NAG Library Routine Document

D06CAF

1  Purpose

2  Specification

3  Description

4  References

5  Parameters

1:     $\mathrm{NV}$ – INTEGERInput

On entry: the total number of vertices in the input mesh.

Constraint: $\mathbf{NV}\ge 3$.

2:     $\mathrm{NELT}$ – INTEGERInput

On entry: the number of triangles in the input mesh.

Constraint: $\mathbf{NELT}\le 2\times \mathbf{NV}-1$.

3:     $\mathrm{NEDGE}$ – INTEGERInput

On entry: the number of the boundary and interface edges in the input mesh.

Constraint: $\mathbf{NEDGE}\ge 1$.

4:     $\mathrm{COOR}\left(2,\mathbf{NV}\right)$ – REAL (KIND=nag_wp) arrayInput/Output

On entry: $\mathbf{COOR}\left(1,\mathit{i}\right)$ contains the $x$ coordinate of the $\mathit{i}$th input mesh vertex, for $\mathit{i}=1,2,\dots ,\mathbf{NV}$; while $\mathbf{COOR}\left(2,\mathit{i}\right)$ contains the corresponding $y$ coordinate.

On exit: $\mathbf{COOR}\left(1,\mathit{i}\right)$ will contain the $x$ coordinate of the $\mathit{i}$th smoothed mesh vertex, for $\mathit{i}=1,2,\dots ,\mathbf{NV}$; while $\mathbf{COOR}\left(2,\mathit{i}\right)$ will contain the corresponding $y$ coordinate. Note that the coordinates of boundary and interface edge vertices, as well as those specified by you (see the description of NUMFIX), are unchanged by the process.

5:     $\mathrm{EDGE}\left(3,\mathbf{NEDGE}\right)$ – INTEGER arrayInput

On entry: the specification of the boundary or interface edges. $\mathbf{EDGE}\left(1,j\right)$ and $\mathbf{EDGE}\left(2,j\right)$ contain the vertex numbers of the two end points of the $j$th boundary edge. $\mathbf{EDGE}\left(3,j\right)$ is a user-supplied tag for the $j$th boundary or interface edge: $\mathbf{EDGE}\left(3,j\right)=0$ for an interior edge and has a nonzero tag otherwise.

Constraint: $1\le \mathbf{EDGE}\left(\mathit{i},\mathit{j}\right)\le \mathbf{NV}$ and $\mathbf{EDGE}\left(1,\mathit{j}\right)\ne \mathbf{EDGE}\left(2,\mathit{j}\right)$, for $\mathit{i}=1,2$ and $\mathit{j}=1,2,\dots ,\mathbf{NEDGE}$.

6:     $\mathrm{CONN}\left(3,\mathbf{NELT}\right)$ – INTEGER arrayInput

On entry: the connectivity of the mesh between triangles and vertices. For each triangle $\mathit{j}$, $\mathbf{CONN}\left(\mathit{i},\mathit{j}\right)$ gives the indices of its three vertices (in anticlockwise order), for $\mathit{i}=1,2,3$ and $\mathit{j}=1,2,\dots ,\mathbf{NELT}$.

Constraint: $1\le \mathbf{CONN}\left(\mathit{i},\mathit{j}\right)\le \mathbf{NV}$ and $\mathbf{CONN}\left(1,\mathit{j}\right)\ne \mathbf{CONN}\left(2,\mathit{j}\right)$ and $\mathbf{CONN}\left(1,\mathit{j}\right)\ne \mathbf{CONN}\left(3,\mathit{j}\right)$ and $\mathbf{CONN}\left(2,\mathit{j}\right)\ne \mathbf{CONN}\left(3,\mathit{j}\right)$, for $\mathit{i}=1,2,3$ and $\mathit{j}=1,2,\dots ,\mathbf{NELT}$.

7:     $\mathrm{NVFIX}$ – INTEGERInput

On entry: the number of fixed vertices in the input mesh.

Constraint: $0\le \mathbf{NVFIX}\le \mathbf{NV}$.

8:     $\mathrm{NUMFIX}\left(*\right)$ – INTEGER arrayInput

Note: the dimension of the array NUMFIX must be at least $\max \left(1,\mathbf{NVFIX}\right)$.

On entry: the indices in COOR of fixed interior vertices of the input mesh.

Constraint: if $\mathbf{NVFIX}>0$, $1\le \mathbf{NUMFIX}\left(\mathit{i}\right)\le \mathbf{NV}$, for $\mathit{i}=1,2,\dots ,\mathbf{NVFIX}$.

9:     $\mathrm{ITRACE}$ – INTEGERInput

On entry: the level of trace information required from D06CAF.

$\mathbf{ITRACE}\le 0$

No output is generated.

$\mathbf{ITRACE}=1$

A histogram of the triangular element qualities is printed on the current advisory message unit (see X04ABF) before and after smoothing. This histogram gives the lowest and the highest triangle quality as well as the number of elements lying in each of the NQINT equal intervals between the extremes.

