NAG Library ManualKeyword Search:

NAG Library Function Document

nag_lars (g02mac)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Further Comments

▸▿ 9 Example

9.1 Program Text

9.2 Program Data

9.3 Program Results

1 Purpose

nag_lars (g02mac) performs Least Angle Regression (LARS), forward stagewise linear regression or Least Absolute Shrinkage and Selection Operator (LASSO).

2 Specification

#include <nag.h>

#include <nagg02.h>

void

nag_lars (Nag_LARSModelType mtype, Nag_LARSPreProcess pred, Nag_LARSPreProcess prey, Integer n, Integer m, const double d[], Integer pdd, const Integer isx[], const double y[], Integer mnstep, Integer *ip, Integer *nstep, double b[], Integer pdb, double fitsum[], const double ropt[], Integer lropt, NagError *fail)

3 Description

nag_lars (g02mac) implements the LARS algorithm of Efron et al. (2004) as well as the modifications needed to perform forward stagewise linear regression and fit LASSO and positive LASSO models.

Given a vector of

n

observed values,

y = \{y_{i} : i = 1, 2, \dots, n\}

and an

n \times p

design matrix

X

, where the

j

th column of

X

, denoted

x_{j}

, is a vector of length

n

representing the

j

th independent variable

x_{j}

, standardized such that

\sum_{i = 1}^{n} x_{i j} = 0

, and

\sum_{i = 1}^{n} x_{i j}^{2} = 1

and a set of model parameters

β

to be estimated from the observed values, the LARS algorithm can be summarised as:

1.	Set $k = 1$ and all coefficients to zero, that is $β = 0$ .
2.	Find the variable most correlated with $y$ , say $x_{j_{1}}$ . Add $x_{j_{1}}$ to the ‘most correlated’ set $A$ . If $p = 1$ go to 8.
3.	Take the largest possible step in the direction of $x_{j_{1}}$ (i.e., increase the magnitude of $β_{j_{1}}$ ) until some other variable, say $x_{j_{2}}$ , has the same correlation with the current residual, $y - x_{j_{1}} β_{j_{1}}$ .
4.	Increment $k$ and add $x_{j_{k}}$ to $A$ .
5.	If $\|A\| = p$ go to 8.
6.	Proceed in the ‘least angle direction’, that is, the direction which is equiangular between all variables in $A$ , altering the magnitude of the parameter estimates of those variables in $A$ , until the $k$ th variable, $x_{j_{k}}$ , has the same correlation with the current residual.
7.	Go to 4.
8.	Let $K = k$ .

As well as being a model selection process in its own right, with a small number of modifications the LARS algorithm can be used to fit the LASSO model of Tibshirani (1996), a positive LASSO model, where the independent variables enter the model in their defined direction (i.e.,

β_{k j} \geq 0

), forward stagewise linear regression (Hastie et al. (2001)) and forward selection (Weisberg (1985)). Details of the required modifications in each of these cases are given in Efron et al. (2004).

The LASSO model of Tibshirani (1996) is given by

\underset{α, β_{k} \in ℝ^{p}}{minimize} {‖y - α - X^{T} β_{k}‖}^{2} subject to {‖β_{k}‖}_{1} \leq t_{k}

for all values of

t_{k}

, where

α = \bar{y} = n^{- 1} \sum_{i = 1}^{n} y_{i}

. The positive LASSO model is the same as the standard LASSO model, given above, with the added constraint that

β_{k j} \geq 0, j = 1, 2, \dots, p .

Unlike the standard LARS algorithm, when fitting either of the LASSO models, variables can be dropped as well as added to the set

A

. Therefore the total number of steps

K

is no longer bounded by

p

Forward stagewise linear regression is an iterative procedure of the form:

Initialize

k = 1

and the vector of residuals

r_{0} = y - α

For each

j = 1, 2, \dots, p

calculate

c_{j} = x_{j}^{T} r_{k - 1}

. The value

c_{j}

is therefore proportional to the correlation between the

j

th independent variable and the vector of previous residual values,

r_{k}

Calculate

j_{k} = \underset{j}{argmax} |c_{j}|

, the value of

j

with the largest absolute value of

c_{j}

|c_{j_{k}}| < ε

then go to 7.

Update the residual values, with

r_{k} = r_{k - 1} + δ ​ ​ sign (c_{j_{k}}) x_{j_{k}}

where

δ

is a small constant and

sign (c_{j_{k}}) = - 1

when

c_{j_{k}} < 0

and

1

otherwise.

