Integer, Intent (In)	::	n, lda
Integer, Intent (Inout)	::	ifail
Real (Kind=nag_wp), Intent (Inout)	::	a(lda,*)
Real (Kind=nag_wp), Intent (Out)	::	imnorm
Character (*), Intent (In)	::	fun

C Header Interface

#include nagmk26.h

void	f01ekf_ ( const char fun, const Integer n, double a[], const Integer lda, double imnorm, Integer *ifail, const Charlen length_fun)

3

Description

f (A)

, where

f

is either the exponential, sine, cosine, sinh or cosh, is computed using the Schur–Parlett algorithm described in Higham (2008) and Davies and Higham (2003).

4

References

Davies P I and Higham N J (2003) A Schur–Parlett algorithm for computing matrix functions. SIAM J. Matrix Anal. Appl. 25(2) 464–485

Higham N J (2008) Functions of Matrices: Theory and Computation SIAM, Philadelphia, PA, USA

5

Arguments

1: $fun$ – Character(*)Input

On entry: indicates which matrix function will be computed.

$fun ='EXP'$: The matrix exponential, $e^{A}$ , will be computed.
$fun ='SIN'$: The matrix sine, $\sin (A)$ , will be computed.
$fun ='COS'$: The matrix cosine, $\cos (A)$ , will be computed.
$fun ='SINH'$: The hyperbolic matrix sine, $\sinh (A)$ , will be computed.
$fun ='COSH'$: The hyperbolic matrix cosine, $\cosh (A)$ , will be computed.

Constraint:

fun ='EXP'

'SIN'

'COS'

'SINH'

'COSH'

2: $n$ – IntegerInput

On entry:

n

, the order of the matrix

A

Constraint:

n \geq 0

3: $a (lda *)$ – Real (Kind=nag_wp) arrayInput/Output

Note: the second dimension of the array a must be at least

n

On entry: the

n

n

matrix

A

On exit: the

n

n

matrix,

f (A)

4: $lda$ – IntegerInput

On entry: the first dimension of the array a as declared in the (sub)program from which f01ekf is called.

Constraint:

lda \geq n

5: $imnorm$ – Real (Kind=nag_wp)Output

On exit: if

A

has complex eigenvalues, f01ekf will use complex arithmetic to compute the matrix function. The imaginary part is discarded at the end of the computation, because it will theoretically vanish. imnorm contains the

1

-norm of the imaginary part, which should be used to check that the routine has given a reliable answer.

A

has real eigenvalues, f01ekf uses real arithmetic and

imnorm = 0

6: $ifail$ – IntegerInput/Output

On entry: ifail must be set to

0

- 1 ​ or ​ 1

. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.

For environments where it might be inappropriate to halt program execution when an error is detected, the value

- 1 ​ or ​ 1

is recommended. If the output of error messages is undesirable, then the value

1

is recommended. Otherwise, if you are not familiar with this argument, the recommended value is

0

. When the value $- 1 or 1$ is used it is essential to test the value of ifail on exit.

On exit:

ifail = 0

unless the routine detects an error or a warning has been flagged (see Section 6).

6

Error Indicators and Warnings

If on entry

ifail = 0

- 1

, explanatory error messages are output on the current error message unit (as defined by x04aaf).

Errors or warnings detected by the routine:

$ifail = 1$: A Taylor series failed to converge.

$ifail = 2$: An unexpected internal error occurred when evaluating the function at a point. Please contact NAG.

$ifail = 3$: There was an error whilst reordering the Schur form of $A$ .
Note: this failure should not occur and suggests that the routine has been called incorrectly.

$ifail = 4$: The routine was unable to compute the Schur decomposition of $A$ .
Note: this failure should not occur and suggests that the routine has been called incorrectly.

$ifail = 5$: An unexpected internal error occurred. Please contact NAG.

$ifail = 6$: The linear equations to be solved are nearly singular and the Padé approximant used to compute the exponential may have no correct figures.
Note: this failure should not occur and suggests that the routine has been called incorrectly.

$ifail = - 1$: On entry, $fun = 〈value〉$ was an illegal value.

$ifail = - 2$: Input argument number $〈value〉$ is invalid.

$ifail = - 4$: On entry, argument lda is invalid.
Constraint: $lda \geq n$ .

$ifail = - 99$: An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.

$ifail = - 399$: Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.

$ifail = - 999$: Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

7

Accuracy

For a normal matrix

A

(for which

A^{T} A = A A^{T}

), the Schur decomposition is diagonal and the algorithm reduces to evaluating

f

at the eigenvalues of

A

and then constructing

f (A)

using the Schur vectors. This should give a very accurate result. In general, however, no error bounds are available for the algorithm.

For further discussion of the Schur–Parlett algorithm see Section 9.4 of Higham (2008).

8

Parallelism and Performance

f01ekf is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library. In these implementations, this routine may make calls to the user-supplied functions from within an OpenMP parallel region. Thus OpenMP directives within the user functions can only be used if you are compiling the user-supplied function and linking the executable in accordance with the instructions in the Users' Note for your implementation.

f01ekf makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.

Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9

Further Comments

The integer allocatable memory required is

n

. If

A

has real eigenvalues then up to

9 n^{2}

of real allocatable memory may be required. If

A

has complex eigenvalues then up to

9 n^{2}

of complex allocatable memory may be required.

The cost of the Schur–Parlett algorithm depends on the spectrum of

A

, but is roughly between

28 n^{3}

and

n^{4} / 3

floating-point operations; see Algorithm 9.6 of Higham (2008).

If the matrix exponential is required then it is recommended that f01ecf be used. f01ecf uses an algorithm which is, in general, more accurate than the Schur–Parlett algorithm used by f01ekf.

If estimates of the condition number of the matrix function are required then f01jaf should be used.

f01fkf can be used to find the matrix exponential, sin, cos, sinh or cosh of a complex matrix.

10

Example

This example finds the matrix cosine of the matrix

A = (\begin{array}{r} 2 & 0 & 1 & 0 \\ 0 & 2 & - 2 & 1 \\ 0 & 2 & 3 & 1 \\ 1 & 4 & 0 & 0 \end{array}) .

NAG Library Routine Document

f01ekf (real_gen_matrix_fun_std)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

1

Purpose

2

Specification

3

Description

4

References

5

Arguments

6

Error Indicators and Warnings

7

Accuracy

8

Parallelism and Performance

9

Further Comments

10

Example

10.1

Program Text

10.2

Program Data

10.3

Program Results