NAG Library Routine Document

F08XSF (ZHGEQZ)

INTEGER	N, ILO, IHI, LDA, LDB, LDQ, LDZ, LWORK, INFO
REAL (KIND=nag_wp)	RWORK(N)
COMPLEX (KIND=nag_wp)	A(LDA,), B(LDB,), ALPHA(N), BETA(N), Q(LDQ,), Z(LDZ,), WORK(max(1,LWORK))
CHARACTER(1)	JOB, COMPQ, COMPZ

The routine may be called by its LAPACK name zhgeqz.

3 Description

F08XSF (ZHGEQZ) implements a single-shift version of the

Q Z

method for finding the generalized eigenvalues of the complex matrix pair

(A, B)

which is in the generalized upper Hessenberg form. If the matrix pair

(A, B)

is not in the generalized upper Hessenberg form, then the routine F08WSF (ZGGHRD) should be called before invoking F08XSF (ZHGEQZ).

This problem is mathematically equivalent to solving the matrix equation

\det (A - λ B) = 0 .

Note that, to avoid underflow, overflow and other arithmetic problems, the generalized eigenvalues

λ_{j}

are never computed explicitly by this routine but defined as ratios between two computed values,

α_{j}

and

β_{j}

λ_{j} = α_{j} / β_{j} .

The parameters

α_{j}

, in general, are finite complex values and

β_{j}

are finite real non-negative values.

If desired, the matrix pair

(A, B)

may be reduced to generalized Schur form. That is, the transformed matrices

A

and

B

are upper triangular and the diagonal values of

A

and

B

provide

α

and

β

The parameter JOB specifies two options. If

JOB ='S'

then the matrix pair

(A, B)

is simultaneously reduced to Schur form by applying one unitary transformation (usually called

Q

) on the left and another (usually called

Z

) on the right. That is,

\begin{matrix} A \leftarrow Q^{H} A Z \\ B \leftarrow Q^{H} B Z \end{matrix}

JOB ='E'

, then at each iteration the same transformations are computed but they are only applied to those parts of

A

and

B

which are needed to compute

α

and

β

. This option could be used if generalized eigenvalues are required but not generalized eigenvectors.

JOB ='S'

and

COMPQ ='V'

'I'

, and

COMPZ ='V'

'I'

, then the unitary transformations used to reduce the pair

(A, B)

are accumulated into the input arrays Q and Z. If generalized eigenvectors are required then JOB must be set to

JOB ='S'

and if left (right) generalized eigenvectors are to be computed then COMPQ (COMPZ) must be set to

COMPQ ='V'

'I'

rather than

COMPQ ='N'

COMPQ ='I'

, then eigenvectors are accumulated on the identity matrix and on exit the array Q contains the left eigenvector matrix

Q

. However, if

COMPQ ='V'

then the transformations are accumulated in the user-supplied matrix

Q_{0}

in array Q on entry and thus on exit Q contains the matrix product

Q Q_{0}

. A similar convention is used for COMPZ.

4 References

Anderson E, Bai Z, Bischof C, Blackford S, Demmel J, Dongarra J J, Du Croz J J, Greenbaum A, Hammarling S, McKenney A and Sorensen D (1999) LAPACK Users' Guide (3rd Edition) SIAM, Philadelphia

Golub G H and Van Loan C F (1996) Matrix Computations (3rd Edition) Johns Hopkins University Press, Baltimore

Moler C B and Stewart G W (1973) An algorithm for generalized matrix eigenproblems SIAM J. Numer. Anal. 10 241–256

Stewart G W and Sun J-G (1990) Matrix Perturbation Theory Academic Press, London

5 Parameters

1: JOB – CHARACTER(1)Input

On entry: specifies the operations to be performed on

(A, B)

$JOB ='E'$: The matrix pair $(A, B)$ on exit might not be in the generalized Schur form.
$JOB ='S'$: The matrix pair $(A, B)$ on exit will be in the generalized Schur form.

Constraint:

JOB ='E'

'S'

2: COMPQ – CHARACTER(1)Input

On entry: specifies the operations to be performed on

Q

$COMPQ ='N'$: The array Q is unchanged.
$COMPQ ='V'$: The left transformation $Q$ is accumulated on the array Q.
$COMPQ ='I'$: The array Q is initialized to the identity matrix before the left transformation $Q$ is accumulated in Q.

Constraint:

COMPQ ='N'

'V'

'I'

3: COMPZ – CHARACTER(1)Input

On entry: specifies the operations to be performed on

Z

$COMPZ ='N'$: The array Z is unchanged.
$COMPZ ='V'$: The right transformation $Z$ is accumulated on the array Z.
$COMPZ ='I'$: The array Z is initialized to the identity matrix before the right transformation $Z$ is accumulated in Z.