Increment

k

and go to 2.

Set

K = k

If the largest possible step were to be taken, that is

δ = |c_{j_{k}}|

then forward stagewise linear regression reverts to the standard forward selection method as implemented in nag_step_regsn (g02eec).

The LARS procedure results in

K

models, one for each step of the fitting process. In order to aid in choosing which is the most suitable Efron et al. (2004) introduced a

C_{p}

-type statistic given by

C_{p}^{(k)} = \frac{{‖y - X^{T} β_{k}‖}^{2}}{σ^{2}} - n + 2 ν_{k},

where

ν_{k}

is the approximate degrees of freedom for the

k

th step and

σ^{2} = \frac{n - y^{T} y}{ν_{K}} .

One way of choosing a model is therefore to take the one with the smallest value of

C_{p}^{(k)}

4 References

Efron B, Hastie T, Johnstone I and Tibshirani R (2004) Least Angle Regression The Annals of Statistics (Volume 32) 2 407–499

Hastie T, Tibshirani R and Friedman J (2001) The Elements of Statistical Learning: Data Mining, Inference and Prediction Springer (New York)

Tibshirani R (1996) Regression Shrinkage and Selection via the Lasso Journal of the Royal Statistics Society, Series B (Methodological) (Volume 58) 1 267–288

Weisberg S (1985) Applied Linear Regression Wiley

5 Arguments

1: $mtype$ – Nag_LARSModelTypeInput

On entry: indicates the type of model to fit.

$mtype = Nag_LARS_LAR$: LARS is performed.
$mtype = Nag_LARS_ForwardStagewise$: Forward linear stagewise regression is performed.
$mtype = Nag_LARS_LASSO$: LASSO model is fit.
$mtype = Nag_LARS_PositiveLASSO$: A positive LASSO model is fit.

Constraint:

mtype = Nag_LARS_LAR

Nag_LARS_ForwardStagewise

Nag_LARS_LASSO

Nag_LARS_PositiveLASSO

2: $pred$ – Nag_LARSPreProcessInput

On entry: indicates the type of data preprocessing to perform on the independent variables supplied in d to comply with the standardized form of the design matrix.

$pred = Nag_LARS_None$: No preprocessing is performed.
$pred = Nag_LARS_Centered$: Each of the independent variables, $x_{j}$ , for $j = 1, 2, \dots, p$ , are mean centred prior to fitting the model. The means of the independent variables, $\bar{x}$ , are returned in b, with ${\bar{x}}_{j} = b [(nstep + 1) \times pdb + j - 1]$ , for $j = 1, 2, \dots, p$ .
$pred = Nag_LARS_Normalized$: Each independent variable is normalized, with the $j$ th variable scaled by $1 / \sqrt{x_{j}^{T} x_{j}}$ . The scaling factor used by variable $j$ is returned in $b [nstep \times pdb + j - 1]$ .
$pred = Nag_LARS_CenteredNormalized$: As $pred = Nag_LARS_Centered$ and $Nag_LARS_Normalized$ , all of the independent variables are mean centred prior to being normalized.

Suggested value:

pred = Nag_LARS_CenteredNormalized

Constraint:

pred = Nag_LARS_None

Nag_LARS_Centered

Nag_LARS_Normalized

Nag_LARS_CenteredNormalized

3: $prey$ – Nag_LARSPreProcessInput

On entry: indicates the type of data preprocessing to perform on the dependent variable supplied in y.

$prey = Nag_LARS_None$: No preprocessing is performed, this is equivalent to setting $α = 0$ .
$prey = Nag_LARS_Centered$: The dependent variable, $y$ , is mean centred prior to fitting the model, so $α = \bar{y}$ . Which is equivalent to fitting a non-penalized intercept to the model and the degrees of freedom etc. are adjusted accordingly.

The value of

α

used is returned in

fitsum [nstep \times 6]

Suggested value:

prey = Nag_LARS_Centered

Constraint:

prey = Nag_LARS_None

Nag_LARS_Centered

4: $n$ – IntegerInput

On entry:

n

, the number of observations.

Constraint:

n \geq 1

5: $m$ – IntegerInput

On entry:

m

, the total number of independent variables.

