NAG Toolbox: nag_lapack_dsyevx (f08fb)

Purpose

Syntax

Description

References

Parameters

Compulsory Input Parameters

1:     $\mathrm{jobz}$ – string (length ≥ 1)

Indicates whether eigenvectors are computed.

$\mathbf{jobz}=\text{'N'}$

Only eigenvalues are computed.

$\mathbf{jobz}=\text{'V'}$

Eigenvalues and eigenvectors are computed.

Constraint: $\mathbf{jobz}=\text{'N'}$ or $\text{'V'}$.

2:     $\mathrm{range}$ – string (length ≥ 1)

If $\mathbf{range}=\text{'A'}$, all eigenvalues will be found.

If $\mathbf{range}=\text{'V'}$, all eigenvalues in the half-open interval $\left(\mathbf{vl},\mathbf{vu}\right]$ will be found.

If $\mathbf{range}=\text{'I'}$, the ilth to iuth eigenvalues will be found.

Constraint: $\mathbf{range}=\text{'A'}$, $\text{'V'}$ or $\text{'I'}$.

3:     $\mathrm{uplo}$ – string (length ≥ 1)

If $\mathbf{uplo}=\text{'U'}$, the upper triangular part of $A$ is stored.

If $\mathbf{uplo}=\text{'L'}$, the lower triangular part of $A$ is stored.

Constraint: $\mathbf{uplo}=\text{'U'}$ or $\text{'L'}$.

4:     $\mathrm{a}\left(\mathit{lda},:\right)$ – double array

The first dimension of the array a must be at least $\max \left(1,\mathbf{n}\right)$.

The second dimension of the array a must be at least $\max \left(1,\mathbf{n}\right)$.

The $n$ by $n$ symmetric matrix $A$.

• If $\mathbf{uplo}=\text{'U'}$, the upper triangular part of $a$ must be stored and the elements of the array below the diagonal are not referenced.
• If $\mathbf{uplo}=\text{'L'}$, the lower triangular part of $a$ must be stored and the elements of the array above the diagonal are not referenced.

5:     $\mathrm{vl}$ – double scalar

6:     $\mathrm{vu}$ – double scalar

If $\mathbf{range}=\text{'V'}$, the lower and upper bounds of the interval to be searched for eigenvalues.

If $\mathbf{range}=\text{'A'}$ or $\text{'I'}$, vl and vu are not referenced.

Constraint: if $\mathbf{range}=\text{'V'}$, $\mathbf{vl}<\mathbf{vu}$.

7:     $\mathrm{il}$ – int64int32nag_int scalar

8:     $\mathrm{iu}$ – int64int32nag_int scalar

If $\mathbf{range}=\text{'I'}$, the indices (in ascending order) of the smallest and largest eigenvalues to be returned.

If $\mathbf{range}=\text{'A'}$ or $\text{'V'}$, il and iu are not referenced.

Constraints:

• if $\mathbf{range}=\text{'I'}$ and $\mathbf{n}=0$, $\mathbf{il}=1$ and $\mathbf{iu}=0$;
• if $\mathbf{range}=\text{'I'}$ and $\mathbf{n}>0$, $1\le \mathbf{il}\le \mathbf{iu}\le \mathbf{n}$.

9:     $\mathrm{abstol}$ – double scalar

The absolute error tolerance for the eigenvalues. An approximate eigenvalue is accepted as converged when it is determined to lie in an interval $\left[a,b\right]$ of width less than or equal to

$$\mathbf{abstol}+\epsilon \max \left(\left|a\right|,\left|b\right|\right)\text{,}$$

where $\epsilon$ is the machine precision. If abstol is less than or equal to zero, then $\epsilon {‖T‖}_1$ will be used in its place, where $T$ is the tridiagonal matrix obtained by reducing $A$ to tridiagonal form. Eigenvalues will be computed most accurately when abstol is set to twice the underflow threshold $2\times \mathbf{x02am}\left( \right)$, not zero. If this function returns with $\mathbf{info}>\mathbf{0}$, indicating that some eigenvectors did not converge, try setting abstol to $2\times \mathbf{x02am}\left( \right)$. See Demmel and Kahan (1990).

Optional Input Parameters

1:     $\mathrm{n}$ – int64int32nag_int scalar

Default: the first dimension of the array a and the second dimension of the array a. (An error is raised if these dimensions are not equal.)

$n$, the order of the matrix $A$.

Constraint: $\mathbf{n}\ge 0$.

