NAG Library Routine Document

e02jef  (dim2_spline_ts_evalv)

1

Purpose

2

Specification

3

Description

4

References

5

Arguments

1:     $\mathbf{nevalv}$ – IntegerInput

On entry: $n$, the number of values at which the spline is to be evaluated.

Constraint: $\mathbf{nevalv}\ge 1$.

2:     $\mathbf{xevalv}\left(\mathbf{nevalv}\right)$ – Real (Kind=nag_wp) arrayInput

On entry: the $\left(x_i\right)$ values at which the spline is to be evaluated.

Constraint: for all $i$, $\mathbf{xevalv}\left(i\right)$ must lie inside, or on the boundary of, the spline's bounding box as determined by e02jdf.

3:     $\mathbf{yevalv}\left(\mathbf{nevalv}\right)$ – Real (Kind=nag_wp) arrayInput

On entry: the $\left(y_i\right)$ values at which the spline is to be evaluated.

Constraint: for all $i$, $\mathbf{yevalv}\left(i\right)$ must lie inside, or on the boundary of, the spline's bounding box as determined by e02jdf.

4:     $\mathbf{coefs}\left(*\right)$ – Real (Kind=nag_wp) arrayCommunication Array

Note: the dimension of this array is dictated by the requirements of associated functions that must have been previously called. This array must be the same array passed as argument coefs in the previous call to e02jdf.

On entry: the computed spline coefficients as output from e02jdf.

5:     $\mathbf{fevalv}\left(\mathbf{nevalv}\right)$ – Real (Kind=nag_wp) arrayOutput

On exit: if $\mathbf{ifail}=\mathbf{0}$ on exit $\mathbf{fevalv}\left(i\right)$ contains the computed spline value at $\left(x_i,y_i\right)$.

6:     $\mathbf{iopts}\left(*\right)$ – Integer arrayCommunication Array

Note: the dimension of this array is dictated by the requirements of associated functions that must have been previously called. This array must be the same array passed as argument iopts in the previous call to e02zkf.

On entry: the contents of the array must not have been modified either directly or indirectly, by a call to e02zkf, between calls to e02jdf and e02jef.

7:     $\mathbf{opts}\left(*\right)$ – Real (Kind=nag_wp) arrayCommunication Array

Note: the dimension of this array is dictated by the requirements of associated functions that must have been previously called. This array must be the same array passed as argument opts in the previous call to e02zkf.

On entry: the contents of the array must not have been modified either directly or indirectly, by a call to e02zkf, between calls to e02jdf and e02jef.

8:     $\mathbf{ifail}$ – IntegerInput/Output

On entry: ifail must be set to $0$, $-1\text{ or }1$. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.

For environments where it might be inappropriate to halt program execution when an error is detected, the value $-1\text{ or }1$ is recommended. If the output of error messages is undesirable, then the value $1$ is recommended. Otherwise, if you are not familiar with this argument, the recommended value is $0$. When the value $-\mathbf{1}\text{ or }\mathbf{1}$ is used it is essential to test the value of ifail on exit.

On exit: $\mathbf{ifail}=\mathbf{0}$ unless the routine detects an error or a warning has been flagged (see Section 6).

6

Error Indicators and Warnings

$\mathbf{ifail}=2$

On entry, $\mathbf{nevalv}=〈\mathit{\text{value}}〉$.
Constraint: $\mathbf{nevalv}\ge 1$.

$\mathbf{ifail}=9$

Option arrays are not initialized or are corrupted.

$\mathbf{ifail}=10$

The fitting routine has not been called, or the array of coefficients has been corrupted.

$\mathbf{ifail}=13$

On entry, $\mathbf{xevalv}\left(〈\mathit{\text{value}}〉\right)=〈\mathit{\text{value}}〉$ was outside the bounding box.
Constraint: $〈\mathit{\text{value}}〉\le \mathbf{xevalv}\left(i\right)\le 〈\mathit{\text{value}}〉$ for all $i$.

$\mathbf{ifail}=14$

On entry, $\mathbf{yevalv}\left(〈\mathit{\text{value}}〉\right)=〈\mathit{\text{value}}〉$ was outside the bounding box.
Constraint: $〈\mathit{\text{value}}〉\le \mathbf{yevalv}\left(i\right)\le 〈\mathit{\text{value}}〉$ for all $i$.

$\mathbf{ifail}=-99$

An unexpected error has been triggered by this routine. Please contact NAG.

See Section 3.9 in How to Use the NAG Library and its Documentation for further information.

$\mathbf{ifail}=-399$

Your licence key may have expired or may not have been installed correctly.

See Section 3.8 in How to Use the NAG Library and its Documentation for further information.

$\mathbf{ifail}=-999$

Dynamic memory allocation failed.

See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

7

Accuracy

8

Parallelism and Performance

9

Further Comments

10

Example