Constraint:

m \geq 1

6: $d [\dim]$ – const doubleInput

Note: the dimension, dim, of the array d must be at least

pdd \times m

On entry:

D

, the data, which along with pred and isx, defines the design matrix

X

. The

i

th observation for the

j

th variable must be supplied in

d [(j - 1) \times pdd + i - 1]

, for

i = 1, 2, \dots, n

and

j = 1, 2, \dots, m

7: $pdd$ – IntegerInput

On entry: the stride separating row elements in the two-dimensional data stored in the array d.

Constraint:

pdd \geq n

8: $isx [m]$ – const IntegerInput

On entry: indicates which independent variables from d will be included in the design matrix,

X

If isx is NULL, all variables are included in the design matrix.

Otherwise, for

j = 1, 2, \dots, m

when

isx [j - 1]

must be set as follows:

$isx [j - 1] = 1$: To indicate that the $j$ th variable, as supplied in d, is included in the design matrix;
$isx [j - 1] = 0$: To indicated that the $j$ th variable, as supplied in d, is not included in the design matrix;

and

p = \sum_{j = 1}^{m} isx [j - 1]

Constraint:

isx [j - 1] = 0

1

and at least one value of

isx [j - 1] \neq 0

, for

j = 1, 2, \dots, m

9: $y [n]$ – const doubleInput

On entry:

y

, the observations on the dependent variable.

10: $mnstep$ – IntegerInput

On entry: the maximum number of steps to carry out in the model fitting process.

mtype = Nag_LARS_LAR

, the maximum number of steps the algorithm will take is

\min (p, n)

prey = Nag_LARS_None

, otherwise

\min (p, n - 1)

mtype = Nag_LARS_ForwardStagewise

, the maximum number of steps the algorithm will take is likely to be several orders of magnitude more and is no longer bound by

p

n

mtype = Nag_LARS_LASSO

Nag_LARS_PositiveLASSO

, the maximum number of steps the algorithm will take lies somewhere between that of the LARS and forward linear stagewise regression, again it is no longer bound by

p

n

Constraint:

mnstep \geq 1

11: $ip$ – Integer *Output

On exit:

p

, number of parameter estimates.

If isx is NULL,

p = m

, i.e., the number of variables in d.

Otherwise

p

is the number of nonzero values in isx.

12: $nstep$ – Integer *Output

On exit:

K

, the actual number of steps carried out in the model fitting process.

13: $b [\dim]$ – doubleOutput

Note: the dimension, dim, of the array b must be at least

pdb \times (mnstep + 2)

On exit:

β

the parameter estimates, with

b [(k - 1) \times pdb + j - 1] = β_{k j}

, the parameter estimate for the

j

th variable,

j = 1, 2, \dots, p

at the

k

th step of the model fitting process,

k = 1, 2, \dots, nstep

By default, when

pred = Nag_LARS_Normalized

Nag_LARS_CenteredNormalized

the parameter estimates are rescaled prior to being returned. If the parameter estimates are required on the normalized scale, then this can be overridden via ropt.

The values held in the remaining part of b depend on the type of preprocessing performed.

If $pred = Nag_LARS_None$ ,: $\begin{array}{l} b [nstep \times pdb + j - 1] & = & 1 \\ b [(nstep + 1) \times pdb + j - 1] & = & 0 \end{array}$
If $pred = Nag_LARS_Centered$ ,: $\begin{array}{l} b [nstep \times pdb + j - 1] & = & 1 \\ b [(nstep + 1) \times pdb + j - 1] & = & {\bar{x}}_{j} \end{array}$
If $pred = Nag_LARS_Normalized$ ,: $\begin{array}{l} b [nstep \times pdb + j - 1] & = & 1 / \sqrt{x_{j}^{T} x_{j}} \\ b [(nstep + 1) \times pdb + j - 1] & = & 0 \end{array}$
If $pred = Nag_LARS_CenteredNormalized$ ,: $\begin{array}{l} b [nstep \times pdb + j - 1] & = & 1 / \sqrt{{(x_{j} - {\bar{x}}_{j})}^{T} (x_{j} - {\bar{x}}_{j})} \\ b [(nstep + 1) \times pdb + j - 1] & = & {\bar{x}}_{j} \end{array}$

for

j = 1, 2, \dots, p

14: $pdb$ – IntegerInput

On entry: the stride separating row elements in the two-dimensional data stored in the array b.

Constraint:

pdb \geq p

, where

p

is the number of parameter estimates as described in ip.

