NAG Library Routine Document

g04gaf  (icc)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

g04gaf calculates the intraclass correlation (ICC).

2
Specification

Fortran Interface
Subroutine g04gaf ( mtype, rtype, nrep, nsubj, nrater, score, mscore, smiss, alpha, icc, lci, uci, fstat, df1, df2, pvalue, ifail)
Integer, Intent (In):: mtype, rtype, nrep, nsubj, nrater, mscore
Integer, Intent (Inout):: ifail
Real (Kind=nag_wp), Intent (In):: score(nrep,nsubj,nrater), smiss, alpha
Real (Kind=nag_wp), Intent (Out):: icc, lci, uci, fstat, df1, df2, pvalue
C Header Interface
#include nagmk26.h
void  g04gaf_ ( const Integer *mtype, const Integer *rtype, const Integer *nrep, const Integer *nsubj, const Integer *nrater, const double score[], const Integer *mscore, const double *smiss, const double *alpha, double *icc, double *lci, double *uci, double *fstat, double *df1, double *df2, double *pvalue, Integer *ifail)

3
Description

Many scientific investigations involve assigning a value (score) to a number of objects of interest (subjects). In most instances the method used to score the subject will be affected by measurement error which can affect the analysis and interpretation of the data. When the score is based on the subjective opinion of one or more individuals (raters) the measurement error can be high and therefore it is important to be able to assess its magnitude. One way of doing this is to run a reliability study and calculate the intraclass correlation (ICC).
In a typical reliability study each of a random sample of ns subjects are scored, independently, by nr raters. Each rater scores the same subject m times (i.e., there are m replicate scores). The scores, yijk, for i=1,2,,ns, j=1,2,,nr and k=1,2,,m can be arranged into m data tables, with the ns rows of the table, labelled 1,2,,ns, corresponding to the subjects and the nr columns of the table, labelled 1,2,,nr, to the raters. For example the following data, taken from Shrout and Fleiss (1979), shows a typical situation where four raters (nr=4) have scored six subjects (ns=6) once, i.e., there has been no replication (m=1).
 Rater
Subject1234
19258
26132
38468
47126
510569
66247
The term intraclass correlation is a general one and can mean either a measure of interrater reliability, i.e., a measure of how similar the raters are, or intrarater reliability, i.e., a measure of how consistent each rater is.
There are a numerous different versions of the ICC, six of which can be calculated using g04gaf. The different versions of the ICC can lead to different conclusions when applied to the same data, it is therefore essential to choose the most appropriate based on the design of the reliability study and whether inter- or intrarater reliability is of interest. The six measures of the ICC are split into three different types of studies, denoted: ICC1,1, ICC2,1 and ICC3,1. This notation ties up with that used by Shrout and Fleiss (1979). Each class of study results in two forms of the ICC, depending on whether inter- or intrarater reliability is of interest.

3.1
ICC1,1: One-Factor Design

The one-factor designs differ, depending on whether inter- or intrarater reliability is of interest:

3.1.1
Interrater reliability

In a one-factor design to measure interrater reliability, each subject is scored by a different set of raters randomly selected from a larger population of raters. Therefore, even though they use the same set of labels each row of the data table is associated with a different set of raters.
A model of the following form is assumed:
yijk=μ+si+εijk  
where si is the subject effect and εijk is the error term, with siN0,σs2 and εijkN0,σε2.
The measure of the interrater reliability, ρ, is then given by:
ρ=σ^s2σ^s2+σ^ε2  
where σ^s and σ^ε are the estimated values of σs and σε respectively.

3.1.2
Intrarater reliability

In a one-factor design to measure intrarater reliability, each rater scores a different set of subjects. Therefore, even though they use the same set of labels, each column of the data table is associated with a different set of subjects.
A model of the following form is assumed:
yijk=μ+rj+εijk  
where ri is the rater effect and εijk is the error term, with rjN0,σr2 and εijkN0,σε2.
The measure of the intrarater reliability, γ, is then given by:
γ=σ^r2σ^r2+σ^ε2  
where σ^r and σ^ε are the estimated values of σr and σε respectively.

3.2
ICC2,1: Random Factorial Design

In a random factorial design, each subject is scored by the same set of raters. The set of raters have been randomly selected from a larger population of raters.
A model of the following form is assumed:
yijk=μ+si+rj +srij+εijk  
where si is the subject effect, ri is the rater effect, srij is the subject-rater interaction effect and εijk is the error term, with siN0,σs2, rjN0,σr2, srijN0,σsr2 and εijkN0,σε2.