Constraint:

COMPZ ='N'

'V'

'I'

4: N – INTEGERInput

On entry:

n

, the order of the matrices

A

B

Q

and

Z

Constraint:

N \geq 0

5: ILO – INTEGERInput

6: IHI – INTEGERInput

On entry: the indices

i_{lo}

and

i_{hi}

, respectively which define the upper triangular parts of

A

. The submatrices

A (1 : i_{lo} - 1, 1 : i_{lo} - 1)

and

A (i_{hi} + 1 : n, i_{hi} + 1 : n)

are then upper triangular. These parameters are provided by F08WVF (ZGGBAL) if the matrix pair was previously balanced; otherwise,

ILO = 1

and

IHI = N

Constraints:

if $N > 0$ , $1 \leq ILO \leq IHI \leq N$ ;
if $N = 0$ , $ILO = 1$ and $IHI = 0$ .

7: A(LDA, $*$ ) – COMPLEX (KIND=nag_wp) arrayInput/Output

Note: the second dimension of the array A must be at least

\max (1, N)

On entry: the

n

n

upper Hessenberg matrix

A

. The elements below the first subdiagonal must be set to zero.

On exit: if

JOB ='S'

, the matrix pair

(A, B)

will be simultaneously reduced to generalized Schur form.

JOB ='E'

, the

1

1

and

2

2

diagonal blocks of the matrix pair

(A, B)

will give generalized eigenvalues but the remaining elements will be irrelevant.

8: LDA – INTEGERInput

On entry: the first dimension of the array A as declared in the (sub)program from which F08XSF (ZHGEQZ) is called.

Constraint:

LDA \geq \max (1, N)

9: B(LDB, $*$ ) – COMPLEX (KIND=nag_wp) arrayInput/Output

Note: the second dimension of the array B must be at least

\max (1, N)

On entry: the

n

n

upper triangular matrix

B

. The elements below the diagonal must be zero.

On exit: if

JOB ='S'

, the matrix pair

(A, B)

will be simultaneously reduced to generalized Schur form.

JOB ='E'

, the

1

1

and

2

2

diagonal blocks of the matrix pair

(A, B)

will give generalized eigenvalues but the remaining elements will be irrelevant.

10: LDB – INTEGERInput

On entry: the first dimension of the array B as declared in the (sub)program from which F08XSF (ZHGEQZ) is called.

Constraint:

LDB \geq \max (1, N)

11: ALPHA(N) – COMPLEX (KIND=nag_wp) arrayOutput

On exit:

α_{j}

, for

j = 1, 2, \dots, n

12: BETA(N) – COMPLEX (KIND=nag_wp) arrayOutput

On exit:

β_{j}

, for

j = 1, 2, \dots, n

13: Q(LDQ, $*$ ) – COMPLEX (KIND=nag_wp) arrayInput/Output

Note: the second dimension of the array Q must be at least

\max (1, N)

COMPQ ='V'

'I'

and at least

1

COMPQ ='N'

On entry: if

COMPQ ='V'

, the matrix

Q_{0}

. The matrix

Q_{0}

is usually the matrix

Q

returned by F08WSF (ZGGHRD).

COMPQ ='N'

, Q is not referenced.

On exit: if

COMPQ ='V'

, Q contains the matrix product

Q Q_{0}

COMPQ ='I'

, Q contains the transformation matrix

Q

14: LDQ – INTEGERInput

On entry: the first dimension of the array Q as declared in the (sub)program from which F08XSF (ZHGEQZ) is called.

Constraints:

if $COMPQ ='V'$ or $'I'$ , $LDQ \geq N$ ;
if $COMPQ ='N'$ , $LDQ \geq 1$ .

15: Z(LDZ, $*$ ) – COMPLEX (KIND=nag_wp) arrayInput/Output

Note: the second dimension of the array Z must be at least

\max (1, N)

COMPZ ='V'

'I'

and at least

1

COMPZ ='N'

On entry: if

COMPZ ='V'

, the matrix

Z_{0}

. The matrix

Z_{0}

is usually the matrix

Z

returned by F08WSF (ZGGHRD).

COMPZ ='N'

, Z is not referenced.

On exit: if

COMPZ ='V'

, Z contains the matrix product

Z Z_{0}

COMPZ ='I'

, Z contains the transformation matrix

Z

16: LDZ – INTEGERInput

On entry: the first dimension of the array Z as declared in the (sub)program from which F08XSF (ZHGEQZ) is called.

