NAG Library Routine Document

C06PFF

. The plus or minus sign in the argument of the exponential terms in the above definition determine the direction of the transform: a minus sign defines the forward direction and a plus sign defines the backward direction.

(Note the scale factor of

\frac{1}{\sqrt{n_{l}}}

in this definition.)

A call of C06PFF with

DIRECT ='F'

followed by a call with

DIRECT ='B'

will restore the original data.

The data values must be supplied in a one-dimensional complex array using column-major storage ordering of multidimensional data (i.e., with the first subscript

j_{1}

varying most rapidly).

This routine calls C06PRF to perform one-dimensional discrete Fourier transforms. Hence, the routine uses a variant of the fast Fourier transform (FFT) algorithm (see Brigham (1974)) known as the Stockham self-sorting algorithm, which is described in Temperton (1983).

4 References

Brigham E O (1974) The Fast Fourier Transform Prentice–Hall

Temperton C (1983) Self-sorting mixed-radix fast Fourier transforms J. Comput. Phys. 52 1–23

5 Parameters

1: DIRECT – CHARACTER(1)Input

On entry: if the forward transform as defined in Section 3 is to be computed, then DIRECT must be set equal to 'F'.

If the backward transform is to be computed then DIRECT must be set equal to 'B'.

Constraint:

DIRECT ='F'

'B'

2: NDIM – INTEGERInput

On entry:

m

, the number of dimensions (or variables) in the multivariate data.

Constraint:

NDIM \geq 1

3: L – INTEGERInput

On entry:

l

, the index of the variable (or dimension) on which the discrete Fourier transform is to be performed.

Constraint:

1 \leq L \leq NDIM

4: ND(NDIM) – INTEGER arrayInput

On entry: the elements of ND must contain the dimensions of the NDIM variables; that is,

ND (i)

must contain the dimension of the

i

th variable.

Constraints:

$ND (i) \geq 1$ , for $i = 1, 2, \dots, NDIM$ ;
$ND (L)$ must have less than $31$ prime factors (counting repetitions).

5: N – INTEGERInput

On entry:

n

, the total number of data values.

Constraint: N must equal the product of the first NDIM elements of the array ND.

6: X(N) – COMPLEX (KIND=nag_wp) arrayInput/Output

On entry: the complex data values. Data values are stored in X using column-major ordering for storing multidimensional arrays; that is,

z_{j_{1} j_{2} \dots j_{m}}

is stored in

X (1 + j_{1} + n_{1} j_{2} + n_{1} n_{2} j_{3} + \dots)

On exit: the corresponding elements of the computed transform.

7: WORK(LWORK) – COMPLEX (KIND=nag_wp) arrayWorkspace

The workspace requirements as documented for C06PFF may be an overestimate in some implementations.

On exit: the real part of

WORK (1)

contains the minimum workspace required for the current value of N with this implementation.

8: LWORK – INTEGERInput

On entry: the dimension of the array WORK as declared in the (sub)program from which C06PFF is called.

Suggested value:

LWORK \geq N + ND (L) + 15

9: IFAIL – INTEGERInput/Output

On entry: IFAIL must be set to

0

- 1 ​ or ​ 1

. If you are unfamiliar with this parameter you should refer to Section 3.3 in the Essential Introduction for details.

For environments where it might be inappropriate to halt program execution when an error is detected, the value

- 1 ​ or ​ 1

is recommended. If the output of error messages is undesirable, then the value

1

is recommended. Otherwise, if you are not familiar with this parameter, the recommended value is

0

. When the value $- 1 or 1$ is used it is essential to test the value of IFAIL on exit.

On exit:

IFAIL = 0

unless the routine detects an error or a warning has been flagged (see Section 6).

6 Error Indicators and Warnings

If on entry

IFAIL = 0

- 1

, explanatory error messages are output on the current error message unit (as defined by X04AAF).

Errors or warnings detected by the routine:

$IFAIL = 1$

On entry,

NDIM < 1

$IFAIL = 2$

On entry,

L < 1

L > NDIM

$IFAIL = 3$

On entry,

DIRECT \neq'F'

'B'

$IFAIL = 4$

On entry,

at least one of the first NDIM elements of ND is less than

1

$IFAIL = 5$

On entry,

N does not equal the product of the first NDIM elements of ND.

$IFAIL = 6$

On entry,

LWORK is too small. The minimum amount of workspace required is returned in

WORK (1)

$IFAIL = 7$

On entry,

ND (L)

has more than

30

prime factors.

$IFAIL = 8$: An unexpected error has occurred in an internal call. Check all subroutine calls and array dimensions. Seek expert help.

7 Accuracy

Some indication of accuracy can be obtained by performing a subsequent inverse transform and comparing the results with the original sequence (in exact arithmetic they would be identical).

8 Further Comments

The time taken is approximately proportional to

n \times \log n_{l}

, but also depends on the factorization of

n_{l}

. C06PFF is faster if the only prime factors of

n_{l}

are

2

3

5

; and fastest of all if

n_{l}

is a power of

2

9 Example

This example reads in a bivariate sequence of complex data values and prints the discrete Fourier transform of the second variable. It then performs an inverse transform and prints the sequence so obtained, which may be compared with the original data values.

NAG Library Routine DocumentC06PFF

+− Contents

1 Purpose

2 Specification

3 Description

4 References

5 Parameters

6 Error Indicators and Warnings

7 Accuracy

8 Further Comments

9 Example

9.1 Program Text

9.2 Program Data

9.3 Program Results

NAG Library Routine Document

C06PFF