15: $fitsum [6 \times (mnstep + 1)]$ – doubleOutput

On exit: summaries of the model fitting process. When

k = 1, 2, \dots, nstep

$fitsum [(k - 1) \times 6]$: ${‖β_{k}‖}_{1}$ , the sum of the absolute values of the parameter estimates for the $k$ th step of the modelling fitting process. If $pred = Nag_LARS_Normalized$ or $Nag_LARS_CenteredNormalized$ , the scaled parameter estimates are used in the summation.
$fitsum [(k - 1) \times 6 + 1]$: ${RSS}_{k}$ , the residual sums of squares for the $k$ th step, where ${RSS}_{k} = {‖y - X^{T} β_{k}‖}^{2}$ .
$fitsum [(k - 1) \times 6 + 2]$: $ν_{k}$ , approximate degrees of freedom for the $k$ th step.
$fitsum [(k - 1) \times 6 + 3]$: $C_{p}^{(k)}$ , a $C_{p}$ -type statistic for the $k$ th step, where $C_{p}^{(k)} = \frac{{RSS}_{k}}{σ^{2}} - n + 2 ν_{k}$ .
$fitsum [(k - 1) \times 6 + 4]$: ${\hat{C}}_{k}$ , correlation between the residual at step $k - 1$ and the most correlated variable not yet in the active set $A$ , where the residual at step $0$ is $y$ .
$fitsum [(k - 1) \times 6 + 5]$: ${\hat{γ}}_{k}$ , the step size used at step $k$ .

In addition

$fitsum [nstep \times 6]$: $α$ , with $α = \bar{y}$ if $prey = Nag_LARS_Centered$ and $0$ otherwise.
$fitsum [nstep \times 6 + 1]$: ${RSS}_{0}$ , the residual sums of squares for the null model, where ${RSS}_{0} = y^{T} y$ when $prey = Nag_LARS_None$ and ${RSS}_{0} = {(y - \bar{y})}^{T} (y - \bar{y})$ otherwise.
$fitsum [nstep \times 6 + 2]$: $ν_{0}$ , the degrees of freedom for the null model, where $ν_{0} = 0$ if $prey = Nag_LARS_None$ and $ν_{0} = 1$ otherwise.
$fitsum [nstep \times 6 + 3]$: $C_{p}^{(0)}$ , a $C_{p}$ -type statistic for the null model, where $C_{p}^{(0)} = \frac{{RSS}_{0}}{σ^{2}} - n + 2 ν_{0}$ .
$fitsum [nstep \times 6 + 4]$: $σ^{2}$ , where $σ^{2} = \frac{n - {RSS}_{K}}{ν_{K}}$ and $K = nstep$ .

Although the

C_{p}

statistics described above are returned when

fail . code =

NW_LIMIT_REACHED they may not be meaningful due to the estimate

σ^{2}

not being based on the saturated model.

16: $ropt [lropt]$ – const doubleInput

On entry: optional parameters to control various aspects of the LARS algorithm.

The default value will be used for

ropt [i - 1]

lropt < i

, therefore setting

lropt = 0

will use the default values for all optional arguments and ropt need not be set and may be NULL. The default value will also be used if an invalid value is supplied for a particular argument, for example, setting

ropt [i - 1] = - 1

will use the default value for argument

i

$ropt [0]$: The minimum step size that will be taken.
Default is $100 \times eps$ is used, where $eps$ is the machine precision returned by nag_machine_precision (X02AJC).
$ropt [1]$: General tolerance, used amongst other things, for comparing correlations.
Default is $ropt [0]$ .
$ropt [2]$: If set to $1$ , parameter estimates are rescaled before being returned.
If set to $0$ , no rescaling is performed.

This argument has no effect when $pred = Nag_LARS_None$ or $Nag_LARS_Centered$ .

Default is for the parameter estimates to be rescaled.
$ropt [3]$: If set to $1$ , it is assumed that the model contains an intercept during the model fitting process and when calculating the degrees of freedom.
If set to $0$ , no intercept is assumed.

This has no effect on the amount of preprocessing performed on y.

Default is to treat the model as having an intercept when $prey = Nag_LARS_Centered$ and as not having an intercept when $prey = Nag_LARS_None$ .
$ropt [4]$: As implemented, the LARS algorithm can either work directly with $y$ and $X$ , or it can work with the cross-product matrices, $X^{T} y$ and $X^{T} X$ . In most cases it is more efficient to work with the cross-product matrices. This flag allows you direct control over which method is used, however, the default value will usually be the best choice.
If $ropt [4] = 1$ , $y$ and $X$ are worked with directly.

If $ropt [4] = 0$ , the cross-product matrices are used.

