F08KQF (ZGELSD) (PDF version)
F08 Chapter Contents
F08 Chapter Introduction
NAG Library Manual

NAG Library Routine Document

F08KQF (ZGELSD)

Note:  before using this routine, please read the Users' Note for your implementation to check the interpretation of bold italicised terms and other implementation-dependent details.

 Contents

    1  Purpose
    7  Accuracy

1  Purpose

F08KQF (ZGELSD) computes the minimum norm solution to a complex linear least squares problem
minx b-Ax2 .  

2  Specification

SUBROUTINE F08KQF ( M, N, NRHS, A, LDA, B, LDB, S, RCOND, RANK, WORK, LWORK, RWORK, IWORK, INFO)
INTEGER  M, N, NRHS, LDA, LDB, RANK, LWORK, IWORK(*), INFO
REAL (KIND=nag_wp)  S(*), RCOND, RWORK(*)
COMPLEX (KIND=nag_wp)  A(LDA,*), B(LDB,*), WORK(max(1,LWORK))
The routine may be called by its LAPACK name zgelsd.

3  Description

F08KQF (ZGELSD) uses the singular value decomposition (SVD) of A, where A is a complex m by n matrix which may be rank-deficient.
Several right-hand side vectors b and solution vectors x can be handled in a single call; they are stored as the columns of the m by r right-hand side matrix B and the n by r solution matrix X.
The problem is solved in three steps:
1. reduce the coefficient matrix A to bidiagonal form with Householder transformations, reducing the original problem into a ‘bidiagonal least squares problem’ (BLS);
2. solve the BLS using a divide-and-conquer approach;
3. apply back all the Householder transformations to solve the original least squares problem.
The effective rank of A is determined by treating as zero those singular values which are less than RCOND times the largest singular value.

4  References

Anderson E, Bai Z, Bischof C, Blackford S, Demmel J, Dongarra J J, Du Croz J J, Greenbaum A, Hammarling S, McKenney A and Sorensen D (1999) LAPACK Users' Guide (3rd Edition) SIAM, Philadelphia http://www.netlib.org/lapack/lug
Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

