By installing this software you agree to NAG's Terms and Conditions. Please note that these Terms and Conditions are subject to change without notice. The NAG Software Licence Terms and Conditions and details of revisions are available from https://www.nag.co.uk/content/nag-terms-conditions.
This implementation is a compiled, tested, ready-to-use version of the NAG Library that is considered suitable for operation on the computer systems detailed below:
hardware: Intel 64 systems and compatible (including AMD64) operating system: Linux 4.18.12-200.fc28.x86_64
(GNU C Library (GNU libc) stable release version 2.27.) and compatible [Note: requires libstdc++ from GCC 5.1.0 or later] Fortran compiler: GNU gfortran version 8.1 and compatible C compiler: GNU gcc version 8.1 and compatible vendor library: Intel MKL version 2019.0.3 and compatible
The NAG AD Library is not included in this implementation.
The definitions and sizes of the C Integer and Pointer types used in this implementation are shown in Section 3.5 of the Users' Note.
This implementation was produced at NAG Ltd., Oxford on the computing system detailed below:
hardware: Intel(R) Xeon(R) E5-2670 0 operating system: Linux 4.18.12-200.fc28.x86_64This implementation includes libraries (and associated files) for use with both 32-bit integers (denoted by lp64) and 64-bit integers (denoted by ilp64).
with GNU C Library (GNU libc) stable release version 2.27. and 3.4.25
(Fedora 28 (Twenty Eight)) Fortran compiler: GNU gfortran version 8.1 C compiler: GNU gcc version 8.1 vendor library: Intel MKL version 2019.0.3 Fortran compiler options: -O3 -fPIC -fno-second-underscore -m64 (with -fdefault-integer-8 for 64-bit integers) C compiler options : -O3 -fPIC -m64 -msse -msse2 -mfpmath=sse -fexceptions
For details of any other systems on which this implementation has been tested, please see the Supplementary Information page on our website.
Please see the Intel website for further information about MKL (https://software.intel.com/intel-mkl).
Please check the following URL:
https://www.nag.co.uk/doc/inun/nl27/l6idgl/supplementary.html
for details of any new information related to the applicability or usage of this implementation. Details of any other systems on which it has been tested may also be found on this page.
|- in.html (Installer's Note - this document)
|- doc -|- un.html (Users' Note)
| |- nag_tsandcs.txt (NAG Software Licence Ts & Cs)
| |- alt_c_interfaces.html (Advice on calling FL interface from C and C++)
|
| | (Files for 32-bit integer libraries)
| |
| | |- libnag_nag.a (static self-contained library
| | | including NAG BLAS/LAPACK)
| | |- libnag_nag.so.27 (shareable self-contained library
| | | including NAG BLAS/LAPACK)
| | |- libnag_nag.so (symbolic link pointing at
| |- lib -| libnag_nag.so.27)
| | |- libnag_mkl.a (static library requiring
| | | MKL BLAS/LAPACK)
| | |- libnag_mkl.so.27 (shareable library requiring
|- lp64 -| | MKL BLAS/LAPACK)
| | |- libnag_mkl.so (symbolic link pointing at
| | | libnag_mkl.so.27)
| |
| |- include -|- *.h (C include files for NAG Library routines)
| |
| |- nag_interface_blocks -|- * (Fortran interface blocks for
| | NAG Library routines)
nll6i27dgl -|
| | (Files for 64-bit integer libraries)
| |
| | |- libnag_nag.a (static self-contained library
| | | including NAG BLAS/LAPACK)
| | |- libnag_nag.so.27 (shareable self-contained library
| | | including NAG BLAS/LAPACK)
| | |- libnag_nag.so (symbolic link pointing at
| |- lib -| libnag_nag.so.27)
| | |- libnag_mkl.a (static library requiring
| | | MKL BLAS/LAPACK)
| | |- libnag_mkl.so.27 (shareable library requiring
|- ilp64 -| | MKL BLAS/LAPACK)
| | |- libnag_mkl.so (symbolic link pointing at
| | | libnag_mkl.so.27)
| |
| |- include -|- *.h (C include files for NAG Library routines)
| |
| |- nag_interface_blocks -|- * (Fortran interface blocks for
| | NAG Library routines)
|
| |- source --|- *.c (Example programs for CL
| | interface routines)
|- c_examples -|- data ----|- *.d
| | |- *.opt
| |
| |- results -|- *.r
|
| |- source --|- *.f90 (Example programs for FL
| | interface routines)
|- f_examples -|- data ----|- *.d
| | |- *.opt
| |
| |- results -|- *.r
|
| |- c_examples ---|- *.c (Example programs (subset)
| | for alternative C interface
|- c_headers -|- cpp_examples -|- *.cpp to FL routines)
| |
| |- data ---------|- *.d
|
| |- nag_example (script to compile and run
|- scripts -| NAG example programs)
| |
| |- nagvars.{sh,csh} (scripts to set environment variables
| | to location of NAG libraries, etc.)
