nag_real_symm_sparse_eigensystem_option (f12fdc) : NAG Library, Mark 26

nag_real_symm_sparse_eigensystem_option (f12fdc) is an option setting function in a suite of functions consisting of nag_real_symm_sparse_eigensystem_init (f12fac), nag_real_symm_sparse_eigensystem_iter (f12fbc), nag_real_symm_sparse_eigensystem_sol (f12fcc), nag_real_symm_sparse_eigensystem_option (f12fdc) and nag_real_symm_sparse_eigensystem_monit (f12fec), and may be used to supply individual optional parameters to nag_real_symm_sparse_eigensystem_iter (f12fbc) and nag_real_symm_sparse_eigensystem_sol (f12fcc). The initialization function nag_real_symm_sparse_eigensystem_init (f12fac) must have been called prior to calling nag_real_symm_sparse_eigensystem_option (f12fdc).

2 Specification

3 Description

nag_real_symm_sparse_eigensystem_option (f12fdc) may be used to supply values for optional parameters to nag_real_symm_sparse_eigensystem_iter (f12fbc) and nag_real_symm_sparse_eigensystem_sol (f12fcc). It is only necessary to call nag_real_symm_sparse_eigensystem_option (f12fdc) for those arguments whose values are to be different from their default values. One call to nag_real_symm_sparse_eigensystem_option (f12fdc) sets one argument value.

Each optional parameter is defined by a single character string consisting of one or more items. The items associated with a given option must be separated by spaces, or equals signs

[=]

. Alphabetic characters may be upper or lower case. The string

'Iteration Limit = 500'

is an example of a string used to set an optional parameter. For each option the string contains one or more of the following items:

–	a mandatory keyword;
–	a phrase that qualifies the keyword;
–	a number that specifies an Integer or double value. Such numbers may be up to $16$ contiguous characters in C's d or g format.

nag_real_symm_sparse_eigensystem_option (f12fdc) does not have an equivalent function from the ARPACK package which passes options by directly setting values to scalar arguments or to specific elements of array arguments. nag_real_symm_sparse_eigensystem_option (f12fdc) is intended to make the passing of options more transparent and follows the same principle as the single option setting functions in Chapter e04.

The setup function nag_real_symm_sparse_eigensystem_init (f12fac) must be called prior to the first call to nag_real_symm_sparse_eigensystem_option (f12fdc) and all calls to nag_real_symm_sparse_eigensystem_option (f12fdc) must precede the first call to nag_real_symm_sparse_eigensystem_iter (f12fbc), the reverse communication iterative solver.

A complete list of optional parameters, their abbreviations, synonyms and default values is given in Section 11.

4 References

Lehoucq R B (2001) Implicitly restarted Arnoldi methods and subspace iteration SIAM Journal on Matrix Analysis and Applications 23 551–562

Lehoucq R B and Scott J A (1996) An evaluation of software for computing eigenvalues of sparse nonsymmetric matrices Preprint MCS-P547-1195 Argonne National Laboratory

Lehoucq R B and Sorensen D C (1996) Deflation techniques for an implicitly restarted Arnoldi iteration SIAM Journal on Matrix Analysis and Applications 17 789–821

Lehoucq R B, Sorensen D C and Yang C (1998) ARPACK Users' Guide: Solution of Large-scale Eigenvalue Problems with Implicitly Restarted Arnoldi Methods SIAM, Philidelphia

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

nag_real_symm_sparse_eigensystem_option (f12fdc) is not threaded in any implementation.

9 Further Comments

10 Example

This example solves

A x = λ B x

Shifted Inverse

mode, where

A

and

B

are obtained from the standard central difference discretization of the one-dimensional Laplacian operator

\frac{\partial^{2} u}{\partial x^{2}}

[0, 1]

, with zero Dirichlet boundary conditions. Data is passed to and from the reverse communication function nag_real_symm_sparse_eigensystem_iter (f12fbc) using pointers to the communication array.

10.1 Program Text

10.2 Program Data

10.3 Program Results

11 Optional Parameters

Several optional parameters for the computational functions nag_real_symm_sparse_eigensystem_iter (f12fbc) and nag_real_symm_sparse_eigensystem_sol (f12fcc) define choices in the problem specification or the algorithm logic. In order to reduce the number of formal arguments of nag_real_symm_sparse_eigensystem_iter (f12fbc) and nag_real_symm_sparse_eigensystem_sol (f12fcc) these optional parameters have associated default values that are appropriate for most problems. Therefore, you need only specify those optional parameters whose values are to be different from their default values.

The remainder of this section can be skipped if you wish to use the default values for all optional parameters.

The following is a list of the optional parameters available. A full description of each optional parameter is provided in Section 11.1.

