NAG Library ManualKeyword Search:

NAG Library Function Document

nag_real_banded_sparse_eigensystem_init (f12afc)

▸▿ Contents

1 Purpose

2 Specification

3 Description

4 References

5 Arguments

6 Error Indicators and Warnings

7 Accuracy

8 Parallelism and Performance

9 Further Comments

10 Example

1 Purpose

nag_real_banded_sparse_eigensystem_init (f12afc) is a setup function for nag_real_banded_sparse_eigensystem_sol (f12agc) which may be used for finding some eigenvalues (and optionally the corresponding eigenvectors) of a standard or generalized eigenvalue problem defined by real, banded, nonsymmetric matrices. The banded matrix must be stored using the LAPACK column ordered storage format for real banded nonsymmetric matrices (see Section 3.3.4 in the f07 Chapter Introduction).

2 Specification

#include <nag.h>

#include <nagf12.h>

void	nag_real_banded_sparse_eigensystem_init (Integer n, Integer nev, Integer ncv, Integer icomm[], Integer licomm, double comm[], Integer lcomm, NagError *fail)

3 Description

The pair of functions nag_real_banded_sparse_eigensystem_init (f12afc) and nag_real_banded_sparse_eigensystem_sol (f12agc) together with the option setting function nag_real_sparse_eigensystem_option (f12adc) are designed to calculate some of the eigenvalues,

λ

, (and optionally the corresponding eigenvectors,

x

) of a standard eigenvalue problem

A x = λ x

, or of a generalized eigenvalue problem

A x = λ B x

of order

n

, where

n

is large and the coefficient matrices

A

and

B

are banded real and nonsymmetric.

This setup function initializes the communication arrays, sets (to their default values) all options that can be set by you via the option setting function nag_real_sparse_eigensystem_option (f12adc), and checks that the lengths of the communication arrays as passed by you are of sufficient length. For details of the options available and how to set them, see Section 11.1 in nag_real_sparse_eigensystem_option (f12adc).

4 References

Lehoucq R B (2001) Implicitly restarted Arnoldi methods and subspace iteration SIAM Journal on Matrix Analysis and Applications 23 551–562

Lehoucq R B and Scott J A (1996) An evaluation of software for computing eigenvalues of sparse nonsymmetric matrices Preprint MCS-P547-1195 Argonne National Laboratory

Lehoucq R B and Sorensen D C (1996) Deflation techniques for an implicitly restarted Arnoldi iteration SIAM Journal on Matrix Analysis and Applications 17 789–821

Lehoucq R B, Sorensen D C and Yang C (1998) ARPACK Users' Guide: Solution of Large-scale Eigenvalue Problems with Implicitly Restarted Arnoldi Methods SIAM, Philidelphia

5 Arguments

1: $n$ – IntegerInput: On entry: the order of the matrix $A$ (and the order of the matrix $B$ for the generalized problem) that defines the eigenvalue problem.

Constraint: $n > 0$ .
2: $nev$ – IntegerInput: On entry: the number of eigenvalues to be computed.

Constraint: $0 < nev < n - 1$ .
3: $ncv$ – IntegerInput: On entry: the number of Lanczos basis vectors to use during the computation.
At present there is no a priori analysis to guide the selection of ncv relative to nev. However, it is recommended that $ncv \geq 2 \times nev + 1$ . If many problems of the same type are to be solved, you should experiment with increasing ncv while keeping nev fixed for a given test problem. This will usually decrease the required number of matrix-vector operations but it also increases the work and storage required to maintain the orthogonal basis vectors. The optimal ‘cross-over’ with respect to CPU time is problem dependent and must be determined empirically.

Constraint: $nev + 1 < ncv \leq n$ .
4: $icomm [\max (1, licomm)]$ – IntegerCommunication Array: On exit: contains data to be communicated to nag_real_banded_sparse_eigensystem_sol (f12agc).
5: $licomm$ – IntegerInput: On entry: the dimension of the array icomm.
If $licomm = - 1$ , a workspace query is assumed and the function only calculates the required dimensions of icomm and comm, which it returns in $icomm [0]$ and $comm [0]$ respectively.

Constraint: $licomm \geq 140 or licomm = - 1$ .
6: $comm [\max (1, lcomm)]$ – doubleCommunication Array: On exit: contains data to be communicated to nag_real_banded_sparse_eigensystem_sol (f12agc).
7: $lcomm$ – IntegerInput: On entry: the dimension of the array comm.
If $lcomm = - 1$ , a workspace query is assumed and the function only calculates the dimensions of icomm and comm required by nag_real_banded_sparse_eigensystem_sol (f12agc), which it returns in $icomm [0]$ and $comm [0]$ respectively.

Constraint: $lcomm \geq 60 or lcomm = - 1$ .
8: $fail$ – NagError *Input/Output: The NAG error argument (see Section 2.7 in How to Use the NAG Library and its Documentation).

6 Error Indicators and Warnings

NE_ALLOC_FAIL: Dynamic memory allocation failed.
See Section 2.3.1.2 in How to Use the NAG Library and its Documentation for further information.
NE_BAD_PARAM: On entry, argument $〈value〉$ had an illegal value.
NE_INT: On entry, $n = 〈value〉$ .
Constraint: $n > 0$ .

On entry, $nev = 〈value〉$ .
Constraint: $nev > 0$ .
NE_INT_2: The length of the integer array comm is too small $lcomm = 〈value〉$ , but must be at least $〈value〉$ .

The length of the integer array icomm is too small $licomm = 〈value〉$ , but must be at least $〈value〉$ .
NE_INT_3: On entry, $ncv = 〈value〉$ , $nev = 〈value〉$ and $n = 〈value〉$ .
Constraint: $ncv > nev + 1$ and $ncv \leq n$ .
NE_INTERNAL_ERROR: An internal error has occurred in this function. Check the function call and any array sizes. If the call is correct then please contact NAG for assistance.

An unexpected error has been triggered by this function. Please contact NAG.
See Section 2.7.6 in How to Use the NAG Library and its Documentation for further information.
NE_NO_LICENCE: Your licence key may have expired or may not have been installed correctly.
See Section 2.7.5 in How to Use the NAG Library and its Documentation for further information.