Your attention is drawn to the terms and conditions of the Software License Agreement (in file lic_agr.txt) regarding the use of NAG software. Any request to use this software other than on the licensed computer must be referred to NAG, as should requests for information about the availability of other implementations.
This implementation is a compiled, tested, ready-to-use version of the NAG Toolbox for MATLAB that is considered suitable for use on the computer systems detailed below:
hardware: x86-32 systems and compatible operating system: Microsoft Windows Vista/7/8 MATLAB version: 32-bit: 8.1 (R2013a), 8.2 (R2013b)
The user needs to have MATLAB installed. This implementation may work with later versions of MATLAB. More details may be available on the post release page (see Section 2.2).
Note that this implementation will not work with 64-bit versions of MATLAB; please use an appropriate 64-bit NAG Toolbox instead.
Please check the following URL:
http://www.nag.co.uk/doc/inun/mb24/w32dcl/postrelease.html
for details of any new information related to the applicability or usage of this implementation.
|- ?????.mexw32 (MEX-files, short function names)
|
|- nag_*.mexw32 (MEX-files, long function names)
|
|- nag_int*.m (Helper function source files)
mbw3224dcl -|- mex.w32 -|
| |- MBW3224DC.dll (NAG Library DLL)
| |
| |- *.dll (Supporting run-time libraries)
| |
| |- * (Other support files)
|
|- help -|- NAG -|- * (Help files and demo materials)
|
|- doc -|- in.html (Installer's Note (this document))
|
|- lic_agr.txt (Licence Agreement)
By default these files are installed under
You must have Administrator privileges to install this software.
If you have downloaded the toolbox materials from our website, run the self-extracting executable to start the installation.
If you have the toolbox materials on CD, insert the CD into your CD
drive to display the NAG CD browser. Click on the
e:\NAG_Installation_browser.exeto run the browser, or run e:\mbw3224dcl_setup.exe to run the toolbox installation directly, where e is the drive letter for your CD drive.
Note that we recommend that you install a separate instance of the toolbox for each version of MATLAB that you wish to use it with. However, if you install a new release of MATLAB and wish to use an existing installation of the toolbox with it, then this is possible by following the instructions in Section 4.1.1.
After installation, you should ensure that the software described in Section 3.1 is present and accessible.
You should access the toolbox documentation as follows. On starting the MATLAB documentation browser you should see a link labelled Supplemental Software. Clicking on that should open a browser with the entry NAG Toolbox in the Contents list.
A quick test that the software has been correctly installed is to type a00aa at the MATLAB prompt, which should print some implementation details. If this does not work correctly and you see messages such as "The referenced assembly is not installed on your system." then it may be necessary to reboot your computer so that MATLAB picks up the correct support libraries.
To test that a valid license is available, type a00ac at the MATLAB prompt. This will return 1 if a valid license is found, or 0 otherwise.
This software is provided with an uninstallation facility via
Control Panel|Programs|Uninstall a Programor
Control Panel|Programs and Features|Uninstall or change a program(depending on which view is displayed).
Running the setup program again will allow you to install another instance of the toolbox to a different location (e.g. for use with a different release of MATLAB).
If you choose to have your MATLAB path updated during installation,
the file toolbox\local\pathdef.m in your MATLAB installation
will be modified. If you
choose not to have your path modified, or you wish to use an existing
toolbox installation with a new installation of MATLAB, then there are a
number of ways
by which this may be done by hand. The easiest is to use the Set
Path button on the MATLAB GUI, but if you search for "matlab path" in
the MATLAB
online help system you will find pointers to several others.
If updating by hand then it is essential to ensure that the folder
containing the help files appears after that containing the executable files.
For example, if you installed the toolbox under
If the environment variable OMP_NUM_THREADS is not already set, you may optionally set it to either one or the maximum number of processors available on your system (or leave it unset), as part of the installation procedure, either for all users or for the current user only. (If it is already set, the existing value is not changed.)
Alternatively, the OMP_NUM_THREADS environment variable may be set from the Control Panel:
mbw3224dcl_setup.exe /SILENTor
mbw3224dcl_setup.exe /VERYSILENTfrom a Command Prompt. With the first version, the user sees what is happening on the screen as the installation procedure progresses, whereas with the second, nothing is displayed. The files will be installed to the default location, the MATLAB path file (pathdef.m) will be modified but the OMP_NUM_THREADS environment variable will not be modified. The default location may be overridden by using the /DIR flag, e.g.
In order to enable the software, NAG will issue you with a license key. The license key is a simple text file containing details of the software that will be enabled. For evaluation purposes a trial license may be used. To get a trial license contact the NAG Response Centre. Before obtaining a full license you need to know the Kusari hostid of the system on which you intend to use this product and how to do this is described below.
The easiest way to request a license key is to use the GUI described in the next section. Once you have a key, the same GUI can be used to install it.
The information below covers the most common requirements. For more complex licensing situations, please contact us.
Once you have your license key, the same GUI can be used to install the key in the registry.
You can execute this GUI from
Start|All Programs|NAG|Toolbox for MATLAB Mark 24|
Request or Install License Key for MBW3224DCL
(Under Windows 8, the shortcut appears under the list of all
applications. To find this, right-click on the background of the
Start screen and select All apps from the bottom right hand
corner of the screen. The shortcuts are listed under the NAG
section.)
This GUI can also be run from the installation procedure.
On-line documentation, accessible via the standard MATLAB help facilities, is bundled with this implementation. Please see Section 3.1.
The NAG Response Centres are available for general enquiries from all users and also for technical queries from sites with an annually licensed product or support service.
The Response Centres are open during office hours, but contact is possible by fax, email and phone (answering machine) at all times.
When contacting a Response Centre, it helps us deal with your enquiry quickly if you can quote your NAG site reference or account number and NAG product code (in this case MBW3224DCL).
The NAG websites provide information about implementation availability, descriptions of products, downloadable software, product documentation and technical reports. The NAG websites can be accessed at the following URLs:
NAG Ltd Wilkinson House Jordan Hill Road OXFORD OX2 8DR NAG Ltd Response Centre United Kingdom email: support@nag.co.uk Tel: +44 (0)1865 511245 Tel: +44 (0)1865 311744 Fax: +44 (0)1865 310139 Fax: +44 (0)1865 310139 NAG Inc 801 Warrenville Road Suite 185 Lisle, IL 60532-4332 NAG Inc Response Center USA email: support@nag.com Tel: +1 630 971 2337 Tel: +1 630 971 2337 Fax: +1 630 971 2706 Fax: +1 630 971 2706 Nihon NAG KK Hatchobori Frontier Building 2F 4-9-9 Hatchobori Chuo-ku Tokyo 104-0032 Nihon NAG Response Centre Japan email: support@nag-j.co.jp Tel: +81 3 5542 6311 Tel: +81 3 5542 6311 Fax: +81 3 5542 6312 Fax: +81 3 5542 6312 NAG Taiwan Branch Office 5F.-5, No.36, Sec.3 Minsheng E. Rd. Taipei City 10480 NAG Taiwan Response Centre Taiwan email: support@nag-gc.com Tel: +886 2 25093288 Tel: +886 2 25093288 Fax: +886 2 25091798 Fax: +886 2 25091798