NAG Library Function Document

nag_tsa_multi_inp_update (g13bgc)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

▸▿ 10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

1 Purpose

nag_tsa_multi_inp_update (g13bgc) accepts a series of new observations of an output time series and any associated input time series, for which a multi-input model is already fully specified, and updates the ‘state set’ information for use in constructing further forecasts.

The previous specification of the multi-input model will normally have been obtained by using nag_tsa_multi_inp_model_estim (g13bec) to estimate the relevant transfer function and ARIMA parameters. The supplied state set will originally have been produced by nag_tsa_multi_inp_model_estim (g13bec) (or possibly nag_tsa_multi_inp_model_forecast (g13bjc)), but may since have been updated by nag_tsa_multi_inp_update (g13bgc).

2 Specification

#include <nag.h>

#include <nagg13.h>

void	nag_tsa_multi_inp_update (Nag_ArimaOrder arimav, Integer nser, Nag_TransfOrder transfv, const double para[], Integer npara, Integer nnv, double xxyn[], Integer tdxxyn, Integer kzef, Nag_G13_Opt options, NagError fail)

3 Description

The multi-input model is specified in Section 3 in nag_tsa_multi_inp_model_estim (g13bec). The form of these equations required to update the state set is as follows:

z_{t} = δ_{1} z_{t - 1} + δ_{2} z_{t - 2} + \dots + δ_{p} z_{t - p} + ω_{0} x_{t - b} - ω_{1} x_{t - b - 1} - \dots - ω_{q} x_{t - b - q}

the transfer models which generate input component values

z_{i, t}

from one or more inputs

x_{i, t}

n_{t} = y_{t} - z_{1, t} - z_{2, t} - \dots - z_{m, t}

which generates the output noise component from the output

y_{t}

and the input components, and

\begin{array}{l} w_{t} & = \nabla^{d} \nabla_{s}^{D} n_{t} - c \\ e_{t} & = w_{t} - Φ_{1} w_{t - s} - Φ_{2} w_{t - 2 \times s} - \dots - Φ_{P} w_{t - P \times s} + Θ_{1} e_{t - s} + Θ_{2} e_{t - 2 \times s} + \dots + Θ_{Q} e_{t - Q \times s} \\ a_{t} & = e_{t} - ϕ_{1} e_{t - 1} - ϕ_{2} e_{t - 2} - \dots - ϕ_{p} e_{t - p} + θ_{1} a_{t - 1} + θ_{2} a_{t - 2} + \dots + θ_{q} a_{t - q} \end{array}

the ARIMA model for the output noise which generates the residuals

a_{t}

The state set (as also given in Section 3 in nag_tsa_multi_inp_model_estim (g13bec)) is the collection of terms

z_{n + 1 - k}, x_{n + 1 - k}, n_{n + 1 - k}, w_{n + 1 - k}, e_{n + 1 - k} and a_{n + 1 - k}

for

k = 1

up to the maximum lag associated with each of these series respectively, in the above model equations.

n

is the latest time point of the series from which the state set has been generated.

The function accepts further values of the series

y_{t}

x_{1, t}, x_{2, t}, \dots, x_{m, t}

, for

t = n + 1, \dots, n + l

, and applies the above model equations over this time range, to generate new values of the various model components, noise series and residuals. The state set is reconstructed, corresponding to the latest time point

n + l

, the earlier values being discarded.

The set of residuals corresponding to the new observations may be of use in checking that the new observations conform to the previously fitted model. The components of the new observations of the output series which are due to the various inputs, and the noise component, are also optionally returned.

The parameters of the model are not changed in this function.

4 References

Box G E P and Jenkins G M (1976) Time Series Analysis: Forecasting and Control (Revised Edition) Holden–Day

5 Arguments

1: $arimav$ – Nag_ArimaOrder *

Pointer to structure of type Nag_ArimaOrder with the following members:

p – Integer
d – IntegerInput
q – IntegerInput
bigp – IntegerInput
bigd – IntegerInput
bigq – IntegerInput
s – IntegerInput: On entry: these seven members of arimav must specify the orders vector $(p, d, q, P, D, Q, s)$ , respectively, of the ARIMA model for the output noise component.
$p$ , $q$ , $P$ and $Q$ refer, respectively, to the number of autoregressive ( $ϕ$ ), moving average ( $θ$ ), seasonal autoregressive ( $Φ$ ) and seasonal moving average ( $Θ$ ) parameters.

$d$ , $D$ and $s$ refer, respectively, to the order of non-seasonal differencing, the order of seasonal differencing and the seasonal period.

2: $nser$ – IntegerInput

On entry: the total number of input and output series. There may be any number of input series (including none), but only one output series.

3: $transfv$ – Nag_TransfOrder *

Pointer to structure of type Nag_TransfOrder with the following members:

b – Integer *Input
q – Integer *Input
p – Integer *
r – Integer *Input: On entry: before use, these member pointers must be allocated memory by calling nag_tsa_transf_orders (g13byc) which allocates $nseries - 1$ elements to each pointer. The memory allocated to these pointers must be given the transfer function model orders $b$ , $q$ and $p$ of each of the input series. The order arguments for input series $i$ are held in the $i$ th element of the allocated memory for each pointer. $b [i - 1]$ holds the value $b_{i}$ , $transfv \to q [i - 1]$ holds the value $q_{i}$ and $transfv \to p [i - 1]$ holds the value $p_{i}$ .
For a simple input, $b_{i} = q_{i} = p_{i} = 0$ .