5  Parameters

1:     M – INTEGERInput
On entry: m, the number of rows of the matrix A.
Constraint: M0.
2:     N – INTEGERInput
On entry: n, the number of columns of the matrix A.
Constraint: N0.
3:     NRHS – INTEGERInput
On entry: r, the number of right-hand sides, i.e., the number of columns of the matrices B and X.
Constraint: NRHS0.
4:     ALDA* – COMPLEX (KIND=nag_wp) arrayInput/Output
Note: the second dimension of the array A must be at least max1,N.
On entry: the m by n coefficient matrix A.
On exit: the contents of A are destroyed.
5:     LDA – INTEGERInput
On entry: the first dimension of the array A as declared in the (sub)program from which F08KQF (ZGELSD) is called.
Constraint: LDAmax1,M.
6:     BLDB* – COMPLEX (KIND=nag_wp) arrayInput/Output
Note: the second dimension of the array B must be at least max1,NRHS.
On entry: the m by r right-hand side matrix B.
On exit: B is overwritten by the n by r solution matrix X. If mn and RANK=n, the residual sum of squares for the solution in the ith column is given by the sum of squares of the modulus of elements n+1,,m in that column.
7:     LDB – INTEGERInput
On entry: the first dimension of the array B as declared in the (sub)program from which F08KQF (ZGELSD) is called.
Constraint: LDBmax1,M,N.
8:     S* – REAL (KIND=nag_wp) arrayOutput
Note: the dimension of the array S must be at least max1,minM,N .
On exit: the singular values of A in decreasing order.
9:     RCOND – REAL (KIND=nag_wp)Input
On entry: used to determine the effective rank of A. Singular values SiRCOND×S1 are treated as zero. If RCOND<0, machine precision is used instead.
10:   RANK – INTEGEROutput
On exit: the effective rank of A, i.e., the number of singular values which are greater than RCOND×S1.
11:   WORKmax1,LWORK – COMPLEX (KIND=nag_wp) arrayWorkspace
On exit: if INFO=0, the real part of WORK1 contains the minimum value of LWORK required for optimal performance.
12:   LWORK – INTEGERInput
On entry: the dimension of the array WORK as declared in the (sub)program from which F08KQF (ZGELSD) is called.
The exact minimum amount of workspace needed depends on M, N and NRHS. As long as LWORK is at least
max1,M+N+r,2r+r×NRHS ,  
where r=minM,N, the code will execute correctly.
If LWORK=-1, a workspace query is assumed; the routine only calculates the optimal size of the WORK array and the minimum size of the IWORK array, and returns these values as the first entries of the WORK and IWORK arrays, and no error message related to LWORK is issued.
Suggested value: for optimal performance, LWORK should generally be larger than the required minimum. Consider increasing LWORK by at least nb×minM,N , where nb  is the optimal block size.
Constraint: LWORK must be at least max1,M+N+r,2r+r×NRHS or LWORK=-1.
13:   RWORK* – REAL (KIND=nag_wp) arrayWorkspace
Note: the dimension of the array RWORK must be at least max1,lrwork, where lrwork is at least
10× N+2× N× smlsiz+8× N× nlvl+3× smlsiz× NRHS+smlsiz+12 ,   if ​ MN  
or
10× M+2× M× smlsiz+8× M× nlvl+3× smlsiz× NRHS+smlsiz+12 ,   if ​ M<N  
where smlsiz is equal to the maximum size of the subproblems at the bottom of the computation tree (usually about 25), and nlvl = max0, int log2 minM,N / smlsiz+1 +1 , the code will execute correctly.
On exit: if INFO=0, RWORK1 contains the required minimal size of lrwork.
14:   IWORK* – INTEGER arrayWorkspace
Note: the dimension of the array IWORK must be at least max1,liwork, where liwork is at least max1,3×minM,N×nlvl+11×minM,N.
On exit: if INFO=0, IWORK1 returns the minimum liwork.
15:   INFO – INTEGEROutput
On exit: INFO=0 unless the routine detects an error (see Section 6).

6  Error Indicators and Warnings

INFO<0
If INFO=-i, argument i had an illegal value. An explanatory message is output, and execution of the program is terminated.
INFO>0
The algorithm for computing the SVD failed to converge; if INFO=i, i off-diagonal elements of an intermediate bidiagonal form did not converge to zero.

7  Accuracy

See Section 4.5 of Anderson et al. (1999) for details.

8  Parallelism and Performance

F08KQF (ZGELSD) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
F08KQF (ZGELSD) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the X06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this routine. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9  Further Comments

The real analogue of this routine is F08KCF (DGELSD).

10  Example

This example solves the linear least squares problem
minx b-Ax2  
for the solution, x, of minimum norm, where
A = 0.47-0.34i -0.32-0.23i 0.35-0.60i 0.89+0.71i -0.19+0.06i -0.40+0.54i -0.05+0.20i -0.52-0.34i -0.45-0.45i 0.11-0.85i 0.60+0.01i -0.26-0.44i 0.87-0.11i -0.02-0.57i 1.44+0.80i 0.80-1.02i -0.43+0.17i -0.34-0.09i 1.14-0.78i 0.07+1.14i  
and
b = 2.15-0.20i -2.24+1.82i 4.45-4.28i 5.70-6.25i .  
A tolerance of 0.01 is used to determine the effective rank of A.
Note that the block size (NB) of 64 assumed in this example is not realistic for such a small problem, but should be suitable for large problems.

10.1  Program Text

Program Text (f08kqfe.f90)

10.2  Program Data

Program Data (f08kqfe.d)

10.3  Program Results

Program Results (f08kqfe.r)


F08KQF (ZGELSD) (PDF version)
F08 Chapter Contents
F08 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2015