nag_rand_field_1d_generate (g05zpc) (PDF version)
g05 Chapter Contents
g05 Chapter Introduction
NAG Library Manual

NAG Library Function Document

nag_rand_field_1d_generate (g05zpc)

 Contents

    1  Purpose
    7  Accuracy

1  Purpose

nag_rand_field_1d_generate (g05zpc) produces realizations of a stationary Gaussian random field in one dimension, using the circulant embedding method. The square roots of the eigenvalues of the extended covariance matrix (or embedding matrix) need to be input, and can be calculated using nag_rand_field_1d_user_setup (g05zmc) or nag_rand_field_1d_predef_setup (g05znc).

2  Specification

#include <nag.h>
#include <nagg05.h>
void  nag_rand_field_1d_generate (Integer ns, Integer s, Integer m, const double lam[], double rho, Integer state[], double z[], NagError *fail)

3  Description

A one-dimensional random field Zx in  is a function which is random at every point x, so Zx is a random variable for each x. The random field has a mean function μx=𝔼Zx and a symmetric non-negative definite covariance function Cx,y=𝔼Zx-μxZy-μy. Zx is a Gaussian random field if for any choice of n and x1,,xn, the random vector Zx1,,ZxnT follows a multivariate Normal distribution, which would have a mean vector μ~ with entries μ~i=μxi and a covariance matrix C~ with entries C~ij=Cxi,xj. A Gaussian random field Zx is stationary if μx is constant for all x and Cx,y=Cx+a,y+a for all x,y,a and hence we can express the covariance function Cx,y as a function γ of one variable: Cx,y=γx-y. γ is known as a variogram (or more correctly, a semivariogram) and includes the multiplicative factor σ2 representing the variance such that γ0=σ2.
The functions nag_rand_field_1d_user_setup (g05zmc) or nag_rand_field_1d_predef_setup (g05znc), along with nag_rand_field_1d_generate (g05zpc), are used to simulate a one-dimensional stationary Gaussian random field, with mean function zero and variogram γx, over an interval xmin,xmax, using an equally spaced set of N points. The problem reduces to sampling a Normal random vector X of size N, with mean vector zero and a symmetric Toeplitz covariance matrix A. Since A is in general expensive to factorize, a technique known as the circulant embedding method is used. A is embedded into a larger, symmetric circulant matrix B of size M2N-1, which can now be factorized as B=WΛW*=R*R, where W is the Fourier matrix (W* is the complex conjugate of W), Λ is the diagonal matrix containing the eigenvalues of B and R=Λ12W*. B is known as the embedding matrix. The eigenvalues can be calculated by performing a discrete Fourier transform of the first row (or column) of B and multiplying by M, and so only the first row (or column) of B is needed – the whole matrix does not need to be formed.
As long as all of the values of Λ are non-negative (i.e., B is non-negative definite), B is a covariance matrix for a random vector Y, two samples of which can now be simulated from the real and imaginary parts of R*U+iV, where U and V have elements from the standard Normal distribution. Since R*U+iV=WΛ12U+iV, this calculation can be done using a discrete Fourier transform of the vector Λ12U+iV. Two samples of the random vector X can now be recovered by taking the first N elements of each sample of Y – because the original covariance matrix A is embedded in B, X will have the correct distribution.
If B is not non-negative definite, larger embedding matrices B can be tried; however if the size of the matrix would have to be larger than maxm, an approximation procedure is used. See the documentation of nag_rand_field_1d_user_setup (g05zmc) or nag_rand_field_1d_predef_setup (g05znc) for details of the approximation procedure.
nag_rand_field_1d_generate (g05zpc) takes the square roots of the eigenvalues of the embedding matrix B, and its size M, as input and outputs S realizations of the random field in Z.
One of the initialization functions nag_rand_init_repeatable (g05kfc) (for a repeatable sequence if computed sequentially) or nag_rand_init_nonrepeatable (g05kgc) (for a non-repeatable sequence) must be called prior to the first call to nag_rand_field_1d_generate (g05zpc).