3.2.1
Interrater reliability

The measure of the interrater reliability, ρ, is given by:
ρ=σ^s2σ^s2+σ^r2+σ^sr2+σ^ε2  
where σ^s, σ^r, σ^sr and σ^ε are the estimated values of σs, σr, σsr and σε respectively.

3.2.2
Intrarater reliability

The measure of the intrarater reliability, γ, is given by:
γ=σ^r2σ^s2+σ^r2+σ^sr2+σ^ε2  
where σ^s, σ^r, σ^sr and σ^ε are the estimated values of σs, σr, σsr and σε respectively.

3.3
ICC3,1: Mixed Factorial Design

In a mixed factorial design, each subject is scored by the same set of raters and these are the only raters of interest.
A model of the following form is assumed:
yijk=μ+si+rj +srij+εijk  
where si is the subject effect, ri is the fixed rater effect, srij is the subject-rater interaction effect and εijk is the error term, with siN0,σs2, Σj=1nrrj=0, srijN0,σsr2, Σj=1nrsrij=0 and εijkN0,σε2.

3.3.1
Interrater reliability

The measure of the interrater reliability, ρ, is then given by:
ρ=σ^s2-σ^sr2/r-1 σ^s2+σ^sr2+σ^ε2  
where σ^s, σ^sr and σ^ε are the estimated values of σs, σsr and σε respectively.

3.3.2
Intrarater reliability

The measure of the intrarater reliability, γ, is then given by:
γ=σ^s2+σ^sr2 σ^s2+σ^sr2+σ^ε2  
where σ^s, σ^sr and σ^ε are the estimated values of σs, σsr and σε respectively.
As well as an estimate of the ICC, g04gaf returns an approximate 1-α% confidence interval for the ICC and an F-statistic, f, associated degrees of freedom (ν1 and ν2) and p-value, p, for testing that the ICC is zero.
Details on the formula used to calculate the confidence interval, f, ν1, ν2, σ^s2, σ^r2, σ^sr2 and σ^ε2 are given in Gwet (2014). In the case where there are no missing data these should tie up with the formula presented in Shrout and Fleiss (1979).
In some circumstances, the formula presented in Gwet (2014) for calculating σ^s2, σ^r2, σ^sr2 and σ^ε2 can result in a negative value being calculated. In such instances, ifail=102, the offending estimate is set to zero and the calculations continue as normal.
It should be noted that Shrout and Fleiss (1979) also present methods for calculating the ICC based on average scores, denoted ICC1,k, ICC2,k and ICC3,k. These are not supplied here as multiple replications are allowed (m>1) hence there is no need to average the scores prior to calculating ICC when using g04gaf.

4
References

Gwet K L (2014) Handbook of Inter-rater Reliability Fourth Edition Advanced Analytics LLC
Shrout P E and Fleiss J L (1979) Intraclass Correlations: Uses in Assessing Rater Reliability Pyschological Bulletin, Vol 86 2 420–428

