S14CBF (PDF version)
S Chapter Contents
S Chapter Introduction
NAG Library Manual

NAG Library Routine Document

S14CBF

Note:  before using this routine, please read the Users' Note for your implementation to check the interpretation of bold italicised terms and other implementation-dependent details.

 Contents

    1  Purpose
    7  Accuracy

1  Purpose

S14CBF returns the value of the logarithm of the beta function, lnBa,b, via the routine name.

2  Specification

FUNCTION S14CBF ( A, B, IFAIL)
REAL (KIND=nag_wp) S14CBF
INTEGER  IFAIL
REAL (KIND=nag_wp)  A, B

3  Description

S14CBF calculates values for lnBa,b where B is the beta function given by
Ba,b = 0 1 ta-1 1-t b-1 dt  
or equivalently
Ba,b = Γa Γb Γa+b  
and Γx is the gamma function. Note that the beta function is symmetric, so that Ba,b=Bb,a.
In order to efficiently obtain accurate results several methods are used depending on the parameters a and b.
Let a0=mina,b and b0=maxa,b. Then:
for a08,
lnB = 0.5 ln 2π -0.5 lnb0 + Δa0 + Δ b0 - Δ a0+b0 - u - v ;  
where
for a0<1,
for 2<a0<8,  a0 is reduced to the interval 1,2 by Ba,b=a0-1a0+b0-1 Ba0-1,b0;
for 1a02,
S14CBF is derived from BETALN in DiDonato and Morris (1992).

4  References

DiDonato A R and Morris A H (1992) Algorithm 708: Significant digit computation of the incomplete beta function ratios ACM Trans. Math. Software 18 360–373

5  Parameters

1:     A – REAL (KIND=nag_wp)Input
On entry: the argument a of the function.
Constraint: A>0.0.
2:     B – REAL (KIND=nag_wp)Input
On entry: the argument b of the function.
Constraint: B>0.0.
3:     IFAIL – INTEGERInput/Output
On entry: IFAIL must be set to 0, -1​ or ​1. If you are unfamiliar with this parameter you should refer to Section 3.3 in the Essential Introduction for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1​ or ​1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this parameter, the recommended value is 0. When the value -1​ or ​1 is used it is essential to test the value of IFAIL on exit.
On exit: IFAIL=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6  Error Indicators and Warnings

If on entry IFAIL=0 or -1, explanatory error messages are output on the current error message unit (as defined by X04AAF).
Errors or warnings detected by the routine:
IFAIL=1
On entry, A=value.
Constraint: A>0.0.
On entry, B=value.
Constraint: B>0.0.
IFAIL=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.8 in the Essential Introduction for further information.
IFAIL=-399
Your licence key may have expired or may not have been installed correctly.
See Section 3.7 in the Essential Introduction for further information.
IFAIL=-999
Dynamic memory allocation failed.
See Section 3.6 in the Essential Introduction for further information.

7  Accuracy

S14CBF should produce full relative accuracy for all input arguments.

8  Parallelism and Performance

Not applicable.

9  Further Comments

None.

10  Example

This example reads values of the arguments a and b from a file, evaluates the function and prints the results.

10.1  Program Text

Program Text (s14cbfe.f90)

10.2  Program Data

Program Data (s14cbfe.d)

10.3  Program Results

Program Results (s14cbfe.r)


S14CBF (PDF version)
S Chapter Contents
S Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2015