4  References

Dietrich C R and Newsam G N (1997) Fast and exact simulation of stationary Gaussian processes through circulant embedding of the covariance matrix SIAM J. Sci. Comput. 18 1088–1107
Schlather M (1999) Introduction to positive definite functions and to unconditional simulation of random fields Technical Report ST 99–10 Lancaster University
Wood A T A and Chan G (1994) Simulation of stationary Gaussian processes in 0,1d Journal of Computational and Graphical Statistics 3(4) 409–432

5  Arguments

1:     ns IntegerInput
On entry: the number of sample points to be generated in realizations of the random field. This must be the same value as supplied to nag_rand_field_1d_user_setup (g05zmc) or nag_rand_field_1d_predef_setup (g05znc) when calculating the eigenvalues of the embedding matrix.
Constraint: ns1.
2:     s IntegerInput
On entry: S, the number of realizations of the random field to simulate.
Constraint: s1.
3:     m IntegerInput
On entry: M, the size of the embedding matrix, as returned by nag_rand_field_1d_user_setup (g05zmc) or nag_rand_field_1d_predef_setup (g05znc).
Constraint: mmax1,2ns-1.
4:     lam[m] const doubleInput
On entry: must contain the square roots of the eigenvalues of the embedding matrix, as returned by nag_rand_field_1d_user_setup (g05zmc) or nag_rand_field_1d_predef_setup (g05znc).
Constraint: lam[i-1]0,i=1,2,,m.
5:     rho doubleInput
On entry: indicates the scaling of the covariance matrix, as returned by nag_rand_field_1d_user_setup (g05zmc) or nag_rand_field_1d_predef_setup (g05znc).
Constraint: 0.0<rho1.0.
6:     state[dim] IntegerCommunication Array
Note: the dimension, dim, of this array is dictated by the requirements of associated functions that must have been previously called. This array MUST be the same array passed as argument state in the previous call to nag_rand_init_repeatable (g05kfc) or nag_rand_init_nonrepeatable (g05kgc).
On entry: contains information on the selected base generator and its current state.
On exit: contains updated information on the state of the generator.
7:     z[ns×s] doubleOutput
On exit: contains the realizations of the random field. The jth realization, for the ns sample points, is stored in z[j-1×ns+i-1], for i=1,2,,ns. The sample points are as returned in xx by nag_rand_field_1d_user_setup (g05zmc) or nag_rand_field_1d_predef_setup (g05znc).
8:     fail NagError *Input/Output
The NAG error argument (see Section 2.7 in How to Use the NAG Library and its Documentation).

6  Error Indicators and Warnings

NE_ALLOC_FAIL
Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_BAD_PARAM
On entry, argument value had an illegal value.
NE_INT
On entry, ns=value.
Constraint: ns1.
On entry, s=value.
Constraint: s1.
NE_INT_2
On entry, m=value and ns=value.
Constraint: mmax1,2×ns-1.
NE_INTERNAL_ERROR
An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.
An unexpected error has been triggered by this function. Please contact NAG.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_INVALID_STATE
On entry, state vector has been corrupted or not initialized.
NE_NEG_ELEMENT
On entry, at least one element of lam was negative.
Constraint: all elements of lam must be non-negative.
NE_NO_LICENCE
Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.
NE_REAL
On entry, rho=value.
Constraint: 0.0rho1.0.

7  Accuracy

Not applicable.

8  Parallelism and Performance

nag_rand_field_1d_generate (g05zpc) is threaded by NAG for parallel execution in multithreaded implementations of the NAG Library.
nag_rand_field_1d_generate (g05zpc) makes calls to BLAS and/or LAPACK routines, which may be threaded within the vendor library used by this implementation. Consult the documentation for the vendor library for further information.
Please consult the x06 Chapter Introduction for information on how to control and interrogate the OpenMP environment used within this function. Please also consult the Users' Note for your implementation for any additional implementation-specific information.

9  Further Comments

Because samples are generated in pairs, calling this function k times, with s=s, say, will generate a different sequence of numbers than calling the function once with s=ks, unless s is even.

10  Example

This example calls nag_rand_field_1d_generate (g05zpc) to generate 5 realizations of a random field on 8 sample points using eigenvalues calculated by nag_rand_field_1d_predef_setup (g05znc) for a symmetric stable variogram.

10.1  Program Text

Program Text (g05zpce.c)

10.2  Program Data

Program Data (g05zpce.d)

10.3  Program Results

Program Results (g05zpce.r)


nag_rand_field_1d_generate (g05zpc) (PDF version)
g05 Chapter Contents
g05 Chapter Introduction
NAG Library Manual

© The Numerical Algorithms Group Ltd, Oxford, UK. 2016