5
Arguments

1:     mtype – IntegerInput
On entry: indicates which model is to be used.
mtype=1
The reliability study is a one-factor design, ICC1,1.
mtype=2
The reliability study is a random factorial design, ICC2,1.
mtype=3
The reliability study is a mixed factorial design, ICC3,1.
Constraint: mtype=1, 2 or 3.
2:     rtype – IntegerInput
On entry: indicates which type of reliability is required.
rtype=1
Interrater reliability is required.
rtype=2
Intrarater reliability is required.
Constraint: rtype=1 or 2.
3:     nrep – IntegerInput
On entry: m, the number of replicates.
Constraints:
  • if mtype=2 or 3 and rtype=2, nrep2;
  • otherwise nrep1.
4:     nsubj – IntegerInput
On entry: ns, the number of subjects.
Constraint: nsubj2.
5:     nrater – IntegerInput
On entry: nr, the number of raters.
Constraint: nrater2.
6:     scorenrepnsubjnrater – Real (Kind=nag_wp) arrayInput
On entry: the matrix of scores, with scorekij being the score given to the ith subject by the jth rater in the kth replicate.
If rater j did not rate subject i at replication k, the corresponding element of score, scorekij, should be set to smiss.
7:     mscore – IntegerInput
On entry: indicates how missing scores are handled.
mscore=1
There are no missing scores.
mscore=2
Missing scores in score have been set to smiss.
Constraint: mscore=1 or 2.
8:     smiss – Real (Kind=nag_wp)Input
On entry: the value used to indicate a missing score.
  • If mscore=1, smiss is not referenced and need not be set.
  • If mscore=2, care should be taken in the selection of smiss, the value used to indicate a missing score. g04gaf will treat any score in the inclusive range 1±0.1x02bef-2×smiss as missing. Alternatively, a NaN (Not A Number) can be used to indicate missing values, in which case the value of smiss and any missing values of score can be set through a call to x07bbf.
9:     alpha – Real (Kind=nag_wp)Input
On entry: α, the significance level used in the construction of the confidence intervals for icc.
Constraint: 0<alpha<1.
10:   icc – Real (Kind=nag_wp)Output
On exit: an estimate of the intraclass correlation to measure either the interrater reliability, ρ, or intrarater reliability, γ, as specified by mtype and rtype.
11:   lci – Real (Kind=nag_wp)Output
On exit: an approximate lower limit for the 1001-α% confidence interval for the ICC.
12:   uci – Real (Kind=nag_wp)Output
On exit: an approximate upper limit for the 1001-α% confidence interval for the ICC.
In some circumstances it is possible for the estimate of the intraclass correlation to fall outside the region of the approximate confidence intervals. In these cases g04gaf returns all calculated values, but raises the warning ifail=101.
13:   fstat – Real (Kind=nag_wp)Output
On exit: f, the F-statistic associated with icc.
14:   df1 – Real (Kind=nag_wp)Output
15:   df2 – Real (Kind=nag_wp)Output
On exit: ν1 and ν2, the degrees of freedom associated with f.
16:   pvalue – Real (Kind=nag_wp)Output
On exit: PFf:ν1,ν1, the upper tail probability from an F distribution.
17:   ifail – IntegerInput/Output
On entry: ifail must be set to 0, -1​ or ​1. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1​ or ​1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this argument, the recommended value is 0. When the value -1​ or ​1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6
Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=11
On entry, mtype=value.
Constraint: mtype=1, 2 or 3.
ifail=21
On entry, rtype=value.
Constraint: rtype=1 or 2.
ifail=31
On entry, nrep=value.
Constraint: nrep1.
ifail=32
On entry, nrep=value.
Constraint: when mtype=2 or 3 and rtype=2, nrep2.
ifail=33
On entry, after adjusting for missing data, nrep=value.
Constraint: nrep1.
ifail=34
On entry, after adjusting for missing data, nrep=value.
Constraint: when mtype=2 or 3 and rtype=2, nrep2.
ifail=41
On entry, nsubj=value.
Constraint: nsubj2.
ifail=42
On entry, after adjusting for missing data, nsubj=value.
Constraint: nsubj2.
ifail=51
On entry, nrater=value.
Constraint: nrater2.
ifail=52
On entry, after adjusting for missing data, nrater=value.
Constraint: nrater2.
ifail=61
Unable to calculate the ICC due to a division by zero.
This is often due to degenerate data, for example all scores being the same.
ifail=62
On entry, a replicate, subject or rater contained all missing data.
All output quantities have been calculated using the reduced problem size.
ifail=71
On entry, mscore=value.
Constraint: mscore=1 or 2.
ifail=91
On entry, alpha=value.
Constraint: 0<alpha<1.
ifail=92
On entry, alpha=value.
alpha is too close to either zero or one.
This error is unlikely to occur.
ifail=101
icc does not fall into the interval lci,uci.
All output quantities have been calculated.
ifail=102
The estimate of at least one variance component was negative.
Negative estimates were set to zero and all output quantities calculated as documented.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

7
Accuracy

Not applicable.

8
Parallelism and Performance

g04gaf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
g04gaf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9
Further Comments

None.

10
Example

This example calculates and displays the measure of interrater reliability, ρ, for a one-factor design, ICC1,1. In addition the 95% confidence interval, F-statistic, degrees of freedom and p-value are presented.
The data is taken from table 2 of Shrout and Fleiss (1979), which has four raters scoring six subjects.

10.1
Program Text

Program Text (g04gafe.f90)

10.2
Program Data

Program Data (g04gafe.d)

10.3
Program Results

Program Results (g04gafe.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017