Optional parameters may be specified by calling nag_real_symm_sparse_eigensystem_option (f12fdc) before a call to nag_real_symm_sparse_eigensystem_iter (f12fbc), but after a call to nag_real_symm_sparse_eigensystem_init (f12fac). One call is necessary for each optional parameter.

All optional parameters you do not specify are set to their default values. Optional parameters you do specify are unaltered by nag_real_symm_sparse_eigensystem_iter (f12fbc) and nag_real_symm_sparse_eigensystem_sol (f12fcc) (unless they define invalid values) and so remain in effect for subsequent calls unless you alter them.

11.1 Description of the Optional Parameters

For each option, we give a summary line, a description of the optional parameter and details of constraints.

The summary line contains:

Keywords and character values are case and white space insensitive.

Optional parameters used to specify files (e.g.,

Advisory

and

Monitoring

) have type Nag_FileID. This ID value must either be set to

0

(the default value) in which case there will be no output, or will be as returned by a call of nag_open_file (x04acc).

(See Section 2.3.1.1 in How to Use the NAG Library and its Documentation for further information on NAG data types.)

Advisory messages are output to Nag_FileID

Advisory

during the solution of the problem.

This special keyword may be used to reset all optional parameters to their default values.

During the Lanczos iterative process, shifts are applied internally as part of the implicit restarting scheme. The shift strategy used by default and selected by the

Exact Shifts

is strongly recommended over the alternative

Supplied Shifts

(see Lehoucq et al. (1998) for details of shift strategies).

Exact Shifts

are used then these are computed internally by the algorithm in the implicit restarting scheme.

Supplied Shifts

are used then, during the Lanczos iterative process, you must supply shifts through array arguments of nag_real_symm_sparse_eigensystem_iter (f12fbc) when nag_real_symm_sparse_eigensystem_iter (f12fbc) returns with

irevcm = 3

; the real and imaginary parts of the shifts are supplied in y and mx respectively. This option should only be used if you are an experienced user since this requires some algorithmic knowledge and because more operations are usually required than for the implicit shift scheme. Details on the use of explicit shifts and further references on shift strategies are available in Lehoucq et al. (1998).

The limit on the number of Lanczos iterations that can be performed before nag_real_symm_sparse_eigensystem_iter (f12fbc) exits. If not all requested eigenvalues have converged to within

Tolerance

and the number of Lanczos iterations has reached this limit then nag_real_symm_sparse_eigensystem_iter (f12fbc) exits with an error; nag_real_symm_sparse_eigensystem_sol (f12fcc) can still be called subsequently to return the number of converged eigenvalues, the converged eigenvalues and, if requested, the corresponding eigenvectors.

The Lanczos iterative method converges on a number of eigenvalues with given properties. The default is for nag_real_symm_sparse_eigensystem_iter (f12fbc) to compute the eigenvalues of largest magnitude using

Largest Magnitude

. Alternatively, eigenvalues may be chosen which have

Largest Algebraic

part,

Smallest Magnitude

, or

Smallest Algebraic

part; or eigenvalues which are from

Both Ends

of the algebraic spectrum.

Note that these options select the eigenvalue properties for eigenvalues of

OP

(and

B

for

Generalized

problems), the linear operator determined by the computational mode and problem type.

Normally each optional parameter specification is not printed to

Advisory

as it is supplied. Optional parameter

List

may be used to enable printing and optional parameter

Nolist

may be used to suppress the printing.

(See Section 2.3.1.1 in How to Use the NAG Library and its Documentation for further information on NAG data types.)

Unless

Monitoring

is set to

- 1

(the default), monitoring information is output to Nag_FileID

Monitoring

during the solution of each problem; this may be the same as

Advisory

. The type of information produced is dependent on the value of

Print Level

, see the description of the optional parameter

Print Level

in this section for details of the information produced. Please see nag_open_file (x04acc) to associate a file with a given Nag_FileID.

This controls the amount of printing produced by nag_real_symm_sparse_eigensystem_option (f12fdc) as follows.