Constraints:

if $COMPZ ='V'$ or $'I'$ , $LDZ \geq N$ ;
if $COMPZ ='N'$ , $LDZ \geq 1$ .

17: WORK( $\max (1, LWORK)$ ) – COMPLEX (KIND=nag_wp) arrayWorkspace

On exit: if

INFO = 0

, the real part of

WORK (1)

contains the minimum value of LWORK required for optimal performance.

18: LWORK – INTEGERInput

On entry: the dimension of the array WORK as declared in the (sub)program from which F08XSF (ZHGEQZ) is called.

LWORK = - 1

, a workspace query is assumed; the routine only calculates the minimum size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued.

Constraint:

LWORK \geq \max (1, N)

LWORK = - 1

19: RWORK(N) – REAL (KIND=nag_wp) arrayWorkspace

20: INFO – INTEGEROutput

On exit:

INFO = 0

unless the routine detects an error (see Section 6).

6 Error Indicators and Warnings

Errors or warnings detected by the routine:

$INFO < 0$: If $INFO = - i$ , argument $i$ had an illegal value. An explanatory message is output, and execution of the program is terminated.

$INFO > 0$: If $1 \leq INFO \leq N$ , the $Q Z$ iteration did not converge and the matrix pair $(A, B)$ is not in the generalized Schur form at exit. However, if $INFO < N$ , then the computed $α_{i}$ and $β_{i}$ should be correct for $i = INFO + 1, \dots, N$ .

If $N + 1 \leq INFO \leq 2 \times N$ , the computation of shifts failed and the matrix pair $(A, B)$ is not in the generalized Schur form at exit. However, if $INFO < 2 \times N$ , then the computed $α_{i}$ and $β_{i}$ should be correct for $i = INFO - N + 1, \dots, N$ .

If $INFO > 2 \times N$ , then an unexpected Library error has occurred. Please contact NAG with details of your program.

7 Accuracy

Please consult Section 4.11 of the LAPACK Users' Guide (see Anderson et al. (1999)) and Chapter 6 of Stewart and Sun (1990), for more information.

8 Further Comments

F08XSF (ZHGEQZ) is the fifth step in the solution of the complex generalized eigenvalue problem and is called after F08WSF (ZGGHRD).

The number of floating point operations taken by this routine is proportional to

n^{3}

The real analogue of this routine is F08XEF (DHGEQZ).

9 Example

This example computes the

α

and

β

parameters, which defines the generalized eigenvalues, of the matrix pair

(A, B)

given by

A = (\begin{array}{r} 1.0 + 3.0 i & 1.0 + 4.0 i & 1.0 + 5.0 i & 1.0 + 6.0 i \\ 2.0 + 2.0 i & 4.0 + 3.0 i & 8.0 + 4.0 i & 16.0 + 5.0 i \\ 3.0 + 1.0 i & 9.0 + 2.0 i & 27.0 + 3.0 i & 81.0 + 4.0 i \\ 4.0 + 0.0 i & 16.0 + 1.0 i & 64.0 + 2.0 i & 256.0 + 3.0 i \end{array})

and

B = (\begin{array}{r} 1.0 + 0.0 i & 2.0 + 1.0 i & 3.0 + 2.0 i & 4.0 + 3.0 i \\ 1.0 + 1.0 i & 4.0 + 2.0 i & 9.0 + 3.0 i & 16.0 + 4.0 i \\ 1.0 + 2.0 i & 8.0 + 3.0 i & 27.0 + 4.0 i & 64.0 + 5.0 i \\ 1.0 + 3.0 i & 16.0 + 4.0 i & 81.0 + 5.0 i & 256.0 + 6.0 i \end{array}) .

This requires calls to five routines: F08WVF (ZGGBAL) to balance the matrix, F08ASF (ZGEQRF) to perform the

Q R

factorization of

B

, F08AUF (ZUNMQR) to apply

Q

A

, F08WSF (ZGGHRD) to reduce the matrix pair to the generalized Hessenberg form and F08XSF (ZHGEQZ) to compute the eigenvalues using the

Q Z

algorithm.

NAG Library Routine DocumentF08XSF (ZHGEQZ)

+− Contents

1 Purpose

2 Specification

3 Description

4 References

5 Parameters

6 Error Indicators and Warnings

7 Accuracy

8 Further Comments

9 Example

9.1 Program Text

9.2 Program Data

9.3 Program Results

NAG Library Routine Document

F08XSF (ZHGEQZ)