NAG Library Routine Document

F11MKF

1  Purpose

2  Specification

3  Description

4  References

5  Parameters

1:     TRANS – CHARACTER(1)Input

On entry: specifies whether or not the matrix $A$ is transposed.

$\mathbf{TRANS}=\text{'N'}$

$\alpha AB+\beta C$ is computed.

$\mathbf{TRANS}=\text{'T'}$

$\alpha A^{\mathrm{T}}B+\beta C$ is computed.

Constraint: $\mathbf{TRANS}=\text{'N'}$ or $\text{'T'}$.

2:     N – INTEGERInput

On entry: $n$, the order of the matrix $A$.

Constraint: $\mathbf{N}\ge 0$.

3:     M – INTEGERInput

On entry: $m$, the number of columns of matrices $B$ and $C$.

Constraint: $\mathbf{M}\ge 0$.

4:     ALPHA – REAL (KIND=nag_wp)Input

On entry: $\alpha$, the scalar factor in the matrix multiplication.

5:     ICOLZP($*$) – INTEGER arrayInput

Note: the dimension of the array ICOLZP must be at least $\mathbf{N}+1$.

On entry: $\mathbf{ICOLZP}\left(i\right)$ contains the index in $A$ of the start of a new column. See Section 2.1.3 in the F11 Chapter Introduction.

6:     IROWIX($*$) – INTEGER arrayInput

Note: the dimension of the array IROWIX must be at least $\mathbf{ICOLZP}\left(\mathbf{N}+1\right)-1$, the number of nonzeros of the sparse matrix $A$.

On entry: the row index array of sparse matrix $A$.

7:     A($*$) – REAL (KIND=nag_wp) arrayInput

Note: the dimension of the array A must be at least $\mathbf{ICOLZP}\left(\mathbf{N}+1\right)-1$, the number of nonzeros of the sparse matrix $A$.

On entry: the array of nonzero values in the sparse matrix $A$.

8:     B(LDB,$*$) – REAL (KIND=nag_wp) arrayInput

Note: the second dimension of the array B must be at least $\max \left(1,\mathbf{M}\right)$.

On entry: the $n$ by $m$ matrix $B$.

9:     LDB – INTEGERInput

On entry: the first dimension of the array B as declared in the (sub)program from which F11MKF is called.

Constraint: $\mathbf{LDB}\ge \max \left(1,\mathbf{N}\right)$.

10:   BETA – REAL (KIND=nag_wp)Input

On entry: the scalar factor $\beta$.

11:   C(LDC,$*$) – REAL (KIND=nag_wp) arrayInput/Output

Note: the second dimension of the array C must be at least $\max \left(1,\mathbf{M}\right)$.

On entry: the $n$ by $m$ matrix $C$.

On exit: $C$ is overwritten by $\alpha AB+\beta C$ or $\alpha A^{\mathrm{T}}B+\beta C$ depending on the value of TRANS.

12:   LDC – INTEGERInput

On entry: the first dimension of the array C as declared in the (sub)program from which F11MKF is called.

Constraint: $\mathbf{LDC}\ge \max \left(1,\mathbf{N}\right)$.

13:   IFAIL – INTEGERInput/Output

On entry: IFAIL must be set to $0$, $-1\text{ or }1$. If you are unfamiliar with this parameter you should refer to Section 3.3 in the Essential Introduction for details.

For environments where it might be inappropriate to halt program execution when an error is detected, the value $-1\text{ or }1$ is recommended. If the output of error messages is undesirable, then the value $1$ is recommended. Otherwise, if you are not familiar with this parameter, the recommended value is $0$. When the value $-\mathbf{1}\text{ or }\mathbf{1}$ is used it is essential to test the value of IFAIL on exit.

On exit: $\mathbf{IFAIL}=\mathbf{0}$ unless the routine detects an error or a warning has been flagged (see Section 6).

6  Error Indicators and Warnings

$\mathbf{IFAIL}=1$

On entry,	$\mathbf{TRANS}\ne \text{'N'}$ or $\text{'T'}$,
or	$\mathbf{N}<0$,
or	$\mathbf{M}<0$,
or	$\mathbf{LDB}<\max \left(1,\mathbf{N}\right)$,
or	$\mathbf{LDC}<\max \left(1,\mathbf{N}\right)$.

7  Accuracy

8  Further Comments

9  Example

9.1  Program Text

Program Text (f11mkfe.f90)

9.2  Program Data

Program Data (f11mkfe.d)

9.3  Program Results

Program Results (f11mkfe.r)