| |
| |- nag_recompile_mods (script to recompile
| Fortran interface blocks)
|
|- mkl -|- * (Intel Math Kernel Library)
|
| |- bin -|- * (directories of licence management
| | binaries for supported platforms)
|- license -|- README.txt
|
|- doc -|- * (licence management documentation)
The following shows the directory and file organization of the Library Manual materials after installation.
nagdoc_27 -|- index.html
|
|- nlhtml Generic Documentation of the NAG Library
|- flhtml Documentation of FL Interfaces
|- clhtml Documentation of CL Interfaces
|- adhtml Documentation of AD Library
|
|- figures Figures
|
|- styles CSS and JavaScript used by the documentation
|
|- examples -|- baseresults HTML display of example results
|- source HTML display of example sources
|- data HTML display of example data files
Details of the software are given in the Users' Note (un.html).
Assuming you have downloaded the Library materials from our website as a tar gzip file (nll6i27dgl.tgz), cd to the directory where the file is located and extract the installation materials using the following command:
tar xvzf nll6i27dgl.tgzThis will extract the files install.sh, nl27.tgz, nag_tsandcs.txt, in.html and un.html.
If you have downloaded the Library Manual as a tar gzip file (mk27_doc.tgz), move the file into the same location as the Library materials. You can then install the materials from the download directory by executing the shell script install.sh in a command window as:
./install.shBy default, the materials will be installed under $HOME/NAG/, or if the directory $HOME does not exist, under /opt/NAG/. However, you may choose a different location. In this document we refer to the directory $HOME/NAG/nll6i27dgl or /opt/NAG/nll6i27dgl as [INSTALL_DIR]. This convention is also used in the Users' Note.
The install script can install the Library Manual in the
same location as the NAG Library material or at some other location of
your choice.
Alternatively, the Library Manual may be viewed from the NAG website
In order to enable the software, NAG will issue you with a licence key as follows. The licence key is contained in a text file consisting of details of the software that will be enabled. For evaluation purposes a trial licence may be used. Before obtaining a full licence you need to know the Kusari hostid of the system on which you intend to use this product. How to do this is described below.
To request a licence key, run the program khostid located in the license/bin/linux_x64 subdirectory of the software distribution. This utility must be run from a command prompt. Return the information that it displays, together with the product code (in this case NLL6I27DGL), by email to NAG. Alternatively, direct the output from this utility to a file and send both the file and the product code to NAG.
A short term (demonstration or trial) licence key contains one or more lines like the following:
NLL6I27DG TRIAL 2019/11/12 "EMnxidA3oeoj0F1Yvi5ibxPjB7"Specifically, it has a line containing the word TRIAL. Longer term licence keys must be locked to a specific computer, i.e. they will enable the software on one computer only. These licence keys typically include the word NODE or FULL instead of the word TRIAL above and may contain extra fields.
Once you have obtained one of the above licence keys, the easiest way to install it is to store the text in a file,
$HOME/nag.keyor
/opt/NAG/nag.keyor
/usr/local/NAG/nag.keyThe licence software in this implementation automatically looks for these particular files and reads the first one found, so no further action is necessary. Alternatively, store the licence in a file with a name and location of your choice, say,
[INSTALL_DIR]/licence.licThe location of the licence file, if it is not one of the default places listed above, must be made known to the NAG application by setting the environment variable NAG_KUSARI_FILE to the full pathname of the file before the application is invoked.
For example, in the C shell, type:
setenv NAG_KUSARI_FILE [INSTALL_DIR]/licence.licor in the Bourne shell, type:
NAG_KUSARI_FILE=[INSTALL_DIR]/licence.lic export NAG_KUSARI_FILE
Further details about Kusari and how it may be configured to suit your local circumstances (e.g. how to install the licence key on a server) are included in the Kusari Licence Management documentation in the license/doc/ subdirectory of the software distribution. See also the Kusari FAQ: https://www.nag.co.uk/content/kusari-frequently-asked-questions.
https://www.nag.co.uk/content/nag-technical-support-service
for information about the NAG Technical Support Service, including details of the NAG Technical Support Service contact points. We would also be delighted to receive your feedback on NAG's products and services.
https://www.nag.co.uk/content/worldwide-contact-information
for worldwide contact details for the Numerical Algorithms Group.