$r [i - 1]$ holds the value $r_{i}$ , where $r_{i} = 1$ for a simple input, and $r_{i} = 2 or 3$ for a transfer function input.

The choice $r_{i} = 3$ leads to estimation of the pre-period input effects as nuisance parameters, and $r_{i} = 2$ suppresses this estimation. This choice may affect the returned forecasts.

When $r_{i} = 1$ , any nonzero contents of the $i$ th element of the memory of $b$ , $transfv \to q$ and $transfv \to p$ are ignored.

Constraint: $r [i - 1] = 1$ , $2$ or $3$ , for $i = 1, 2, \dots nseries - 1$
The memory allocated to the members of transfv must be freed by a call to nag_tsa_trans_free (g13bzc).

4: $para [npara]$ – const doubleInput

On entry: estimates of the multi-input model parameters as returned by nag_tsa_multi_inp_model_estim (g13bec). These are in order, firstly the ARIMA model parameters:

p

values of

ϕ

parameters,

q

values of

θ

parameters,

P

values of

Φ

parameters and

Q

values of

Θ

parameters. These are followed by the transfer function model parameter values

ω_{0}, ω_{1}, \dots, ω_{q_{1}}

δ_{1}, δ_{2}, \dots, δ_{p_{1}}

for the first of any input series and similarly for each subsequent input series. The final component of para is the value of the constant

c

5: $npara$ – IntegerInput

On entry: the exact number of

ϕ

θ

Φ

Θ

ω

δ

and

c

parameters. (

c

must be included whether its value was previously estimated or was set fixed.)

6: $nnv$ – IntegerInput

On entry: the number of new observation sets being used to update the state set, each observation set consisting of a value of the output series and the associated values of each of the input series at a particular time point.

7: $xxyn [nnv \times tdxxyn]$ – doubleInput/Output

Note: the

(i, j)

th element of the matrix is stored in

xxyn [(i - 1) \times tdxxyn + j - 1]

On entry: the nnv new observation sets being used to update the state set. Column

i - 1

contains the values of input series

i

, for

i = 1, 2, \dots, nser - 1

. Column

nser - 1

contains the values of the output series. Consecutive rows correspond to increasing time sequence.

On exit: if

kzef = 0

, xxyn remains unchanged.

kzef \neq 0

, the columns of xxyn hold the corresponding values of the input component series

z_{t}

and the output noise component

n_{t}

in that order.

8: $tdxxyn$ – IntegerInput

On entry: the stride separating matrix column elements in the array xxyn.

Constraint:

tdxxyn \geq nser

9: $kzef$ – IntegerInput

On entry: must not be set to

0

, if the values of the input component series

z_{t}

and the values of the output noise component

n_{t}

are to overwrite the contents of xxyn on exit, and must be set to

0

if xxyn is to remain unchanged on exit.

10: $options$ – Nag_G13_Opt *Input/Output

On entry: a pointer to a structure of type Nag_G13_Opt as returned by nag_tsa_multi_inp_model_estim (g13bec) or nag_tsa_multi_inp_model_forecast (g13bjc).

On exit: the structure contains the updated state space information.

11: $fail$ – NagError *Input/Output

The NAG error argument (see Section 3.6 in the Essential Introduction).

6 Error Indicators and Warnings

NE_ALLOC_FAIL: Dynamic memory allocation failed.
See Section 3.2.1.2 in the Essential Introduction for further information.
NE_BAD_PARAM: On entry, argument $〈value〉$ had an illegal value.
NE_INT: On entry, $tdxxyn = 〈value〉$ .
Constraint: $tdxxyn > 0$ .
NE_INT_2: On entry, $tdxxyn = 〈value〉$ and $nser = 〈value〉$ .
Constraint: $tdxxyn \geq nser$ .
NE_INTERNAL_ERROR: An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.

An unexpected error has been triggered by this function. Please contact NAG.
See Section 3.6.6 in the Essential Introduction for further information.
NE_NO_LICENCE: Your licence key may have expired or may not have been installed correctly.
See Section 3.6.5 in the Essential Introduction for further information.
NE_STRUCT_CORRUPT: Values of the members of structures arimav, transfv and options are not compatible.

7 Accuracy

The computations are believed to be stable.

8 Parallelism and Performance

Not applicable.

9 Further Comments

The time taken by nag_tsa_multi_inp_update (g13bgc) is approximately proportional to

nnv \times npara

10 Example

This example uses the data described in nag_tsa_multi_inp_model_estim (g13bec) in which

40

observations of an output time series and a single input series were processed. In this example a model which included seasonal differencing of order

1

was used. The

10

values of the state set and the

5

final values of para then obtained are used as input to this program, together with the values of

4

new observations and the transfer function orders of the input series. The model used is

ϕ_{1} = 0.5158

Θ_{1} = 0.9994

ω_{0} = 8.6343

δ_{1} = 0.6726

c = - 0.3172

The following are computed and printed out: the updated state set, the residuals

a_{t}

and the values of the components

z_{t}

and the output noise component

n_{t}

corresponding to the new observations.

NAG Library Function Documentnag_tsa_multi_inp_update (g13bgc)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

NAG Library Function Document

nag_tsa_multi_inp_update (g13bgc)