry: if

compz ='V'

, z must contain the unitary matrix

Q

from the reduction to Hessenberg form.

compz ='I'

, z need not be set.

On exit: if

compz ='V'

'I'

, z contains the unitary matrix of the required Schur vectors, unless

info > 0

compz ='N'

, z is not referenced.

10: $ldz$ – IntegerInput

On entry: the first dimension of the array z as declared in the (sub)program from which f08psf (zhseqr) is called.

Constraints:

if $compz ='V'$ or $'I'$ , $ldz \geq \max (1, n)$ ;
if $compz ='N'$ , $ldz \geq 1$ .

11: $work (\max (1, lwork))$ – Complex (Kind=nag_wp) arrayWorkspace

On exit: if

info = 0

, the real part of

work (1)

contains the minimum value of lwork required for optimal performance.

12: $lwork$ – IntegerInput

On entry: the dimension of the array work as declared in the (sub)program from which f08psf (zhseqr) is called, unless

lwork = - 1

, in which case a workspace query is assumed and the routine only calculates the minimum dimension of work.

Constraint:

lwork \geq \max (1, n)

lwork = - 1

13: $info$ – IntegerOutput

On exit:

info = 0

unless the routine detects an error (see Section 6).

6

Error Indicators and Warnings

$- 999 < info < 0$: If $info = - i$ , argument $i$ had an illegal value. An explanatory message is output, and execution of the program is terminated.

$info = - 999$: Dynamic memory allocation failed.

See Section 3.7 in How to Use the NAG Library and its Documentation for further information.
An explanatory message is output, and execution of the program is terminated.

$info > 0$: The algorithm has failed to find all the eigenvalues after a total of $30 (ihi - ilo + 1)$ iterations.

7

Accuracy

The computed Schur factorization is the exact factorization of a nearby matrix

(H + E)

, where

{‖E‖}_{2} = O (ε) {‖H‖}_{2},

and

ε

is the machine precision.

λ_{i}

is an exact eigenvalue, and

{\tilde{λ}}_{i}

is the corresponding computed value, then

|{\tilde{λ}}_{i} - λ_{i}| \leq \frac{c (n) ε {‖H‖}_{2}}{s_{i}},

where

c (n)

is a modestly increasing function of

n

, and

s_{i}

is the reciprocal condition number of

λ_{i}

. The condition numbers

s_{i}

may be computed by calling f08qyf (ztrsna).

8

Parallelism and Performance

f08psf (zhseqr) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.

f08psf (zhseqr) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9

Further Comments

The total number of real floating-point operations depends on how rapidly the algorithm converges, but is typically about:

$25 n^{3}$ if only eigenvalues are computed;
$35 n^{3}$ if the Schur form is computed;
$70 n^{3}$ if the full Schur factorization is computed.

The real analogue of this routine is f08pef (dhseqr).

10

Example

This example computes all the eigenvalues and the Schur factorization of the upper Hessenberg matrix

H

, where

H = (\begin{array}{r} - 3.9700 - 5.0400 i & - 1.1318 - 2.5693 i & - 4.6027 - 0.1426 i & - 1.4249 + 1.7330 i \\ - 5.4797 + 0.0000 i & 1.8585 - 1.5502 i & 4.4145 - 0.7638 i & - 0.4805 - 1.1976 i \\ 0.0000 + 0.0000 i & 6.2673 + 0.0000 i & - 0.4504 - 0.0290 i & - 1.3467 + 1.6579 i \\ 0.0000 + 0.0000 i & 0.0000 + 0.0000 i & - 3.5000 + 0.0000 i & 2.5619 - 3.3708 i \end{array}) .

See also Section 10 in f08ntf (zunghr), which illustrates the use of this routine to compute the Schur factorization of a general matrix.

NAG Library Routine Document

f08psf (zhseqr)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

1

Purpose

2

Specification

3

Description

4

References

5

Arguments

6

Error Indicators and Warnings

7

Accuracy

8

Parallelism and Performance

9

Further Comments

10

Example

10.1

Program Text

10.2

Program Data

10.3

Program Results