Default is $1$ when $p \geq 500$ and $n < p$ and $0$ otherwise.

Constraints:

$ropt [0] > machine precision$ ;
$ropt [1] > machine precision$ ;
$ropt [2] = 0$ or $1$ ;
$ropt [3] = 0$ or $1$ ;
$ropt [4] = 0$ or $1$ .

17: $lropt$ – IntegerInput

On entry: length of the options array ropt.

Constraint:

0 \leq lropt \leq 5

18: $fail$ – NagError *Input/Output

The NAG error argument (see Section 2.7 in How to Use the NAG Library and its Documentation).

6 Error Indicators and Warnings

NE_ALLOC_FAIL: Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_ARRAY_SIZE: On entry, $lropt = 〈value〉$ .
Constraint: $0 \leq lropt \leq 5$ .

On entry, $pdb = 〈value〉$ and $m = 〈value〉$ .
Constraint: if isx is NULL then $pdb \geq m$ .

On entry, $pdb = 〈value〉$ and $p = 〈value〉$ .
Constraint: if isx is not NULL then $pdb \geq p$ .

On entry, $pdd = 〈value〉$ and $n = 〈value〉$ .
Constraint: $pdd \geq n$ .
NE_BAD_PARAM: On entry, argument $〈value〉$ had an illegal value.
NE_INT: On entry, $m = 〈value〉$ .
Constraint: $m \geq 1$ .

On entry, $n = 〈value〉$ .
Constraint: $n \geq 1$ .
NE_INT_ARRAY: On entry, all values of isx are zero.
Constraint: at least one value of isx must be nonzero.

On entry, $isx [〈value〉] = 〈value〉$ .
Constraint: $isx [i] = 0$ or $1$ for all $i$ .
NE_INTERNAL_ERROR: An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.

An unexpected error has been triggered by this function. Please contact NAG.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_MAX_STEP: On entry, $mnstep = 〈value〉$ .
Constraint: $mnstep \geq 1$ .
NE_NO_LICENCE: Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.
NW_LIMIT_REACHED: Fitting process did not finish in mnstep steps. Try increasing the size of mnstep and supplying larger output arrays.
All output is returned as documented, up to step mnstep, however, $σ$ and the $C_{p}$ statistics may not be meaningful.
NW_OVERFLOW_WARN: $ν_{K} = n$ , therefore $σ$ has been set to a large value. Output is returned as documented.

$σ^{2}$ is approximately zero and hence the $C_{p}$ -type criterion cannot be calculated. All other output is returned as documented.
NW_POTENTIAL_PROBLEM: Degenerate model, no variables added and $nstep = 0$ . Output is returned as documented.

7 Accuracy

Not applicable.

8 Further Comments

nag_lars (g02mac) returns the parameter estimates at various points along the solution path of a LARS, LASSO or stagewise regression analysis. If the solution is required at a different set of points, for example when performing cross-validation, then nag_lars_param (g02mcc) can be used.

For datasets with a large number of observations,

n

, it may be impractical to store the full

X

matrix in memory in one go. In such instances the cross-product matrices

X^{T} y

and

X^{T} X

can be calculated, using for example, multiple calls to nag_sum_sqs (g02buc) and nag_sum_sqs_combine (g02bzc), and nag_lars_xtx (g02mbc) called to perform the analysis.

The amount of workspace used by nag_lars (g02mac) depends on whether the cross-product matrices are being used internally (as controlled by ropt). If the cross-product matrices are being used then nag_lars (g02mac) internally allocates approximately

2 p^{2} + 4 p + \max (n p)

elements of real storage compared to

p^{2} + 3 p + \max (n p) + 2 n + n \times p

elements when

X

and

y

are used directly. In both cases approximately

5 p

elements of integer storage are also used. If a forward linear stagewise analysis is performed than an additional

p^{2} + 5 p

elements of real storage are required.

9 Example

This example performs a LARS on a simulated dataset with

20

observations and

6

independent variables.

This example plot shows the regression coefficients (

β_{k}

) plotted against the scaled absolute sum of the parameter estimates (

{‖β_{k}‖}_{1}

nag_lars (g02mac) (PDF version)

g02 Chapter Contents

g02 Chapter Introduction

NAG Library Manual

NAG Library Function Documentnag_lars (g02mac)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Further Comments

9 Example

9.1 Program Text

9.2 Program Data

9.3 Program Results

NAG Library Function Document

nag_lars (g02mac)