NAG Library Function Document

nag_ztr_copy (f16tec)

1  Purpose

2  Specification

3  Description

4  References

5  Arguments

1:     order – Nag_OrderTypeInput

On entry: the order argument specifies the two-dimensional storage scheme being used, i.e., row-major ordering or column-major ordering. C language defined storage is specified by $\mathbf{order}=\mathrm{Nag\_RowMajor}$. See Section 3.2.1.3 in the Essential Introduction for a more detailed explanation of the use of this argument.

Constraint: $\mathbf{order}=\mathrm{Nag\_RowMajor}$ or $\mathrm{Nag\_ColMajor}$.

2:     uplo – Nag_UploTypeInput

On entry: specifies whether the upper or lower triangular part of $A$ is stored.

$\mathbf{uplo}=\mathrm{Nag\_Upper}$

The upper triangular part of $A$ is stored.

$\mathbf{uplo}=\mathrm{Nag\_Lower}$

The lower triangular part of $A$ is stored.

Constraint: $\mathbf{uplo}=\mathrm{Nag\_Upper}$ or $\mathrm{Nag\_Lower}$.

3:     trans – Nag_TransTypeInput

On entry: specifies the operation to be performed.

$\mathbf{trans}=\mathrm{Nag\_NoTrans}$

$B\leftarrow A$.

$\mathbf{trans}=\mathrm{Nag\_Trans}$

$B\leftarrow A^{\mathrm{T}}$.

$\mathbf{trans}=\mathrm{Nag\_ConjTrans}$

$B\leftarrow A^{\mathrm{H}}$.

Constraint: $\mathbf{trans}=\mathrm{Nag\_NoTrans}$, $\mathrm{Nag\_Trans}$ or $\mathrm{Nag\_ConjTrans}$.

4:     diag – Nag_DiagTypeInput

On entry: specifies whether $A$ has nonunit or unit diagonal elements.

$\mathbf{diag}=\mathrm{Nag\_NonUnitDiag}$

The diagonal elements are stored explicitly.

$\mathbf{diag}=\mathrm{Nag\_UnitDiag}$

The diagonal elements are assumed to be $1$ and are not referenced.

Constraint: $\mathbf{diag}=\mathrm{Nag\_NonUnitDiag}$ or $\mathrm{Nag\_UnitDiag}$.

5:     n – IntegerInput

On entry: $n$, the order of the matrices $A$ and $B$.

Constraint: $\mathbf{n}\ge 0$.

6:     a[$\mathit{dim}$] – const ComplexInput

Note: the dimension, dim, of the array a must be at least $\max \left(1,\mathbf{pda}\times \mathbf{n}\right)$.

On entry: the $n$ by $n$ triangular matrix $A$.

If $\mathbf{order}=\mathrm{Nag\_ColMajor}$, $A_{ij}$ is stored in $\mathbf{a}\left[\left(j-1\right)\times \mathbf{pda}+i-1\right]$.

If $\mathbf{order}=\mathrm{Nag\_RowMajor}$, $A_{ij}$ is stored in $\mathbf{a}\left[\left(i-1\right)\times \mathbf{pda}+j-1\right]$.

If $\mathbf{uplo}=\mathrm{Nag\_Upper}$, the upper triangular part of $A$ must be stored and the elements of the array below the diagonal are not referenced.

If $\mathbf{uplo}=\mathrm{Nag\_Lower}$, the lower triangular part of $A$ must be stored and the elements of the array above the diagonal are not referenced.

If $\mathbf{diag}=\mathrm{Nag\_UnitDiag}$, the diagonal elements of $A$ are assumed to be $1$, and are not referenced.

7:     pda – IntegerInput

On entry: the stride separating row or column elements (depending on the value of order) of the matrix $A$ in the array a.

Constraint: $\mathbf{pda}\ge \max \left(1,\mathbf{n}\right)$.

8:     b[$\mathit{dim}$] – ComplexOutput

Note: the dimension, dim, of the array b must be at least $\max \left(1,\mathbf{pdb}\times \mathbf{n}\right)$.

On exit: the $n$ by $n$ triangular matrix $B$.

If $\mathbf{order}=\mathrm{Nag\_ColMajor}$, $B_{ij}$ is stored in $\mathbf{b}\left[\left(j-1\right)\times \mathbf{pdb}+i-1\right]$.

If $\mathbf{order}=\mathrm{Nag\_RowMajor}$, $B_{ij}$ is stored in $\mathbf{b}\left[\left(i-1\right)\times \mathbf{pdb}+j-1\right]$.

If $\mathbf{uplo}=\mathrm{Nag\_Upper}$ and $\mathbf{trans}=\mathrm{Nag\_NoTrans}$ or if $\mathbf{uplo}=\mathrm{Nag\_Lower}$ and $\mathbf{trans}=\mathrm{Nag\_Trans}$ or $\mathbf{trans}=\mathrm{Nag\_ConjTrans}$, $B$ is upper triangular and the elements of the array below the diagonal are not set.

If $\mathbf{uplo}=\mathrm{Nag\_Lower}$ and $\mathbf{trans}=\mathrm{Nag\_NoTrans}$ or if $\mathbf{uplo}=\mathrm{Nag\_Upper}$ and $\mathbf{trans}=\mathrm{Nag\_Trans}$ or $\mathbf{trans}=\mathrm{Nag\_ConjTrans}$, $B$ is lower triangular and the elements of the array above the diagonal are not set.

9:     pdb – IntegerInput

On entry: the stride separating row or column elements (depending on the value of order) in the array b.

Constraint: $\mathbf{pdb}\ge \max \left(1,\mathbf{n}\right)$.

10:   fail – NagError *Input/Output

The NAG error argument (see Section 3.6 in the Essential Introduction).

6  Error Indicators and Warnings

NE_ALLOC_FAIL

Dynamic memory allocation failed.

NE_BAD_PARAM

On entry, argument $⟨\mathit{\text{value}}⟩$ had an illegal value.

NE_INT

On entry, $\mathbf{n}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{n}\ge 0$.

NE_INT_2

On entry, $\mathbf{pda}=⟨\mathit{\text{value}}⟩$, $\mathbf{n}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{pda}\ge \max \left(1,\mathbf{n}\right)$.

On entry, $\mathbf{pdb}=⟨\mathit{\text{value}}⟩$, $\mathbf{n}=⟨\mathit{\text{value}}⟩$.
Constraint: $\mathbf{pdb}\ge \max \left(1,\mathbf{n}\right)$.

7  Accuracy

8  Parallelism and Performance

9  Further Comments

10  Example

10.1  Program Text

Program Text (f16tece.c)

10.2  Program Data

Program Data (f16tece.d)

10.3  Program Results

Program Results (f16tece.r)