$= 0$	No output except error messages. If you want to suppress all output, set $Print Level = 0$ .
$> 0$	The set of selected options.
$= 2$	Problem and timing statistics on final exit from nag_real_symm_sparse_eigensystem_iter (f12fbc).
$\geq 5$	A single line of summary output at each Lanczos iteration.
$\geq 10$	If $Monitoring$ is set, then at each iteration, the length and additional steps of the current Lanczos factorization and the number of converged Ritz values; during re-orthogonalization, the norm of initial/restarted starting vector; on a final Lanczos iteration, the number of update iterations taken, the number of converged eigenvalues, the converged eigenvalues and their Ritz estimates.
$\geq 20$	Problem and timing statistics on final exit from nag_real_symm_sparse_eigensystem_iter (f12fbc). If $Monitoring$ is set, then at each iteration, the number of shifts being applied, the eigenvalues and estimates of the symmetric tridiagonal matrix $H$ , the size of the Lanczos basis, the wanted Ritz values and associated Ritz estimates and the shifts applied; vector norms prior to and following re-orthogonalization.
$\geq 30$	If $Monitoring$ is set, then on final iteration, the norm of the residual; when computing the Schur form, the eigenvalues and Ritz estimates both before and after sorting; for each iteration, the norm of residual for compressed factorization and the symmetric tridiagonal matrix $H$ ; during re-orthogonalization, the initial/restarted starting vector; during the Lanczos iteration loop, a restart is flagged and the number of the residual requiring iterative refinement; while applying shifts, some indices.
$\geq 40$	If $Monitoring$ is set, then during the Lanczos iteration loop, the Lanczos vector number and norm of the current residual; while applying shifts, key measures of progress and the order of $H$ ; while computing eigenvalues of $H$ , the last rows of the Schur and eigenvector matrices; when computing implicit shifts, the eigenvalues and Ritz estimates of $H$ .
$\geq 50$	If $Monitoring$ is set, then during Lanczos iteration loop: norms of key components and the active column of $H$ , norms of residuals during iterative refinement, the final symmetric tridiagonal matrix $H$ ; while applying shifts: number of shifts, shift values, block indices, updated tridiagonal matrix $H$ ; while computing eigenvalues of $H$ : the diagonals of $H$ , the computed eigenvalues and Ritz estimates.

Note that setting

Print Level \geq 30

can result in very lengthy

Monitoring

output.

Note that setting

Print Level \geq 30

can result in very lengthy

Monitoring

output.

To begin the Lanczos iterative process, nag_real_symm_sparse_eigensystem_iter (f12fbc) requires an initial residual vector. By default nag_real_symm_sparse_eigensystem_iter (f12fbc) provides its own random initial residual vector; this option can also be set using optional parameter

Random Residual

. Alternatively, you can supply an initial residual vector (perhaps from a previous computation) to nag_real_symm_sparse_eigensystem_iter (f12fbc) through the array argument resid; this option can be set using optional parameter

Initial Residual

These options define the computational mode which in turn defines the form of operation

OP (x)

to be performed when nag_real_symm_sparse_eigensystem_iter (f12fbc) returns with

irevcm = - 1

1

and the matrix-vector product

B x

when nag_real_symm_sparse_eigensystem_iter (f12fbc) returns with

irevcm = 2

Given a

Standard

eigenvalue problem in the form

A x = λ x

then the following modes are available with the appropriate operator

OP (x)

$Regular$	$OP = A$
$Shifted Inverse$	$OP = {(A - σ I)}^{- 1}$ where $σ$ is real

Given a

Generalized

eigenvalue problem in the form

A x = λ B x

then the following modes are available with the appropriate operator

OP (x)

$Regular Inverse$	$OP = B^{- 1} A$
$Shifted Inverse$	$OP = {(A - σ B)}^{- 1} B$ , where $σ$ is real
$Buckling$	$OP = {(B - σ A)}^{- 1} A$ , where $σ$ is real
$Cayley$	$OP = {(A - σ B)}^{- 1} (A + σ B)$ , where $σ$ is real

The problem to be solved is either a standard eigenvalue problem,

A x = λ x

, or a generalized eigenvalue problem,

A x = λ B x

. The optional parameter

Standard

should be used when a standard eigenvalue problem is being solved and the optional parameter

Generalized

should be used when a generalized eigenvalue problem is being solved.

An approximate eigenvalue has deemed to have converged when the corresponding Ritz estimate is within

Tolerance

relative to the magnitude of the eigenvalue.

The function nag_real_symm_sparse_eigensystem_sol (f12fcc) can optionally compute the Schur vectors and/or the eigenvectors corresponding to the converged eigenvalues. To turn off computation of any vectors the option

Vectors = NONE

should be set. To compute only the Schur vectors (at very little extra cost), the option

Vectors = SCHUR

should be set and these will be returned in the array argument v of nag_real_symm_sparse_eigensystem_sol (f12fcc). To compute the eigenvectors (Ritz vectors) corresponding to the eigenvalue estimates, the option

Vectors = RITZ

should be set and these will be returned in the array argument z of nag_real_symm_sparse_eigensystem_sol (f12fcc), if z is set equal to v (as in Section 10) then the Schur vectors in v are overwritten by the eigenvectors computed by nag_real_symm_sparse_eigensystem_sol (f12fcc).

NAG Library Function Document

nag_real_symm_sparse_eigensystem_option (f12fdc)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

11 Optional Parameters

11.1 Description of the Optional Parameters

NAG Library Function Documentnag_real_symm_sparse_eigensystem_option (f12fdc)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

10.1 Program Text

10.2 Program Data

10.3 Program Results

11 Optional Parameters

11.1 Description of the Optional Parameters

NAG Library Function Document

nag_real_symm_sparse_eigensystem_option (f12fdc)