Output Parameters

1:     $\mathrm{a}\left(\mathit{lda},:\right)$ – double array

The first dimension of the array a will be $\max \left(1,\mathbf{n}\right)$.

The second dimension of the array a will be $\max \left(1,\mathbf{n}\right)$.

The lower triangle (if $\mathbf{uplo}=\text{'L'}$) or the upper triangle (if $\mathbf{uplo}=\text{'U'}$) of a, including the diagonal, is overwritten.

2:     $\mathrm{m}$ – int64int32nag_int scalar

The total number of eigenvalues found. $0\le \mathbf{m}\le \mathbf{n}$.

If $\mathbf{range}=\text{'A'}$, $\mathbf{m}=\mathbf{n}$.

If $\mathbf{range}=\text{'I'}$, $\mathbf{m}=\mathbf{iu}-\mathbf{il}+1$.

3:     $\mathrm{w}\left(:\right)$ – double array

The dimension of the array w will be $\max \left(1,\mathbf{n}\right)$

The first m elements contain the selected eigenvalues in ascending order.

4:     $\mathrm{z}\left(\mathit{ldz},:\right)$ – double array

The first dimension, $\mathit{ldz}$, of the array z will be

• if $\mathbf{jobz}=\text{'V'}$, $\mathit{ldz}=\max \left(1,\mathbf{n}\right)$;
• otherwise $\mathit{ldz}=1$.

The second dimension of the array z will be $\max \left(1,\mathbf{m}\right)$ if $\mathbf{jobz}=\text{'V'}$ and $1$ otherwise.

If $\mathbf{jobz}=\text{'V'}$, then

• if $\mathbf{info}=\mathbf{0}$, the first m columns of $Z$ contain the orthonormal eigenvectors of the matrix $A$ corresponding to the selected eigenvalues, with the $i$th column of $Z$ holding the eigenvector associated with $\mathbf{w}\left(i\right)$;
• if an eigenvector fails to converge ($\mathbf{info}>\mathbf{0}$), then that column of $Z$ contains the latest approximation to the eigenvector, and the index of the eigenvector is returned in jfail.

If $\mathbf{jobz}=\text{'N'}$, z is not referenced.

5:     $\mathrm{jfail}\left(:\right)$ – int64int32nag_int array

The dimension of the array jfail will be $\max \left(1,\mathbf{n}\right)$

If $\mathbf{jobz}=\text{'V'}$, then

• if $\mathbf{info}=\mathbf{0}$, the first m elements of jfail are zero;
• if $\mathbf{info}>\mathbf{0}$, jfail contains the indices of the eigenvectors that failed to converge.

If $\mathbf{jobz}=\text{'N'}$, jfail is not referenced.

6:     $\mathrm{info}$ – int64int32nag_int scalar

$\mathbf{info}=0$ unless the function detects an error (see Error Indicators and Warnings).

Error Indicators and Warnings

Cases prefixed with W are classified as warnings and do not generate an error of type NAG:error_n. See nag_issue_warnings.

   $\mathbf{info}<0$

If $\mathbf{info}=-i$, argument $i$ had an illegal value. An explanatory message is output, and execution of the program is terminated.

W  $\mathbf{info}>0$

The algorithm failed to converge; $\_$ eigenvectors did not converge. Their indices are stored in array jfail.

Accuracy

Further Comments

Example

Open in the MATLAB editor: f08fb_example

function f08fb_example


fprintf('f08fb example results\n\n');

% Eigenvalues between -1 and 1 of A, and corresponding eigenvectors. 
a = [1, 2, 3, 4;
     0, 2, 3, 4;
     0, 0, 3, 4;
     0, 0, 0, 4];

jobz  = 'Vectors';
range = 'Values in range';
uplo  = 'Upper';
vl = -1;
vu =  1;
il = int64(0);
iu = int64(0);
abstol = 0;
[~, m, w, z, jfail, info] = ...
  f08fb(...
        jobz, range, uplo, a, vl, vu, il, iu, abstol);

fprintf('Number of eigenvalues in [-1,1] is %2d\n',m);
fprintf(' Eigenvalues are:\n   ');
fprintf(' %7.4f',w(1:m));
fprintf('\n\n');

[ifail] = x04ca( ...
		 'General', ' ', z, 'Corresponding eigenvectors of A');

f08fb example results

Number of eigenvalues in [-1,1] is  2
 Eigenvalues are:
    -0.5146 -0.2943

 Corresponding eigenvectors of A
          1       2
 1  -0.5144  0.2767
 2   0.4851 -0.6634
 3   0.5420  0.6504
 4  -0.4543 -0.2457