$\mathbf{ITRACE}>1$

The output is similar to that produced when $\mathbf{ITRACE}=1$ but the connectivity between vertices and triangles (for each vertex, the list of triangles in which it appears) is given.

You are advised to set $\mathbf{ITRACE}=0$, unless you are experienced with finite element meshes.

10:   $\mathrm{NQINT}$ – INTEGERInput

On entry: the number of intervals between the extreme quality values for the input and the smoothed mesh.

If $\mathbf{ITRACE}=0$, NQINT is not referenced.

11:   $\mathrm{IWORK}\left(\mathbf{LIWORK}\right)$ – INTEGER arrayWorkspace

12:   $\mathrm{LIWORK}$ – INTEGERInput

On entry: the dimension of the array IWORK as declared in the (sub)program from which D06CAF is called.

Constraint: $\mathbf{LIWORK}\ge 8\times \mathbf{NELT}+2\times \mathbf{NV}$.

13:   $\mathrm{RWORK}\left(\mathbf{LRWORK}\right)$ – REAL (KIND=nag_wp) arrayWorkspace

14:   $\mathrm{LRWORK}$ – INTEGERInput

On entry: the dimension of the array RWORK as declared in the (sub)program from which D06CAF is called.

Constraint: $\mathbf{LRWORK}\ge 2\times \mathbf{NV}+\mathbf{NELT}$.

15:   $\mathrm{IFAIL}$ – INTEGERInput/Output

On entry: IFAIL must be set to $0$, $-1\text{ or }1$. If you are unfamiliar with this parameter you should refer to Section 3.3 in the Essential Introduction for details.

For environments where it might be inappropriate to halt program execution when an error is detected, the value $-1\text{ or }1$ is recommended. If the output of error messages is undesirable, then the value $1$ is recommended. Otherwise, if you are not familiar with this parameter, the recommended value is $0$. When the value $-\mathbf{1}\text{ or }\mathbf{1}$ is used it is essential to test the value of IFAIL on exit.

On exit: $\mathbf{IFAIL}=\mathbf{0}$ unless the routine detects an error or a warning has been flagged (see Section 6).

6  Error Indicators and Warnings

$\mathbf{IFAIL}=1$

On entry,	$\mathbf{NV}<3$,
or	$\mathbf{NELT}>2\times \mathbf{NV}-1$,
or	$\mathbf{NEDGE}<1$,
or	$\mathbf{EDGE}\left(i,j\right)<1$ or $\mathbf{EDGE}\left(i,j\right)>\mathbf{NV}$ for some $i=1,2$ and $j=1,2,\dots ,\mathbf{NEDGE}$,
or	$\mathbf{EDGE}\left(1,j\right)=\mathbf{EDGE}\left(2,j\right)$ for some $j=1,2,\dots ,\mathbf{NEDGE}$,
or	$\mathbf{CONN}\left(i,j\right)<1$ or $\mathbf{CONN}\left(i,j\right)>\mathbf{NV}$ for some $i=1,2,3$ and $j=1,2,\dots ,\mathbf{NELT}$,
or	$\mathbf{CONN}\left(1,j\right)=\mathbf{CONN}\left(2,j\right)$ or $\mathbf{CONN}\left(1,j\right)=\mathbf{CONN}\left(3,j\right)$ or $\mathbf{CONN}\left(2,j\right)=\mathbf{CONN}\left(3,j\right)$ for some $j=1,2,\dots ,\mathbf{NELT}$,
or	$\mathbf{NVFIX}<0$ or $\mathbf{NVFIX}>\mathbf{NV}$,
or	$\mathbf{NUMFIX}\left(i\right)<1$ or $\mathbf{NUMFIX}\left(i\right)>\mathbf{NV}$ for some $i=1,2,\dots ,\mathbf{NVFIX}$ if $\mathbf{NVFIX}>0$,
or	$\mathbf{LIWORK}<8\times \mathbf{NELT}+2\times \mathbf{NV}$,
or	$\mathbf{LRWORK}<2\times \mathbf{NV}+\mathbf{NELT}$.

$\mathbf{IFAIL}=2$

A serious error has occurred in an internal call to an auxiliary routine. Check the input mesh, especially the connectivity between triangles and vertices (the parameter CONN). Setting $\mathbf{ITRACE}>1$ may provide more information. If the problem persists, contact NAG.

$\mathbf{IFAIL}=-99$

An unexpected error has been triggered by this routine. Please contact NAG.

See Section 3.8 in the Essential Introduction for further information.

$\mathbf{IFAIL}=-399$

Your licence key may have expired or may not have been installed correctly.

See Section 3.7 in the Essential Introduction for further information.

$\mathbf{IFAIL}=-999$

Dynamic memory allocation failed.

See Section 3.6 in the Essential Introduction for further information.

7  Accuracy

8  Parallelism and Performance

9  Further Comments

10  Example

10.1  Program Text

Program Text (d06cafe.f90)

10.2  Program Data

Program Data (d06cafe.d)

10.3  Program Results

Program Results (d06cafe.r)